Star Trac NAV REPEATER - Manuals

Star Trac NAV REPEATER – Manual in PDF format online.

Manuals:

Manual Star Trac NAV REPEATER

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15

Summary

Page 3 - English

1 Introduction Thank you for choosing the Star NAV Repeater which will display all necessarydata from your NMEA navigator. Power and NMEA data are connected on the reverse side of the instrument.The colour coded 4-pole jack plug makes the installation easy. 1.1 Part specification Star SEA Data is de...

Page 4 - think about how you can make the installation; A few ”do not’s” you should consider:; Do not rush, take your time. A neat installation is easy to do.; The following material is needed:; ”) drill for the mounting holes in wood.

2 Installation • The installation includes 6 major steps: 1. Read the installation and operation manual.2. Plan where to install the transducer and instrument.3. Install the transducer, then the instrument.4. Run the cables.5. Take a break and admire your installation.6. Learn the functions and cali...

Page 5 - Installing the instrument; PLUG FUNCTION CABLE

2.1 Installing the instrument • Place the adhesive drill template on the desired location for the instrument. Drill the four screw holes using a 2.8 mm ( 7 / 64 ”) drill for wood or 3.2 mm ( 1 / 8 ”) for fibre glass. Use a 52 mm (2 1 / 16 ”) hole saw to machine the clearance hole for the instrument ...

Star Trac Manuals