Smeg SFPA6925P2 - Manuals

Instructions 7 EN • Before carrying out any work on the appliance (installation, maintenance, positioning or moving), wear personal protective equipment. • Before carrying out any work on the appliance, disconnect the mains power supply. For this appliance • Ensure that the appliance is switched off...

Instructions 8 To dispose of the appliance:• Cut the power supply cable and remove it along with the plug. • Deliver the appliance to the appropriate recycling facility for electrical and electronic equipment waste, or deliver it back to the retailer when purchasing an equivalent product, on a one f...

Description 9 EN 2 Description 2.1 General Description Multifunction and Pyrolytic models

Description 11 EN Models with Pizza stone 1 Control panel 2 Oven light 3 Seal 4 Door 5 Fan 6 Rack/tray support frames 7 Pizza stone (on some models only) 8 Oven light (on some models only) Frame shelf

Description 14 2.4 Available accessories Rack Useful for supporting containers with food during cooking. Tray rack To be placed over the top of the oven tray; for cooking foods which may drip. Oven tray (on some models only) Useful for collecting fat from foods placed on the rack above. Deep tray Us...

Use 16 3 Use 3.1 Instructions 3.2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. 3. Remove and wash all the appliance accessories (se...

Use 17 EN 3.3 Using the accessories Racks and trays Racks and trays have to be inserted into the side guides until they come to a complete stop.• The mechanical safety locks that prevent the rack from being removed accidentally must face downwards and towards the back of the oven cavity. Tray rack T...

Use 18 Cover and pizza stone (on some models only) With the oven cold, remove the cover from the bottom and insert the pizza stone. Make sure that the stone is inserted correctly in the recess provided. For cooking, use the special + function. 3.4 Using the oven Display Multifunction models Pyrolyti...

Use 19 EN Eco-logic indicator light Pyrolytic cycle indicator light (pyrolytic models only) Showroom indicator light Minute minder timer indicator light Timed cooking indicator light Programmed cooking indicator light Clock indicator light Child lock indicator light Pizza function indicator light (o...

Use 20 Setting the time On the first use, or after a power failure, will flash on the appliance’s display. To be able to start any cooking function, the current time must be set.1. Turn the temperature knob to set the time displayed (keep the knob turned to increase or decrease it more quickly). 2. ...

Use 21 EN Functions list ECO This low energy consumption function is particularly suitable for cooking on a single shelf.Ideal when cooking meat, fish and vegetables. It is not recommended for foods that require proving.For greater energy savings and to reduce the time required, it is recommended to...

Use 22 Baker’s function The combination of the fan with just the bottom heating element allows cooking to be completed more rapidly. This system is recommended for sterilising or for finishing off the cooking of foods which are already well-cooked on the surface, but not inside, which therefore need...

Use 23 EN Timer 1. Press the temperature knob once (twice if cooking is already in progress). The display shows and the indicator light flashes. 2. Turn the knob to set the duration (from 1 minute to 4 hours). After a few seconds, the indicator light stops flashing and the countdown starts. 3. Selec...

Use 25 EN Programmed cooking 1. After selecting a cooking function and temperature, press the temperature knob three times. The display shows and the indicator light flashes. 2. Turn the knob right or left to set the cooking duration from 00:01 to 12:59. Keep the knob turned to increase or decrease ...

Use 26 5. At the end of cooking appears on the display and a buzzer sounds. 6. To turn off the buzzer, press or turn one of the two knobs or open the door. Modifying the data set during programmed cooking During operation, it is possible to modify programmed cooking duration: 1. When the and indicat...

Use 27 EN Advice for cooking meat • Cooking times vary according to the thickness and quality of the food and to consumer taste. • Use a meat thermometer when roasting meat, or simply press on the roast with a spoon. If it is hard, it is ready; If not, it needs another few minutes cooking. Advice fo...

Use 28 3.6 Special functions Defrost by time 1. Place the food to be heated inside the oven. 2. Press and turn the function knob to select the defrost by time function . 3. Turn the temperature knob to set the duration (from 1 to 99 minutes). 4. Press the temperature knob to confirm the set duration...

Use 29 EN Sabbath mode 1. Press and turn the function knob to select Sabbath mode . 2. Turn the temperature knob to modify the temperature of the function. 3. Press the temperature knob to confirm the set temperature. flashes. 4. Press the function knob to start Sabbath mode. 5. Keep the function kn...

Use 30 Defrost by weight 1. Place the food to be heated inside the oven. 2. Press and turn the function knob to select the defrost by weight function indicated by and the illuminated food symbols . 3. Press the function knob to confirm the defrost by weight function. 4. Turn the function knob to sel...

Use 31 EN 3.7 Automatic programs The automatic programs are divided into the type of foods to be cooked.1. Press and turn the function knob to select cooking with automatic programs indicated by and the illuminated food symbols . 2. Press the function knob to confirm cooking with automatic programs....

Use 32 Automatic programs table MEAT (01 - 05) FISH (06 - 07) VEGETABLES (08 - 10) (1) When you grill food, it is recommended to cook it on both sides referring to the times indicated in the table. The longer length of time indicated always refers to the first side to be cooked starting from the unc...

