Star Trac NXT 7000 - Manual
Star Trac NXT 7000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Instructions; AS SETUP; UNPACKING
- Page 3 – Installation of the Front Leg Assembly
- Page 5 – Installation of the Saddle and Seat Slider; Installation of the Pedals
- Page 9 – New Spinner Bike Install Rev A PN 620-7493.doc
Spinner® Bike
Installation Instructions
NXT 7000
ELITE 6900
PRO 6800
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 1 of 9Star Trac Product Support 800-503-1221 Page 1 of 9 Installation Instructions AS SETUP SPIN BIKE ASSEMBLY AND SETUP Use the following procedures to unpack and assemble your STAR TRAC SPINNER ® BIKE . Prepare the area that you will be unpacking and assembling the bike to be free from debris...
Page 2 of 9Star Trac Product Support 800-503-1221 Page 2 of 9 Assembly Following these steps in order will minimize the build time and ensure proper assembly. Note : Not all of the following procedures are performed on all models; Spinner ® Pro, Elite and NXT. If the procedure is particular to that ...
Page 4 of 9Star Trac Product Support 800-503-1221 Page 4 of 9 Installation of the Saddle and Seat Slider 1. Install the seat post into the frame and lower it to the lowest position and tighten the pop pin securely. 2. Slide the seat slide into the top of the seat post with the saddle pointed towards...
