Page 4 - ABOUT THIS MANUAL; This manual is applicable to the; NTRODUCTION
4 620-7991 Rev 002 Thank you for adding the STAR TRAC PERSONAL VIEWING SCREEN (PVS) to your Star Trac Purchase. The Personal Viewing Screen has been designed to provide the user with the most re-warding experience based upon the carefully planned features it possesses. The design elements of this Pe...
Page 6 - DO NOT disassemble the PVS.; May cause electric shock and damage the display.; DO NOT spray any fluid directly on the surface of the monitor.
6 620-7991 Rev 002 W ARNINGS A ND C AUTIONS This lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclo-sure that may be of sufficient magnitude to constitute a risk of electri...
Page 7 - equipment as this can result in a risk of fire or electric shock.
7 620-7991 Rev 002 I MPORTANT S AFETY P RECAUTIONS Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest prior-ity on safety. But IMPROPER USE CAN RESU...
Page 8 - Center console keypad assembly
8 620-7991 Rev 002 U NPACKING Y OUR P ERSONAL V IEWING S CREEN Inspect the shipping box for any parts that may be missing BEFORE discarding the box. Items can shift dur-ing transportation, and may be accidentally discarded with the box. If any parts are missing, please contact Star Trac Product Supp...
Page 9 - Required Tool for Installation
9 620-7991 Rev 002 PAL/SECAM Kit (Europe, Middle East) • PVS assembly with mounting bracket, cables, and display cap with grommet (There are 5 cables in the neck) • Center console keypad assembly • Entertainment headphone jack and mount • Hardware tool kit, including: • (1) Headphone icon • (4) M8 x...
Page 10 - between the
10 620-7991 Rev 002 The Star Trac Personal Viewing Screen is different for each of your Star Trac E-Series Cardio prod-ucts. Make sure you have the proper kit for the E-Series product you are installing. The E-UBi, E-RBi, E-TBTi, and the E-STi will follow the same basic steps for installation. For t...
Page 12 - When removing bottom cover, gently; Retain screws for later use.
12 620-7991 Rev 002 STEP 8. Adjust the cap with the grommet into place. Using the 5mm Hex key, tighten the M8 buttonhead screws to 190 lb-in (21.5 N-m) of torque. Take the (2) Phillips head screws you removed from the original cap and snugly tighten screws down using a #2 Phillips screwdriver. Check...
Page 13 - You will no longer need the center console; Take the new PVS center console from the kit.
13 620-7991 Rev 002 STEP 12. insert the new center console into the front dis-play. Using a #2 Phillips screwdriver, screw in the (4) screws that were saved from the original center console. Tighten the screws so they are snug. STEP 10. Using a #2 Phillips head screwdriver, remove the (4) screws tha...
Page 14 - cradle on the front side of
14 620-7991 Rev 002 STEP 13. Note: If the iPod cable comes pre-installed on the cradle, skip this step. Take the iPod® cable from the kit. Install the cable into the iPod ® cradle on the front side of the display console by removing the plug from the cradle then inserting the cable through open-ing....
Page 19 - NSTALLING
19 620-7991 Rev 002 STEP 3. (E-TRx ONLY) Note: If you have an E-TR skip this step. Using a #2 Phillips screwdriver, remove the screw that holds in the blank headphone jack cap at the lower front of the Hot Bar. Retain the screw . You will no longer need the cap and, if desired, you can store it away...
Page 20 - Remove the center console.; You will no longer
20 620-7991 Rev 002 STEP 6. Take the Personal Viewing Screen from the PVS kit. Next, take the (3) M8 buttonhead screws, the M8 Hex nut with washer, and the 5mm Hex key from the PVS hardware tool kit. Mount the Personal Viewing Screen on the treadmill. Using the 5mm Hex key, screw in the (2) M8 butto...
Page 21 - through
21 620-7991 Rev 002 STEP 10. (E-TRx ONLY) Take the E-TR headphone jack from the PVS kit. Disassemble the headphone jack. Retain the screw and the board. Take the entertainment center console from the PVS Kit. Flip it over so you are looking at the back side. Mount the headphone jack board to the cen...
Page 23 - Connect the keypad tail to the
23 620-7991 Rev 002 STEP 15. Remove the nut and washer from the F-Type connector on the end of the coax cable you fed down the treadmill neck, then put connector through the mounting bracket. Replace the nut and washer, and tighten the nut snugly. Next replace mounting bracket into the neck, using t...
Page 24 - Do Not tighten screws at this time.
