Star Trac Sep-80 - Manuals - manualsarea.com

Page 2 - Training Manual; Components that Connect to the Display Electronic:

Training Manual STAR TRAC FITNESS 2 of 19 637-1377 Rev: A Components that Connect to the Display Electronic:

Page 3 - –The main keypad that is used to enter commands.; Center Console; entertainment, there will be extra keys for that.

Training Manual STAR TRAC FITNESS 3 of 19 637-1377 Rev: A A. Display Panel (J7 – 12 Pin Connector) –The main keypad that is used to enter commands. B. Center Console (J8 – 6 Pin Connector) –The small keypad that has the ‘Quick Start’ key. If the unit has any kind of entertainment, there will be extr...

Page 4 - CSAFE Power

Training Manual STAR TRAC FITNESS 4 of 19 637-1377 Rev: A C. CSAFE Power (J10 – 6 Pin Connector) – The external CSAFE port. Note: This port is only used for supplying power to external add on audio accessories. D. Polar Receiver (J11 – 3 Pin Connector) – The telemetry/wireless heart rate (signal sen...

Page 5 - E. Contact Heart Rate (6 Pin Connector on the standoff HR Board); – The contact heart rate board plugs in here. Note:

Training Manual STAR TRAC FITNESS 5 of 19 637-1377 Rev: A E. Contact Heart Rate (6 Pin Connector on the standoff HR Board) – The contact heart rate board plugs in here. Note: The contact heart rate is typically mounted on the display electronics.

Page 6 - – The small keypad at the top of the display housing.

Training Manual STAR TRAC FITNESS 6 of 19 637-1377 Rev: A F. Fan Keypad (J1 – 8 Pin Connector) – The small keypad at the top of the display housing. G. Fan Power (J3 – 2 Pin Connector) – The fan gets power from the display electronic.

Page 7 - – The primary port for uploading

Training Manual STAR TRAC FITNESS 7 of 19 637-1377 Rev: A H. Primary Port (J6 – 10 Pin Connector) – The primary port for uploading software into the display. I. Secondary Port (J5 – 10 Pin Connector) – The secondary port for uploading software into the display.

Page 8 - – This is the main cable that connects the display to the LCB.

Training Manual STAR TRAC FITNESS 8 of 19 637-1377 Rev: A J. Display Cable (J4 – 12 Pin Connector) – This is the main cable that connects the display to the LCB. The display cable is like the nerves of the TBT. Information and power are sent up to the display and back down to the LCB to control the ...

Page 10 - Used for PVS and on ‘made for iPod’ kits only.

Training Manual STAR TRAC FITNESS 10 of 19 637-1377 Rev: A M. CCB (J14 – 7 Pin Connector) Used for PVS and on ‘made for iPod’ kits only.

Page 13 - with Upper Body Arm movement (Select Fit) need this connector.

Training Manual STAR TRAC FITNESS 13 of 19 637-1377 Rev: A Connections and Components that plug into the ADT LCB (PN: 721-1176) A. Brake Style Selector Switch (J2) – This switch allows the LCB to work with either brake style see document number 637-1348). B. CN7 - 8 Pin Connector – This connector is...

Page 14 - Supplies 12 Volts to the system.

Training Manual STAR TRAC FITNESS 14 of 19 637-1377 Rev: A C. Battery Connector (CN3 – 2 Pin Connector) – Delivers power to the display when there is no movement and charges the battery. D. External Power Connector (CN2 – 3 Pin Connector) – Supplies 12 Volts to the system.

Page 15 - This is where the external C-Safe cable plugs in to the LCB.

Training Manual STAR TRAC FITNESS 15 of 19 637-1377 Rev: A E. C-Save Connector (J1 – 8 Pin) – This is where the external C-Safe cable plugs in to the LCB. F. Display Cable Connector (CN1 – 12 Pin Connector) – Information and power are sent up to the display and back down to the LCB to control the un...

Page 16 - Brings in the power from the generator.

Training Manual STAR TRAC FITNESS 16 of 19 637-1377 Rev: A G. Generator Cable Connector (CN4 – 3 Pin Connector) – Brings in the power from the generator. H. Brake Cable Connector (CN5 – 2 Pin Connector) – Controls the brake resistance .

Page 17 - resistance when the user wants that.

Training Manual STAR TRAC FITNESS 17 of 19 637-1377 Rev: A 3. Mechanical/Drive Components: A. Drive belt – This belt connects the main pulley with the generator/brake to produce the needed voltage and create resistance when the user wants that.

Page 18 - B. Belt Tensioning Lever; both sides of the drive shaft.

Training Manual STAR TRAC FITNESS 18 of 19 637-1377 Rev: A B. Belt Tensioning Lever – Assures that the tension of the drive belt is always at the right level. C. Drive Shaft Alignment Screws – These are used for proper drive shaft/drive belt alignment. They are located on both sides of the drive sha...

Page 19 - Leg Roller and Guide Rod; – They are exposed to a lot of load. Front to rear motion only.

Training Manual STAR TRAC FITNESS 19 of 19 637-1377 Rev: A D. Leg Roller and Guide Rod – They are exposed to a lot of load. Front to rear motion only.