Use 33 EN DESSERTS/PASTRIES (11 - 13) BREAD - PIZZA - PASTA (14 -20) (2) (Models without Pizza stone) The stone must be placed on the bottom of the oven cavity. Frozen pizzas of different weights cooked on the stone do not require different cooking times. Pr Subcategory Weight (g) Level Function Tem...

Use 34 3.8 Secondary menu The appliance also has a drop-down secondary menu allowing the user to:• Activate or deactivate the Child Lock.• Activate or deactivate Showroom mode (which disables all the heating elements so that only the control panel works). • Activate or deactivate the Low Power mode ...

Use 35 EN Showroom mode (for exhibitors only) This mode allows the appliance to deactivate all heating elements, while keeping the control panel active. In order to use the appliance normally, set this mode to OFF . Eco-logic mode This mode allows the appliance to limit the power used. Suitable for ...

Use 36 Keep Warm mode This mode allows the appliance to keep cooked food warm (at low temperatures) for approximately 1 hour after a cooking cycle finishes for which a duration has been set (if this is not manually interrupted). Timed light mode (Eco-light) For greater energy savings, the light is t...

Cleaning and maintenance 37 EN 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the surfaces To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Ordinary daily cleaning Always use only specific products that do not contain abrasives or chl...

Cleaning and maintenance 38 4.3 Cleaning the door Removing the door For easier cleaning, it is recommended to remove the door and to place it on a tea towel.To remove the door proceed as follows:1. Open the door completely and insert two pins into the holes on the hinges indicated in the figure. 2. ...

Cleaning and maintenance 39 EN Removing the internal glass panels For easier cleaning, the internal glass panels of the door can be removed.1. Remove the internal glass panel by pulling the rear part gently upwards, following the movement indicated by the arrows ( 1 ). 2. Then, pull the front part u...

Cleaning and maintenance 40 4.4 Cleaning the oven In order to keep your oven in the best possible condition, clean it regularly after letting it cool down.Do not allow food residues to dry inside the oven cavity because doing so could damage the enamel.Before cleaning, remove all the parts that can ...

Cleaning and maintenance 41 EN Cleaning the top of the oven cavity (not on pyrolytic models) The appliance is equipped with a tilting grill element that allows for easy cleaning of the upper part of the oven compartment.1. Free the upper heating element by gently lifting it and rotating its retainin...

Cleaning and maintenance 42 Cleaning the pizza stone (on some models only) The pizza stone should be washed separately according to the following instructions: T he stone must be cleaned after every use. Do not heat it again if it has any encrustations. To clean, pour 55 cc of vinegar onto the stone...

Cleaning and maintenance 43 EN • For models with pizza stone: Remove the accessories from inside the oven cavity, apart from the rack/tray support frames. • Place a tray on the bottom shelf.• Pour approximately 40 cc of water into the tray. Make sure it does not overflow from the tray. • For Multifu...

Cleaning and maintenance 44 Vapour Clean setting 1. Press and turn the function knob to select the Vapour Clean function. The duration and temperature of the cleaning cycle will appear on the display. 2. Press the function knob to start the automatic cleaning cycle. Programmed Vapour Clean Just like...

Cleaning and maintenance 45 EN End of the Vapour Clean cycle When finished, appears on the display and a buzzer will sound that can be deactivated by pressing the temperature knob.1. Keep the function knob pressed for at least 3 seconds to exit from the function. 2. Open the door and wipe away the l...

Cleaning and maintenance 46 Pyrolytic function setting 1. Use the function knob to select one of the cleaning functions or . 2. Turn the temperature knob to the right or to the left to set the duration of the cleaning cycle from a minimum of 2 hours to a maximum of 3 hours (except for the function w...

Cleaning and maintenance 47 EN Setting of programmed pyrolytic cycle It is possible to program the pyrolytic cycle start time.1. After selecting the pyrolytic cycle duration, press the temperature knob. The display shows the current time and the indicator light comes on. 2. Turn the temperature knob...

Cleaning and maintenance 48 Replacing the internal light bulb 1. Completely remove all accessories from inside the oven. 2. Remove the rack/tray support frames.3. Remove the bulb cover using a tool (e.g. a screwdriver). 4. Slide out and remove the light bulb. 5. Replace the lamp with one of the same...

Installation 50 5 Installation 5.1 Electrical connection General information Check the grid characteristics against the data indicated on the plate.The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.Do not remove this plate for an...

Installation 51 EN 5.3 Positioning Position of the power cable (rear view) Front panel seal Glue the supplied seal to the rear part of the front panel to avoid water or other liquids from leaking in. Heavy appliance Crushing hazard • Position the appliance into the cabinet cutout with the help of a ...

Installation 52 Fastening bushings 1. Remove the bushing covers on the front of the appliance. 2. Mount the appliance into the recess.3. Secure the appliance to the piece of furniture using screws. 4. Cover the bushings with the previously removed covers. Appliance overall dimensions (mm)