24 620-7991 Rev 002 STEP 17. Replace the top back plastic cover. Using a #2 Phillips screwdriver insert the (8) screws, re-tained from earlier step, into the plastic. Do Not tighten screws at this time. STEP 18. Check the cap with the neck and grommet. Make sure the cap is flush with the top back pl...
Page 25 - Turning On / Off the Power; Turning On
25 620-7991 Rev 002 S ETTING U P Y OUR P ERSONAL V IEWING S CREEN ( NTSC / ATSC ) Basic Operations Turning On / Off the Power Selecting the Input Signal Source Channel Selection Turning On Press the button on the control module, the unit will be turned on and you will be ready to use its features. T...
Page 26 - Adjusting Picture Menu Options; Adjusting the Picture; Option
26 620-7991 Rev 002 Adjusting Picture Menu Options Adjusting the Picture 1. Press VOL+ , CH+ and number button [3] at the same time to display the main menu. 2. Press VOL+ / - to select Picture menu, press CH- to access the menu. 3. Within the menu, press CH+ / - , VOL- to navigate through the optio...
Page 27 - Adjusting Audio Menu Options; Adjusting the Sound
27 620-7991 Rev 002 Adjusting Audio Menu Options Adjusting the Sound 1. Press VOL+ , CH+ and number button [3] at the same time to display the main menu. 2. Press VOL+ / - to select Audio menu, press CH- to access the menu. 3. Within the menu, press CH+ / - , VOL- to navigate through the options or ...
Page 29 - Adjusting Setup Menu Options; System Setup
29 620-7991 Rev 002 Adjusting Setup Menu Options System Setup 1. Press VOL+ , CH+ and number button [3] at the same time to display the main menu. 2. Press VOL+ / - to select Picture menu, press CH- to access the menu. 3. Within the menu, press CH+ / - , VOL- to navigate through the options or adjus...
Page 31 - The actual menu options of this rating vary.
31 620-7991 Rev 002 Adjusting Setup Menu Options (Continued) U.S. movie (MPAA) ratings None Movie is not rated. G General audiences. PG Parental guidance suggested. PG-13 Suitable for children 13 and older. R Parental guidance is suggested for children under 17. NC-17 No suitable for children under ...
Page 32 - Setup
32 620-7991 Rev 002 Adjusting Setup Menu Options (Continued) Option Description Closed Caption Allows you to select feature On or Off On: Turns on the Closed Caption. Off: Turns off the Closed Caption. Analog Caption Allows you to select closed caption options. CC1 , CC2 , CC3 , CC4: Displays a prin...
Page 33 - Adjusting Channel Menu Options; Accessing the Channel Settings
33 620-7991 Rev 002 Adjusting Channel Menu Options Accessing the Channel Settings 1. Press VOL+ , CH+ and number button [3] at the same time to display the main menu. 2. Press VOL+ / - to select Picture menu, press CH- to access the menu. 3. Within the menu, press CH+ / - , VOL- to navigate through ...
Page 34 - OK
34 620-7991 Rev 002 Adjusting Channel Menu Options (Continued) Add On CH Search Select to manually search for channels that can not be memorized. 1. In Channel menu, select Add On CH Search i tem, press VOL+ to access. 2. During Add On CH search, your unit searches for digital channels first. When t...
Page 35 - Basic Operations; or; Channel Selection
35 620-7991 Rev 002 S ETTING U P Y OUR P ERSONAL V IEWING S CREEN (PAL) Basic Operations Turning On / Off the Power Selecting the Input Signal Source Turning On Press the button on the control module, the unit will be turned on and you will be ready to use its features. Turning Off With the power on...
Page 36 - Customizing the Picture; Standard; User
36 620-7991 Rev 002 Adjusting Picture Menu Options Customizing the Picture 1. Press VOL+ , CH+ and number button [3] at the same time and the main menu screen displays. 2. Press VOL+ / - to select Picture menu, press CH- to access the menu. 3. Within the menu, press CH+ / - to scroll through the pag...
Page 37 - Adjusting Sound Menu Options; Adjusting the Volume; Adjusting Sound Mode
37 620-7991 Rev 002 Adjusting Sound Menu Options Adjusting the Volume Using the volume buttons ( VOL+ and VOL- ) Press the VOL + or VOL- to increase or decrease the volume. Note: Once the unit switches to other input sources or loses the power, the unit will clear your customized volume setting and ...
