Smart PMWT-660/680 - Manuals

Page 2 - Product Registration; Register online at

Trademark Notice SMART Board, smar ttech and the SMART logo are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. TOR X is a trademark of Tex tron Inc. Phillips is a registered trademark of Phillips Screw Company. NEC is a trademark of NEC Corporation....

Page 3 - Installation Overview

PMWT-660/680 Installation Guide 1 Installation Overview Please read these instructions carefully before you install your projector wall mount. Use this guide to assemble and install the projector wall mount for SMART Board™ interactive whiteboards, which is a projector mount for your SMART Board int...

Page 5 - To remove an existing SMART Board interactive whiteboard

PMWT-660/680 Installation Guide 3 To install the projector wall mount, you must complete the following tasks: 1. Find a suitable location for the projector wall mount (page 4). 2. Install the wall mounting hardware (pages 4 and 5). 3. Assemble and mount the projector support (page 7). 4. Attach the ...

Page 6 - Finding a Suitable Location for the Projector Wall Mount

4 PMWT-660/680 Installation Guide 5. Slide the pen tray off its support brackets, and set it aside in a safe location. 6. Use a No. 2 Phillips screwdriver to remove the two screws that secure the pen tray brackets to the wall. Set the screws aside, as you will reinsert them after you attach the inte...

Page 7 - Installing the Wall Mounting Hardware in Drywall

PMWT-660/680 Installation Guide 5 In the absence of such an outlet, you must route the projector cables through the projector mount and behind the interactive whiteboard, as described on page 16. Installing the Wall Mounting Hardware in Drywall 1. Using the provided template, mark the anchor hole lo...

Page 9 - Assembling and Mounting the Projector Support

PMWT-660/680 Installation Guide 7 Assembling and Mounting the Projector Support Follow these instructions to assemble the projector mount and mount it on the wall. 1. Using the provided 5/32" security hex key, attach each projector bracket to the upper support with a No. 8-32 × 1/2" security...

Page 13 - Attaching the Projector Plate to the Projector

PMWT-660/680 Installation Guide 11 11. Position the combined brackets over the posts on the wall mount, and use three acorn nuts to secure them. Attaching the Projector Plate to the Projector 1. Close and lock the projector’s mirror cover. 2. Turn the projector over. 3. Remove the projector’s feet. ...

Page 14 - Attaching the Projector to the Projector Support

12 PMWT-660/680 Installation Guide 5. Insert the four No. 8-32 × 1" TORX screws through the four small holes in the projector plate, and anchor them in the projector’s matching screw holes by hand until they are snug. Then, using the supplied TR20 TORX security hex key, tighten the screws anothe...

Page 15 - Hanging the Interactive Whiteboard

PMWT-660/680 Installation Guide 13 2. Attach the projector plate to the projector bracket by inserting a No. 8-32 × 1/2" security hex screw through the projector plate’s slot and into the projector bracket’s screw hole. Don’t tighten the screw completely. Insert it only until the threads of the ...

Page 17 - Routing the Projector Cables

PMWT-660/680 Installation Guide 15 9. Slide the pen tray onto its support brackets until the pen tray rests snugly against the bottom of the interactive whiteboard frame. Click the pen tray into place. 10. Route the MOD6 cable through the cable management channel and insert the connector into port 1...

Page 18 - NOTES; Adjusting the Projected Image on the Interactive Whiteboard

16 PMWT-660/680 Installation Guide Finally, route the cables behind the interactive whiteboard. NOTES • The cables supplied with the NEC WT600 or WT610 projector are unlikely to be long enough to reach the power outlet and the computer. You must purchase longer cables if you need them. • Make sure t...

Page 19 - Customer Support; Online Support; Training; Contacting SMART Technical Support

PMWT-660/680 Installation Guide 17 Customer Support Online Support Visit www.smarttech.com/support to view and download user’s guides, “how-to” and troubleshooting articles, software and more. Training Visit www.smarttech.com/trainingcenter for training materials and information about our training s...

Page 22 - SMART Technologies

SMART Technologies 1207 – 11 Avenue SW, Suite 300 Calgary, AB T3C 0M5 CANADA www.smarttech.com/support www.smarttech.com/contactsupport Support +1.403.228.5940 Toll Free 1.866.518.6791 (U.S./Canada) 99-00545-01 REV B0