Star Trac IP-S6331 - Manual
Star Trac IP-S6331 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – INSTALLATION INSTRUCTIONS; THREAD LOCKER APPLICATION:; DO NOT USE A KNIFE OR BOX
- Page 6 – INSTALLING THE SEAT BOTTOM:
- Page 7 – GUIDE ROD LUBRICATION:; REAR FOOT ADJUSTMENT:
- Page 8 – INCREMENTAL WEIGHT ADJUSTMENT:; INCREMENTAL WEIGHT PLATE; INSTALLING THE SHROUDS:
- Page 12 – STAR TRAC
ABDOMINAL MACHINE
IP-S6331
INSTALLATION INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 INSTALLATION INSTRUCTIONS 1 • TORQUE WRENCH • • • • • • • • • • • • • • • • • • •• • • • • • • • • • • • • •• • • • • • • 1 • 8MM HEX KEY SOCKET • • • • • • • • • • • • • • • • • • •• • • • • • • • • • • • • • • #2 CROSS-HEAD (PHILLIPS) SCREWDRIVER • • • • • • • • • 1 1 • 6MM HEX KEY SOCKET •...
Page 6 INSTALLING THE ARM PIVOT (CAM SIDE): 1. Install the CAM/SHAFT assembly thru the bearings in the ARM PIVOT BRACKET and into the ARM PIVOT. 2. Install END CAP as shown with a M8 Washer and (M8, 20MM, Socket Head Screw). NOTE: Place the END CAP with the red rotational sticker toward the user. 3....
Page 7 GUIDE ROD LUBRICATION: 1. Apply a general purpose lubricant (such as 3-in-1 oil) that does not contain Teflon to a cotton cloth, then run the cotton cloth up and down the guide rods as needed. 2. Also apply oil to the incremental weight guide tracks. 3. Verify that the Top Plate and Increment...
