National Instruments USB-9221 - Manual
National Instruments USB-9221 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Dimensions
- Page 3 – Safety Guidelines; Specifications; Safety Guidelines for Hazardous Voltages; Assembling the High Voltage Screw Terminal Backshell
- Page 4 – USB Devices Getting Started Guide; Start»All Programs»National Instruments»; Installing the Software; Software; Start»All Programs»National
- Page 5 – Module Installation
- Page 6 – Module Dimensions; LED Indicator; LED State/Device Status; LED State
- Page 7 – Caution
- Page 8 – Module; No connection
- Page 9 – completing the following steps:
- Page 10 – Refer to your software documentation, accessible from; Start»; , for information about; Input Circuitry for One Channel; Input Characteristics
- Page 11 – Operating voltage ranges; DSUB; Accuracy; Error
- Page 12 – INL; Power Requirements
- Page 13 – Physical Characteristics; not
- Page 14 – Safety Standards; Note; Hazardous Locations; Environmental
- Page 15 – Electromagnetic Compatibility; FCC Part 15A above 1 GHz; CE Compliance; certification; in the Certification column.; Calibration
- Page 16 – Where to Go for Support; you have access to everything from
USER GUIDE AND SPECIFICATIONS
USB-9201/9221
8-Channel, 12-Bit Analog Input Devices
This user guide describes how to use the National Instruments
USB-9201/9221 devices and lists the specifications.
Introduction
This user guide describes how to use the National Instruments
USB-9201/9221. In this document, the USB-9201/9221 with screw
terminal and USB-9201/9221 with DSUB are referred to inclusively as the
USB-9201/9221. For information about installing, configuring, and
programming your system, refer to your system documentation.
The USB-9210/9221 data acquisition device provides a USB interface for
eight channels of 12-bit analog inputs with integrated signal conditioning.
The USB-9201/9211 consists of two components: an NI 9201/9221
module and a USB-9162 carrier, as shown in Figure 1.
Figure 1.
USB-9201/9221 Components
NI 9201/9221
USB-9162
USB-9201/9221
Hi-SP
eed USB Carrie
r
NI U
SB-9162
Hi-Speed USB Carrier
NI U
SB-9162
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
USB-9201/9221 User Guide and Specifications 2 ni.com Dimensions Figures 2 and 3 show the USB-9201/9221 device dimensions. Figure 2. USB-9201/9221 Devices in Inches (Millimeters) Figure 3. USB-9201/9221 (DSUB) Devices in Inches (Millimeters) 25.34 mm (0.998 in.) Hi-Speed USB Carrier NI USB-9162 140.2...
© National Instruments Corporation 3 USB-9201/9221 User Guide and Specifications Safety Guidelines Operate the USB-9201/9221 only as described in these operating instructions. Caution Although the NI 9201/9221 might have more stringent certification standards than the USB-9201/9221, when used with t...
USB-9201/9221 User Guide and Specifications 4 ni.com Software Software support for the USB-9201/9221 is provided by NI-DAQmx. The NI-DAQmx CD contains example programs that you can use to get started programming with the USB-9201/9221. Refer to the NI-DAQmx for USB Devices Getting Started Guide that...
