Page 2 - similar qualification, so as to prevent any risk.; OPERATION; Do not cook or fry in a way that creates strong flames. These could be
EN 1 WARNINGS! INSTALLATION • Read the instructions closely before installing and/or using the hood. • The manufacturer will not be held liable for damage caused by installation that is incorrect or not up to standard. • We recommend that all installation and adjustment procedures are carried out by...
Page 3 - by children without supervision; • THE MANUFACTURER DECLINES ALL RESPONSIBILITY IF THE; room through the lateral ventilation grilles of the flue.
EN 2 the dangers it entails. • Children must be supervised to ensure that they do not play with the appliance • ATTENTION : The accessible parts can become very hot if they are used with cooking equipment. MAINTENANCE • Before carrying out any maintenance procedure or cleaning, disconnect the applia...
Page 4 - INSTALLATION INSTRUCTIONS:
EN 3 INSTALLATION INSTRUCTIONS: The hood is supplied with all the accessories necessary for its installation. The minimum distance between the lower surface of the hood and the hob must be at least 650mm for electric hobs (Fig. 1). If the motor inlet is equipped with a non-return valve for fumes, ma...
Page 5 - • ELECTRIC CONNECTION
Fig. 5 Fig. 6 Fig. 7 L2 L1 K Z Z L L Z EN 4 FILTER version: Leave the motor inlet free. Install the active carbon filters as shown on page 8. If the hood is not supplied with an active carbon filter you must buy it separately at your nearest authorised Smeg dealer. For some models there is a standar...
EN 5 USER INSTRUCTIONS • CONTROLS UNIT For an optimal and efficient use of the product it is advisable to start the hood a few minutes before you start cooking and to keep it on for at least 15min after you have finished cooking or until steam and odours have completely disappeared. To start the hoo...
Page 8 - SOFT TOUCH ELECTRONIC PUSHBUTTON BOARD:; TIMED AUTO POWER OFF; above the pressed button flashing.; FILTER CLEANING SIGNAL
Motor OFF key/ Filters reset key Power key/hood speed selection Start timed intensive speed Lights ON/OFF key EN 7 The timed intensive function is that mode of service for which the hood, for a limited time, works at its maximum capacity. Activating the function is displayed by the LED located under...
Page 9 - FUNCTIONS AND MAINTENANCE:; is also available, with the layout shown on the; METAL FILTER CLEANING:; until the carbon reaches; REPLACING CARBON FILTERS:
EN 8 Before performing any maintenance and/or cleaning always disconnect the hood from the power supply Regular cleaning guarantees good operation and a long appliance service life. The grease filters and filter hoods with carbon filters require special care. N.B. The accumulation of grease inside t...