Smeg K7088D180SS - User Manual

K7088D/180

180cm wall mounted, twin chimney rangehood

ASC — automatic sensor control

dimensions

1800mmW x 500mmD x 1240mm maximum H

finish

satin stainless steel

installation

wall mount

motors

2 x 250 watt centrifugal motors —

each motor: twin impellors, double air uptake

air extraction

• duct direct to atmosphere — 150mm diameter ducting required

• recirculate to kitchen — 125mm diameter ducting required

NB: for recirculation, a recirculation diverter kit is supplied for each

chimney

capacity

each half: 750m³/hr net

illumination

4 x 20 watt halogens

noise rating

1 x 38 dBA minimum → 2 x 58 dBA maximum

speeds

four per motor

delay stop

five minute delay stop selection

controls

four buttons, one LED window

filtration

six removable four-ply stainless steel (washable)

prompts

via LED window flashing —

• five-minute delay stop

• 30-hour stainless steel filter cleaning prompt

• 120-hour charcoal filter inspection prompt

supplied

• two one-way, non-return butterfly valves — removable

• two 150-125mm diameter duct size adaptors

• two recirculation diverter kits

accessory

optional activated charcoal filter for each motor, part number 08999802

warranty

two years on parts and labour

ASC AutomAtiC SenSing Control

By selecting this button, the K7088D/180 automatically

senses any vapours, smoke and odours caused by the

cooking process and adjusts the speed of extraction

accordingly. The ASC will also sense and capture an

abnormal presence of gas.

DelAY StoP

When cooking is finished, it is recommended that the

rangehood be left running for a few minutes, even at a

lower speed, to pull through all residual heat, grime and

odours. Selecting the DELAY STOP eliminates the need

to return to the rangehood to turn it off manually. It will

also turn off the lights if they were previously left on.

Filter inSPeCtion PromPtS

After 30 hours of use, the LED window will visually prompt

for you to inspect the five stainless steel grease filters

for possible washing. The cleaner the filters, the more

effective is the airflow. The controls are simply reset to

zero hours and the counting starts over. The filters can

be cleaned at any time, without waiting for the prompt.
After 120 hours of operation, there is an additional

prompt to check the charcoal filters if they have been

fitted for the recirculation mode.

DuCting to AtmoSPhere

Extracting the air direct to atmosphere ensures the

maximum removal of grease/oil/particle-laden vapour,

odours and, very importantly, the heat — resulting in

a cleaner, more comfortable cooking environment.

An internal ducting pipe could, ideally, continue in a

straight line within the decorative flue to the kitchen

roof, then through the roof cavity and exit via a roof

cowl. If the rangehood is mounted against an external

wall, the ducting could, as effectively, exit at the rear

anywhere along the vertical line of the concealing

decorative flue and at a position that is structurally

feasible for an external wall cowl.

reCirCulAtion

When the cooking vapours cannot be ducted to

atmosphere, that is, the rangehood is mounted on an

internal wall and/or there is another storey above, the

supplied recirculation kit is inserted into the telescopic

flue. An activated charcoal filter can be fitted below the

centrifugal motor. This will effectively diminish cooking

odours. The charcoal filter is not to be washed and is

replaceable.

DuCting mAteriAl

The smooth internal walls of either galvanised sheet

metal piping or high temperature-resistant PVC will assist

in both greater unobstructed air flow and a quieter

operation. Flexible ducting can be considered for the

very short run and difficult obtuse bends.

ChArCoAl Filter

In the recirculation mode, the rangehood is also sending

the cooking odours back into the kitchen. An activated

charcoal filter panel, part number 08999802, can be

inserted just below the motor housing to effectively

diminish the cooking odours. This charcoal filter is not to

be washed; however, it is replaceable.

ID010708

code K7088D180