Star Trac NAV REPEATER - Manual
Star Trac NAV REPEATER – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – English
- Page 4 – think about how you can make the installation; A few ”do not’s” you should consider:; Do not rush, take your time. A neat installation is easy to do.; The following material is needed:; ”) drill for the mounting holes in wood.
- Page 5 – Installing the instrument; PLUG FUNCTION CABLE
- Page 10 – NMEA input
- Page 13 – Cross track error alarm; XTE limit is always in nautical miles.
- Page 14 – Fault finding; Screen; Blank; No input; WARRANTY
OPERATION MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Introduction Thank you for choosing the Star NAV Repeater which will display all necessarydata from your NMEA navigator. Power and NMEA data are connected on the reverse side of the instrument.The colour coded 4-pole jack plug makes the installation easy. 1.1 Part specification Star SEA Data is de...
2 Installation • The installation includes 6 major steps: 1. Read the installation and operation manual.2. Plan where to install the transducer and instrument.3. Install the transducer, then the instrument.4. Run the cables.5. Take a break and admire your installation.6. Learn the functions and cali...
2.1 Installing the instrument • Place the adhesive drill template on the desired location for the instrument. Drill the four screw holes using a 2.8 mm ( 7 / 64 ”) drill for wood or 3.2 mm ( 1 / 8 ”) for fibre glass. Use a 52 mm (2 1 / 16 ”) hole saw to machine the clearance hole for the instrument ...
