Star Trac IP-S6331 - Manuals

Page 3 INSTALLATION INSTRUCTIONS 1 • TORQUE WRENCH • • • • • • • • • • • • • • • • • • •• • • • • • • • • • • • • •• • • • • • • 1 • 8MM HEX KEY SOCKET • • • • • • • • • • • • • • • • • • •• • • • • • • • • • • • • • • #2 CROSS-HEAD (PHILLIPS) SCREWDRIVER • • • • • • • • • 1 1 • 6MM HEX KEY SOCKET •...

Page 6 INSTALLING THE ARM PIVOT (CAM SIDE): 1. Install the CAM/SHAFT assembly thru the bearings in the ARM PIVOT BRACKET and into the ARM PIVOT. 2. Install END CAP as shown with a M8 Washer and (M8, 20MM, Socket Head Screw). NOTE: Place the END CAP with the red rotational sticker toward the user. 3....

Page 7 GUIDE ROD LUBRICATION: 1. Apply a general purpose lubricant (such as 3-in-1 oil) that does not contain Teflon to a cotton cloth, then run the cotton cloth up and down the guide rods as needed. 2. Also apply oil to the incremental weight guide tracks. 3. Verify that the Top Plate and Increment...