Transition Networks SBFTF1015-120 - Manuals

Transition Networks SBFTF1015-120 – Manual in PDF format online.

Manuals:

Manual Transition Networks SBFTF1015-120

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9

Summary

Page 2 - c h a s s i s v e r s i o n; Copper and Fiber Ports; Part Number; Installation; Set the Dip Switches; only; Switches 2

2 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 * Typical maximum cable distance. Actual distance is dependent upon thephysical characteristics of the network. (TX) = transmit (RX) = receive ** SBFTF1029- 120 and - 121 are intended to be installed in the...

Page 3 - ALL; ONLY

4 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Set the Dip Switches -- Continued NOTE: Dip switch 4 (in the “SW” set) applies to fiber port 1 (F1). 4. Fiber Mode (Fiber Port 1) Up (Full-Duplex) - The cable distances for fiber p...

Page 4 - Connect the Fiber Cable; Connect the Twisted-Pair Copper Cable; AC

6 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued • If half-duplex mode is used, refer to the 512-Bit Rule (see page 9). • If full-duplex mode is used, the 512-Bit Rule does not apply. The cable lengths are constrained by the cabl...

Transition Networks Manuals