Smeg SC45VB2 - Manuals

Smeg SC45VB2 Oven – User Manual in PDF format online.

Manuals:

User Manual

User Manual Smeg SC45VB2

Summary

Page 2 - Table of Contents; EN

Table of Contents EN INSTRUCTIONS FOR THE USER : these provide recommendations for use, a description of the controls and the correct procedures for cleaningand maintaining the appliance INSTRUCTIONS FOR THE INSTALLER : these are intended for the qualified engineer who is to install, commission and ...

Page 3 - Precautions for Use; PRECAUTIONS FOR USE

Precautions for Use EN 1 1 PRECAUTIONS FOR USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. TAKE GOOD CARE OF IT AND KEEP IT TO HAND THROUGHOUT THE OVEN'S LIFE CYCLE. WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE APPLIANCE. INSTALLATION MUST BE C...

Page 4 - Disposal Instructions; DISPOSAL INSTRUCTIONS -; deliver the appliance to your local organisation authorised to

Disposal Instructions EN 2 2 DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY Our products are only packaged using non-pollutant, environment-friendly, recyclable materials. We urge you to cooperate by disposing of the packaging properly. Contact your local dealer or the competent local organisations ...

Page 5 - Safety Precautions; SAFETY PRECAUTIONS

EN Safety Precautions 3 3 SAFETY PRECAUTIONS REFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILATION FUNCTIONS. IN YOUR INTEREST AND TO ENSURE YOUR SAFETY, BY LAW ALL ELECTRIC APPLIANCES MUST ONLY BE INSTALLED AND SERVICED BY QUALIFIED STAFF, ...

Page 6 - WHEN OPENING THE DOOR DURING OR UPON COMPLETION OF; ventilation openings

EN Safety Precautions 4 WARNING: ACCESSIBLE PARTS MAY BECOME HOT DURING USE. YOUNG CHILDREN SHOULD BE KEPT AWAY. WARNING: DURING USE THE APPLIANCE BECOMES VERY HOT. CARE SHOULD BE TAKEN TO AVOID TOUCHING HEATING ELEMENTS INSIDE THE OVEN. RISK OF BURNS! WARNING! WHEN OPENING THE DOOR DURING OR UPON C...

Page 8 - Instructions for the User; GET TO KNOW YOUR OVEN; Perforated container:

EN Instructions for the User 6 4 GET TO KNOW YOUR OVEN 1. – Door window glass 6. – Non-perforated container 2. – Catches 7. – Rack 3. – Lamp 8. – Shelf guides 4. – Control panel 9. – Sponge 5. – Perforated container 5 ACCESSORIES AVAILABLE Perforated container: suitable for cooking fresh or deep fro...

Page 9 - BEFORE INSTALLATION

EN Instructions for the User 7 6 BEFORE INSTALLATION Never leave packaging residues unattended in the home. Separate waste packaging materials by type and consign them to the nearest separate disposal centre. The inside of the appliance should be cleaned to remove all manufacturing residues. For fur...

Page 10 - DESCRIPTION OF FRONT PANEL CONTROLS

EN Instructions for the User 8 7 DESCRIPTION OF FRONT PANEL CONTROLS All the appliance's control and monitoring devices are placed together on the front panel. The table below provides the key to the symbols used. Function’s parameters knob This knob allows you to set the time, select the cooking te...

Page 12 - USING THE OVEN; Precautions and General Advice; Setting the current time and the water hardness level

EN Instructions for the User 10 8 USING THE OVEN 8.1 Precautions and General Advice When the oven is used for the first time, it should be heated to the maximum temperature for long enough to burn off any oily residues left by the manufacturing process, which might contaminate foods with unpleasant ...

Page 13 - SOFT; HARD; WATER FEEDING; Refilling the water; Only fill the water

EN Instructions for the User 11 Press PT1 to confirm the water hardness level. TYPE WATER HARDNESS disp 1 Ca + Mg (ppm) English deg. [°eH] French deg. [°dF] German deg. [°dH] SOFT WATER 0 TO 150 0 TO 11 0 TO 15 0 TO 8 SOFT MEDIUM WATER 151 TO 350 12 TO 25 16 TO 35 9 TO 20 MED HARD WATER 301 TO 500 2...

Page 14 - Water levels indication; DEP; 0 SELECTING THE FUNCTION

EN Instructions for the User 12 9.2 Water levels indication The steamer indicates the existing water quantity in the tank through 3 levels, which correspond to the following percentages: - – 0% to 20% - – 20% to 60% - – 60% to 100% Remark: don’t refill the tank, if it’s placed. Please remove it comp...

Page 15 - Turn PT1 to the right or left to change the preset cooking duration.

EN Instructions for the User 13 10.1.1 Steam function (Manual program) After selecting this function, press PT1 to modify the preset parameters of cooking time and temperature. The temperature light starts to blink. Turn PT1 to the right or left to change the preset temperature. Press PT1 to validat...

Page 16 - and the DSP2 starts to blink.

EN Instructions for the User 14 Press PT2 to immediately start the cooking process or otherwise press PT1 to set a different time for the cooking process start (please refer to point “7.4.7 Delayed Start Time”). The temperature will be automatically set to achieve the best results. The following tab...

Page 17 - When the oven is working...

EN Instructions for the User 15 The cooking duration is calculated based on the food’s type but can be changed by pressing PT1. Turn PT1 to the right or left to change the preset cooking duration. Press PT2 to immediately start the defrost process or otherwise press PT1 to set a different time for t...

