National Instruments 4-Channel, +_ VDC, 16-Bit Simultaneous Sampling Analog Input Devices - Manual
National Instruments 4-Channel, +_ VDC, 16-Bit Simultaneous Sampling Analog Input Devices – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Dimensions
- Page 3 – Safety Guidelines; Safety Guidelines for Hazardous Voltages
- Page 4 – Related Documentation; Start»All Programs»National Instruments»NI-DAQ»; LabVIEW; Start»All Programs»National
- Page 5 – Measurement Studio
- Page 6 – ANSI C without NI Application Software; .NET Languages without NI Application Software
- Page 7 – Device Documentation and Specifications
- Page 8 – Training Courses; Installing the Software; Installing Other Software; Devices
- Page 9 – Start»All Programs»National Instruments»; Installing the NI USB-9215 Series Device
- Page 10 – Mounting the NI USB-9215 Series to a Panel
- Page 11 – LED Indicator; Wiring the NI USB-9215 Series Device; LED State
- Page 12 – Module
- Page 15 – Assembling the High Voltage Screw Terminal Backshell
- Page 16 – NI USB-9215 Series Circuitry
- Page 17 – Input Characteristics; Highest Channel Number
- Page 18 – Error
- Page 19 – Power Requirements; Physical Characteristics
- Page 20 – Safety; NI USB-9215 with Screw Terminal Safety Voltages; NI USB-9215A with BNC Safety Voltages
- Page 21 – Safety Standards; Hazardous Locations; Environmental; Electromagnetic Compatibility
- Page 22 – CE Compliance; Environmental Management; Waste Electrical and Electronic Equipment (WEEE); Calibration; ⬉ᄤֵᙃѻક∵ᵻࠊᄣ⧚ࡲ⊩ ˄Ё; RoHS
- Page 23 – Where to Go for Support
USER GUIDE AND SPECIFICATIONS
NI USB-9215 Series
4-Channel, ±10 VDC, 16-Bit Simultaneous Sampling Analog
Input Devices
This user guide describes how to use the National Instruments USB-9215
Series and lists the specifications. In this document, the NI USB-9215/9215A
with screw terminal or backshell and NI USB-9215A with BNC are referred to
inclusively as the NI USB-9215 Series.
Introduction
The NI USB-9215 Series data acquisition devices provide a USB interface
for four channels of 16-bit simultaneous sampling analog inputs with
integrated signal conditioning. The NI USB-9215 Series consists of
two components: an NI 9215 module and an NI USB-9161/9162 USB
carrier, as shown in Figure 1.
Figure 1.
NI USB-9215 Series Components
NI 9215
NI USB-9161/9162
NI USB-9215 Series
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
NI USB-9215 Series User Guide and Specifications 2 ni.com Dimensions Figures 2 and 3 show the NI USB-9215 Series device dimensions. Figure 2. NI USB-9215 (Screw Terminal) in Millimeters (Inches) Figure 3. NI USB-9215 (BNC) in Millimeters (Inches) Hi-Speed USB Carrier NI USB-9162 140.23 mm (5.521 in....
© National Instruments Corporation 3 NI USB-9215 Series User Guide and Specifications Safety Guidelines Operate the NI USB-9215 Series only as described in these operating instructions. Note Although the NI 9215 module may have more stringent certification standards than the NI USB-9215 Series, when...
NI USB-9215 Series User Guide and Specifications 4 ni.com Related Documentation Each application software package and driver includes information about writing applications for taking measurements and controlling measurement devices. The following references to documents assume you have NI-DAQmx 8.7...
