Transition Networks 1004 - Manuals

Page 2 - Maximum Cable Length; 0BaseT Cable and Connector Specifications; Maximum Cable Length:

Model 1004 12-Port Ethernet™ Repeater Hub 20 CAUTION: RJ connectors are NOT INTENDED FORCONNECTION TO THE PUBLIC TELEPHONENETWORK. Failure to observe this caution could resultin damage to the public telephone network. Compliance InformationUL Listed C-UL Listed (Canada)CISPR/EN55022 Class A FCC Regu...

Page 3 - 2-Port EthernetTM Repeater Hub; Table of Contents; Model 1004 Repeater Hub Connectors, Indicators,; WARRANTY STATEMENT; ETHERNET CABLE SPECIFICATIONS; AUI Cable and Connector Specifications; 0BaseFL Cable and Connector Specifications; 0BaseFL Cable Characteristics:; 0Base5 Cable and Connector Specifications; 0Base5 Cable Characteristics:; Maximum number of terminal devices on Ethernet network:

Model 1004 12-Port Ethernet™ Repeater Hub Table of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Model 1004 Repeater Hub . . . . . . . . . . . . . . . . . . . . . . .1 Model 1004 Repeater Hub Features . . . . . . . . . . . . . . . . . . . . .1Networking the Model 10...

Page 4 - The Model 1004 Repeater Hub; Twelve fixed RJ-45 twisted-pair connectors

Model 1004 12-Port Ethernet™ Repeater Hub 18 1 1. INTRODUCTION This guide is intended for the system or network administratorresponsible for installing and monitoring a TRANSITION NetworksModel 1004 12-Port Ethernet™ Repeater Hub. A working knowledge oflocal area network (LAN) operations, including ...

Page 5 - Networking the Model 1004 Repeater Hub; SIC Connection; Warranty Statement

Model 1004 12-Port Ethernet™ Repeater Hub 2 17 Networking the Model 1004 Repeater Hub The Model 1004 Repeater Hub can be installed in an Ethernet networkby connecting 10BaseT cable between RJ-45 connectors on the front ofthe hubs. Additionally, the SIC slot on the back of the hub can be used toconne...

Page 6 - Connectors; Fault Isolation; Do network devices have Link Integrity enabled?; Technical Support Contact; Technical Support; or your local distributor.; RJ-45 Connector and Indicators

Model 1004 12-Port Ethernet™ Repeater Hub 16 3 1004 Repeater Connectors, Indicators andSwitch Connectors Twelve (12) RJ-45 10BaseT connectors are located on the front ofthe Model 1004 Repeater Hub. One (1) power connector is located on the back of the Model 1004Repeater Hub. NOTE: Slide-In cards (SI...

Page 7 - Monitoring Power LED; SITE CONSIDERATIONS

Model 1004 12-Port Ethernet™ Repeater Hub 4 15 4. OPERATION The Model 1004 Repeater Hub requires no intervention beyondoccasionally monitoring the Power and Status LEDs. Monitoring Power LED The green Power LED is illuminated when the Model 1004 RepeaterHub is connected to power. Monitoring Status L...

Page 8 - Connecting Power to Model 1004 Repeater

Model 1004 12-Port Ethernet™ Repeater Hub 14 5 Connecting Power to Model 1004 Repeater To power ON the Model 1004 Repeater: 1. At Model 1004 Repeater back, locate the Unit power receptacle and associated fuse. 2. Verify that fuse is installed at correct setting for power source voltage. NOTE: The in...

Page 9 - Male AUI Connector/PC Connection; Ensuring Correct 10BaseT Configuration

Model 1004 12-Port Ethernet™ Repeater Hub 6 13 Male AUI Connector/PC Connection The male AUI card (E-AUI-DC-SIC) provides a maleAUI connector forconnection, through an AUIdrop cable, to a 10Base5port on a powered PC. Fiber Optic Connector/10BaseFL Connection The fiber optic card (E-FRL-SIC) provides...

Page 10 - Unpacking the Model 1004 Repeater Hub; Item; Connecting 10Base5 Using AUI Drop Cable

Model 1004 12-Port Ethernet™ Repeater Hub 12 7 3. INSTALLATION To install the Model 1004 Repeater Hub: • Unpack the Model 1004 Repeater Hub.• Install Model 1004 Repeater Hub on flat surface. • Optionally install Slide In Card. • Connect Cable to SIC and RJ-45 connectors. • Connect Model 1004 Repeate...

Page 11 - Twisted Pair Connector/10BaseT Connection; wall plate; MDI switch set for cascade; Installing Slide-In Cards

Model 1004 12-Port Ethernet™ Repeater Hub Twisted Pair Connector/10BaseT Connection To connect 10BaseT Cable to Model 1004 Repeater RJ-45 connectors: 1. Locate or build 10BaseT cables that are: • 802.3 compliant (See page 18) • correct (straight through or crossover) cable configuration for site ins...

Page 12 - Connecting Cable to SIC/RJ-45 Connectors; BNC Connector/10Base2 Connection; Installing Model 1004 Repeater Hub

Model 1004 12-Port Ethernet™ Repeater Hub 10 9 Connecting Cable to SIC/RJ-45 Connectors Connections between installed Model 1004 Repeater Hub SICs orbetween a Model 1004 Repeater Hub SIC and a hub or terminaldevice include: • Female AUI Connector/10Base5 • Male AUI Connector/PC • RJ Connector/10Base...