Star Trac IP-S1315 - Manual
Star Trac IP-S1315 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – INSTALLATION INSTRUCTIONS; THREAD LOCKER APPLICATION:; DO NOT USE A KNIFE OR BOX
- Page 6 – INSTALLING THE ROM ADJUST AND CAM
- Page 7 – Insert the 20MM SHAFT with a flat.
- Page 9 – INSTALLING THE SEAT BOTTOM:
- Page 10 – GUIDE ROD LUBRICATION:; REAR FOOT ADJUSTMENT:
- Page 11 – INCREMENTAL WEIGHT ADJUSTMENT:; INCREMENTAL WEIGHT PLATE; INSTALLING THE SHROUDS:
- Page 14 – STAR TRAC
LEG CURL
IP-S1315
INSTALLATION INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 INSTALLATION INSTRUCTIONS 1 • TORQUE WRENCH • • • • • • • • • • • • • • • • • • •• • • • • • • • • • • • • •• • • • • • • 1 • 8MM HEX KEY SOCKET • • • • • • • • • • • • • • • • • • •• • • • • • • • • • • • • • • #2 CROSS-HEAD (PHILLIPS) SCREWDRIVER • • • • • • • • • 1 1 • 6MM HEX KEY SOCKET •...
Page 6 INSTALLING THE ROM ADJUST AND CAM ASSEMBLY: 1. Locate (from left to right) one (M8, 20MM, Socket Head Cup screw), one (M8, Washer), two (Taper Bearings) and the ROM ADJUST ASSEMBLY as shown. 2. Insert a taper bearing to the shaft of the ROM ADJUST ASSEMBLY until it bottoms all the way against...
Page 7 INSTALLING THE CAM ASSEMBLY : 5. Align the flat on the shaft with the D-Shaped slot on the CAM ASSEMBLY. INSTALLING THE SHIN PAD ASSEMBLY: 1. Locate one 20MM diameter SHAFT with a flat and the SHIN PAD assembly. 2. Align the SHIN PAD assembly to the ROM ADJUST BRACKET, as shown. 3. Insert the...
