Smeg TRA90BLP2 - Manuals

PRECAUTIONS - 9 91477A384/A e Disposal To dispose of the appliance:• Cut the power cable and remove it.• Deliver the appliance to the appropriate recycling centre for electrical and electronic equipment waste, or return it to the retailer when purchasing an equivalent product, on a one for one basis...

10 - DESCRIPTION 91477A384/A DESCRIPTION General description 1 Hob2 Control panel 3 Oven light 4 Seal 5 Door 6 Fan7 Storage compartment Hob AUX = Auxiliary BurnerSR = Semi-rapid BurnerR = Rapid BurnerUR2 int. = Ultra rapid internal burnerUR2 ext. = Ultra rapid external burner

12 - USE 91477A384/A Wok support Useful when using a wok. Deep tray Useful for collecting fat from foods placed on the rack above. Oven tray Useful for collecting fat from foods placed on the rack above and for cooking pies, pizzas, baked desserts, biscuits, etc. Rack To be placed over the top of th...

USE - 13 91477A384/A e the oven cavity. Tray rack The tray rack has to be inserted into the tray. In this way fat can be collected separately from the food which is being cooked. Trivets and reduction pan supports The trivets and reduction pan supports must be placed on the hob pan supports. Make su...

14 - USE 91477A384/A over. Using the storage compartment (where present) The storage compartment is in the bottom of the cooker. To open it, pull it towards you. It can be used to store cookware or metallic objects necessary when using the appliance. Using the oven Switching on the oven To switch on...

USE - 15 91477A384/A e ECO VAPOR CLEAN (on some models only) Digital programmer Minute minder timer button Cooking duration button End of cooking button Value decrease button Value increase button Setting the time On the first use, or after a power failure, the digits will be flashing on the applian...

16 - USE 91477A384/A 6. Press the and buttons at the same time to reset the programmer clock. Programmed cooking 1. Set the cooking time as described in the previous point Timed cooking. 2. Press the button. The cooking end time will appear on the display (current time plus cooking duration). 3. Pre...

USE - 17 91477A384/A e • Use a meat thermometer when roasting meat, or simply press on the roast with a spoon. If it is hard, it is ready; if not, it needs to be cooked for a few more minutes. Advice for cooking with the Grill • Meat can be grilled even when it is put into the cold oven or into the ...

18 - CLEANING AND MAINTENANCE 91477A384/A CLEANING AND MAINTENANCE Cleaning the appliance Cleaning the surfaces To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Roast pork neck 2 - 3 TURBO/CIRCULAIRE 2 180 - 190 170 - 180 Roast chicken 1.2 TURB...

CLEANING AND MAINTENANCE - 19 91477A384/A e Ordinary daily cleaning Always and only use specific products that do not contain abrasives or chlorine-based acids.Pour the product onto a damp cloth and wipe the surface, rinse thoroughly and dry with a soft cloth or a microfibre cloth. Food stains or re...

CLEANING AND MAINTENANCE - 21 91477A384/A e Cleaning the oven cavity In order to keep your oven in the best possible condition, clean it regularly after letting it cool down.Avoid letting food residue dry inside the oven cavity, as this could damage the enamel.Take out all removable parts before cle...

CLEANING AND MAINTENANCE - 23 91477A384/A e 3. After a few seconds, the and indicator lights remain on steadily and the appliance waits for the set start time to start the cleaning cycle. End of pyrolytic function 1. Turn the function knob to position 0 to exit the function. 2. Open the door and col...

24 - INSTALLATION 91477A384/A 3. Use a tool (e.g. a spoon) to remove the bulb cover. 4. Slide out and remove the light bulb. 5. Replace the light bulb with one of the same type (40 W). 6. Refit the cover. Ensure the moulded part of the glass (A) is facing the door. 7. Press the cover completely down...

INSTALLATION - 27 91477A384/A e 2. Attach the bracket B to the back of the cooker using the screw A that was removed in the previous step. 3. Carefully screw the connector 3 to the gas extension 1, placing the seal provided 2 between them. 4. Screw the assembled extension C to the gas connector D of...

32 - INSTALLATION 91477A384/A 4. When finished, replace the plate on the rear casing and secure it using the screws that were previously removed. Electrical connection General information Check the mains characteristics against the data indicated on the plate.The identification plate bearing the tec...