Page 38 - Adjusting Time Menu Options; Time Zone Selection
38 620-7991 Rev 002 Adjusting Time Menu Options Time Zone Selection To obtain local time, you should first set the local time zone. Obtaining local time depends on whether your local station has broadcast time zone information. 1. Press VOL+ , CH+ and number button [3] at the same time and the maint...
Page 39 - Mode; Program Number; Sleep Timer Setup
39 620-7991 Rev 002 Adjusting Time Menu Options (Continued) Option Description Mode Select one source to be viewed through On timer. Program Number Select a broadcasting program for On timer. With the Off Timer function On , the unit will automatically turn off at the preset time. 1. Navigate to the...
Page 40 - Adjusting System Options Menu
40 620-7991 Rev 002 Adjusting System Options Menu System Setup Option Description Language Select on-screen menus language. Hearing Impaired (Digital programs only) Press VOL+ / - to select On to display the subtitles (if available) for the hearing impaired. Select Off to turn off the function Audio...
Page 41 - Adjusting Lock Menu Options; Password Setup; To create a new password:; Set Password; Password
41 620-7991 Rev 002 Adjusting Lock Menu Options Password Setup To create a new password: 1. Press VOL+ , CH+ and number button [3] at the same time and the main menu screen displays. Press VOL+ / - to select Lock menu, press CH- to access the menu. 2. Now a password is required to input. Use number ...
Page 42 - Lock Tuning Setup
42 620-7991 Rev 002 Adjusting Lock Menu Options (Continued) Lock Tuning Setup 1. Navigate to the Lock menu and input the correct password to access. 2. Now the Lock Tuning item will be highlighted automati- cally. 3. Use VOL+ / - to turn on or turn off the Lock Tuning . Once you turn on Lock Tuning ...
Page 43 - Auto Channel Search; DTV Signal; Manual Searching for DTV programs
43 620-7991 Rev 002 Adjusting Channel Menu Options Auto Channel Search 1. Press VOL+ , CH+ and the number [3] at the same time, the main menu screen should be displayed. 2. Press VOL+ / - to select Channel menu, press CH- to ac- cess the menu. 3. Highlight Auto Tuning item, and press VOL+ or OK to a...
Page 44 - Manual Searching for ATV programs
44 620-7991 Rev 002 Adjusting Channel Menu Options (Continued) Manual Searching for ATV programs If desired analog programs cannot be searched by Auto Tun-ing, you can make use of ATV Manual Tuning to search pro- grams manually. 1. In Channel menu , press CH+ / - to select ATV Manual Tuning item, th...
Page 45 - Programme Edit
45 620-7991 Rev 002 Adjusting Channel Menu Options (Continued) Programme Edit Once in the Programme Edit submenu, press VOL+ or OK to access. Next, press CH+ / - to select item. Once the item is selected the following options are available: 1. DEL : • Press 1 to ”mark” selected item for deletion. • ...
Page 46 - FAQ’s; AND; Cleaning the Personal Viewing Screen; DO NOT; Troubleshooting; Problem
46 620-7991 Rev 002 FAQ’s AND T ROUBLESHOOTING Your Star Trac Personal Viewing Screen is designed with little maintenance in mind and rarely should you experience a problem once it is installed. However, you may find the cleaning and troubleshooting information in this section useful. We will also e...
Page 47 - Input; If your problem is not solved, turn your unit off and then on again.
47 620-7991 Rev 002 Troubleshooting (Continued) Problem Possible Solution Poor TV reception • Check the input signal cable, make sure it is in good shape and is connected snug to the RF input. • Try a new channel; it may be the station is having difficulties. • Check for local interference. • Try ad...
Page 48 - Headphone Jack Replacement.; that
48 620-7991 Rev 002 Headphone Jack Replacement. When you are experiencing poor audio output from your PVS, you should check the entertainment head-phone jack to see if it needs replacement. The headphone jack was designed for an easy and quick replace-ment. Before you begin, make sure your have the ...
Page 49 - • Reorient or relocate the receiving antenna.
49 620-7991 Rev 002 R EGULATORY I NFORMATION Radio Frequency Interference (RFI) Federal Communications Commission, Part 15 Warning: To prevent fire or electrical shock, do not expose this equipment to rain, mois-ture or excessive heat. The unit has been tested and found to comply with the limits for...
Page 52 - STAR TRAC
52 620-7991 Rev 002 STAR TRAC 14410 Myford Road Irvine, California 92606 Telephone: (800) 228-6635, (714) 669-1660 Fax: (714) 508-3303 http://www.startrac.com