Page 19 - The; Secondary menu

EN Instructions for the User 17 10.2.4 End of a cooking cycle At the end of the set duration or when you press PT2 to finish the cooking cycle, you will hear three beeps and the display will show the word “End” flashing, the oven starts the steam-reduction function. This function gradually releases ...

Page 20 - End; Changing the water hardness level

EN Instructions for the User 18 10.3.2 Descale function Warning: For safety reasons, the descaling process cannot be interrupted and it takes about 45 minutes. The appliance can be descaled with the appliance door open or closed. (See 11.1) To run a descaling cycle proceed as follows: With the oven ...

Page 21 - pressed until the message OFF SHO appears on DSP1. Now press PT1

EN Instructions for the User 19 10.3.4 Child safety lock-out function With the oven in OFF status (see point “8.2 Operating settings”) keep PT1 pressed until the message OFF SHO appears on DSP1. Now press PT1 until the message “OFF BLOC” appears on DPS1. Turn PT1 to the right or left to activate (ON...

Page 22 - Display messages; VAP; Cooling fan system; The oven light comes on:

EN Instructions for the User 20 10.4 Display messages DISPLAY DESCRIPTION DESCALING SOFT SOFT SOFT SOFT SOFT WATER. med med med med MEDIUM WATER. hard hard hard hard HARD WATER. CAL CAL CAL CAL APPLIANCE MUST BE DESCALED. FLASHING – DESCALING STARTS. 0.5L 0.5L 0.5L 0.5L FEED 0.5 LITRE DESCALING SOLU...

Page 23 - 1 RECOMMENDED COOKING TABLES; appliance does not get dirty.

EN Instructions for the User 21 11 RECOMMENDED COOKING TABLES For more detailed information about cooking refer to the following tables. The suggested times and temperatures are guideline values. The actual cooking time can vary according to the type and quality of the foods. The levels indicated in...

Page 27 - in the 2nd or 3rd level and in the 1st level.

EN Instructions for the User 25 11.11 Defrost VEGETABLES / SIDE DISH TEMPERATURE (ºC) TIME (MIN.) CONTAINER LEVEL BROCCOLI FLORETS WITH STALK 40 15-20 PERFORATED 2 MIXED VEGETABLES 40 15-20 PERFORATED 2 SPINACH LEAVES PORTIONS 40 10-15 NOT PERFORATED 2 CAULIFLOWER FLORETS 40 15-20 PERFORATED 2 PEAS ...

Page 28 - 2 CARE AND MAINTENANCE; deposited inside the steam generator.; descale procedure is performed; Suitable descaling solutions; Oven Cleaning). If the steam oven is not kept clean its surface may; and this may shorten the oven’s working life.

EN Instructions for the User 26 12 CARE AND MAINTENANCE 12.1 Descaling Whenever steam is produced, irrespective of the hardness of the local water supply (i.e. the limescale content of the water), limescale is deposited inside the steam generator. The time interval between descaling depends on the h...

Page 29 - Removing the shelf guides; Unscrew and remove the knurled nuts 1 in the front of the shelf

EN Instructions for the User 27 12.5 Removing the shelf guides 1. Unscrew and remove the knurled nuts 1 in the front of the shelf guides in an anti-clockwise direction. 2. Unscrew and loosen the knurled nuts 2 in the back of the shelf guides in an anti-clockwise direction. Do not completely remove t...

Page 30 - Removing the appliance door; Open the appliance door as far as it will go.

EN Instructions for the User 28 12.6 Removing the appliance door 1. Open the appliance door as far as it will go. 2. Insert 2 pins inside the holes in the hinges. 3. Close the appliance door just enough that it can be lifted out. 4. To reassemble, push the hinges into the holes from the front. 5. Op...

Page 31 - 3 OVEN CLEANING; Cleaning should be done with the oven power switched off.; In an oven with a finger print proof treatment front; , use a mild glass; Do not use oven sprays or other aggressive or abrasive; water and dishwashing liquid.

EN Instructions for the User 29 13 OVEN CLEANING Warning! Cleaning should be done with the oven power switched off. Take the plug out of the socket or switch off the oven’s power circuit. Warning! Do not use aggressive or abrasive cleaning products, scourers that scratch surfaces or sharp objects, s...

Page 32 - 4 EXTRAORDINARY MAINTENANCE; What should I do if the oven doesn’t work?; WARNING! Any type of repair must only be done by a specialised; Failure description

EN Instructions for the User 30 14 EXTRAORDINARY MAINTENANCE Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind are provided below. Before carr...

Page 33 - Replacing the light bulb; 5 INSTALLING THE APPLIANCE; Before installation

EN Instructions for the User 31 14.2 Replacing the light bulb To replace the light bulb, proceed as follows: Disconnect the oven from the power supply. Take the plug out of the socket or switch off the oven’s power circuit. Unscrew and remove the glass light cover (1) . Remove the light bulb (2). Wa...

Page 34 - Instructions for the Installer; Electrical connection; visible position on the oven door frame.; mm; overheating or burns.

EN Instructions for the Installer 32 During installation, make sure that the power cable does not come into contact with any moisture or objects with sharp edges and the back of the oven. High temperatures can damage the cable. Warning: after the oven is installed you must make sure you can access t...

Page 35 - Positioning the oven; have an opening 100 mm deep.

EN Instructions for the Installer 33 15.3 Positioning the oven The appliance is designed for building-in to cabinets made from any heat-resistant material. Comply with the dimensions shown in following pictures. When installing in tall units bear in mind that the top/rear of the unit must have an op...

Page 36 - ód