Smeg SHI410X - Manuals - manualsarea.com

Page 2 - INDEX; EN

2 2 INDEX RECOMMENDATIONS AND SUGGESTIONS ..................................................................................................................... 3 CHARACTERISTICS .............................................................................................................................

Page 3 - RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION; USE; MAINTENANCE

EN 3 3 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting f...

Page 4 - CHARACTERISTICS

EN 4 4 CHARACTERISTICS Components Ref. Q.ty Product Components 1 1 Hood Body, complete with: Controls, Light, Blower, Filters 2 1 Chimney Upper 7.1 1 Telescopic frame complete with extractor, consisting of: 7.1a 1 Upper frame 7.1b 1 Lower frame 9 1 Reducer Flange ø 150-120 mm 10 1 Flange ø 120 mm 10...

Page 5 - Dimensions; * Dimensions of the hood in ducting version.

EN 5 5 Dimensions * Dimensions of the hood in ducting version. ** Dimensions of the hood in recycling version. 650mm minimum

Page 6 - Drilling the Ceiling/shelf and fixing the frame; DRILLING THE CEILING/SHELF

EN 6 6 INSTALLATION Drilling the Ceiling/shelf and fixing the frame DRILLING THE CEILING/SHELF • Use a plumb line to mark the centre of the hob on the ceiling/support shelf. • Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct positi...

Page 7 - PREPARATION OF THE FRAME FOR THE HOOD IN RE-

EN 7 7 PREPARATION OF THE FRAME FOR THE HOOD IN RE- CYCLING VERSION In case the hood is used in recycling version it is neces-sary to prepare the frame with all the necessary connec-tion pieces. In order to make the installation easier it is necessary to lengthen the frame: • Unscrew the two screws ...

Page 8 - FIXING THE FRAME; Connections; DUCTED VERSION AIR EXHAUST SYSTEM

EN 8 8 FIXING THE FRAME • Lift the frame up, making sure that the index over the frame plate is turned forwards. • Fit the frame slots onto the two screws inserted in the ceiling as above, and turn until reaching the centre of the adjustment slot. • Tighten the two screws and fasten the other two sc...

Page 9 - Installing of the chimney and fixing of the hood; ELECTRICAL CONNECTION

EN 9 9 Installing of the chimney and fixing of the hood When the hood is installed in recycling version the chim-ney has to be positioned with the slots upwards. When the hood is installed in ducting version it has to be posi-tioned in the opposite way. • Place the chimney on the frame and fix it to...

Page 10 - Control panel

EN 1 10 USE L L1 T1 T2 T3 T4 L2 L3 L4 Control panel Button Function Led L Turns the lighting system on and off. - Press and hold for approx. 2 seconds to turn the lighting system on and off at reduced intensity. - T1 Turn the suction motor on and off at speed one. On. Press and hold the button for a...

Page 11 - Metal grease filters; Resetting the alarm signal; • Press button; Cleaning the Filters; back of the unit and at the same time pulling downward.

EN 1 11 MAINTENANCE Metal grease filters These can also be washed in the dishwasher, and need to be cleaned when all the command LEDs light up in a continuous manner or at least once every 2 months use, or more frequently if use is particularly intensive. Resetting the alarm signal • Press button T1...

Page 12 - start to flash, or at least once every 4 months.; Activating the alarm signal; • Press and hold the; Delay; and the following will be dis-; CHANGING THE ACTIVATED CHARCOAL FILTER; Changing the Filter; Lighting; LIGHT REPLACEMENT; two pins are properly inserted in the lamp holder socket

EN 1 12 Activated Charcoal Filter (Recirculation Version) • This cannot be washed or regenerated, and must be changed when all the command LEDs start to flash, or at least once every 4 months. Activating the alarm signal • In Recirculation Version Hoods, the Filter Saturation Alarm must be activated...