National Instruments NI TB-2706 - Manuals

NI TB-2706 Installation Guide 2 ni.com ❑ 0.10 in. slotted screwdriver ❑ Pinout label for M Series (adhered to cover of TB-2706) or pinout list for NI PXI-6143 ❑ Number 1 Phillips screwdriver ❑ 26–16 AWG wire ❑ Wire cutters ❑ Wire insulation stripper Safety Information Cautions Do not operate the dev...

© National Instruments Corporation 3 NI TB-2706 Installation Guide Connecting the Signals Refer to Figure 1 as you complete the following steps to connect signals to your terminal block. Figure 1. TB-2706 Parts Locator Diagram 1. Remove the terminal block cover by unscrewing the top cover screw usin...

NI TB-2706 Installation Guide 4 ni.com Figure 2. Pinout Label for M Series Figure 3. Pinout for PXI-6143 2. Loosen or remove the strain-relief bar by loosening the two strain-relief screws with the Phillips-head screwdriver. 3. Use wire cutters and wire insulation strippers to strip no more than 7 m...