Transition Networks E-FRL-MC04 - Manuals

Transition Networks E-FRL-MC04 – Manual in PDF format online.

Manuals:

Manual

Manual Transition Networks E-FRL-MC04

Summary

Page 2 - NOTE: AUI cable can be used to connect to the transceiver.; TECHNICAL SPECIFICATIONS; Standards; Humidity; Warranty; Lifetime; DECLARATION OF CONFORMITY; OR

E-FRL-MC04 IN THE NETWORK NOTE: AUI cable can be used to connect to the transceiver. TECHNICAL SPECIFICATIONS Standards IEEE 802.3 Case Dimensions 2.8" x 1.75" x 0.75" (71mm x 43mm x 18mm) Environment Temperature: 0-40°C (32° to 104° F ) Humidity 10-90%, non condensing Altitude 0-10,000 ...

Page 3 - CABLE SPECIFICATIONS; Fiber-Optic Interface; INSTALLATION; Set Switches; transmission. Set according to network installation.; Install Cable; NOTE: See page 6 for cable specifications.; Connect to Power

CABLE SPECIFICATIONS The physical characteristics of the media cable must meet or exceed IEEE 802.3specifications. Fiber-Optic Interface 850nm M ULTIMODE Fiber Optic Cable Recommended: 62.5 / 125 µm multimode fiber Fiber Optic Transmitter Power: Average: -15 dBm Fiber Optic Receiver Sensitivity: Ave...

Page 4 - OPERATION; Status LEDs; Illuminated red LED indicates that unit is disabled.; Link; FAULT ISOLATION and CORRECTION; YES

OPERATION After installation, the transceiver should function without operator intervention. Status LEDs Use the status LEDs to monitor transceiver operation in the network. Jabber : Illuminated red LED indicates that unit is disabled. Collision: Flashing or illuminated red LEDindicates collisions. ...