National Instruments SHC68-H1X38 - Manual
National Instruments SHC68-H1X38 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – What You Need to Get Started
- Page 3 – Parts Locator
- Page 4 – Connecting Signals; Channel
- Page 6 – Using Your Accessory
- Page 7 – Specifications; Physical
USER GUIDE
Digital Flying Lead Cable
Accessory for Single-Ended NI Digital Waveform Generator/Analyzers
The NI SHC68-H1X38 cable is a single-ended cable that breaks out each
NI digital waveform generator/analyzer signal into two 0.1 inch header
receptacles, one receptacle each for the signal and ground. The
NI SHC68-H1X38 cable provides an easy way to connect NI single-ended
high-speed digital waveform generator/analyzer devices to various types of
devices and circuits for interfacing, testing, or analysis.
This cable offers connectivity similar to that found on a typical logic
analyzer, so you can use it in logic analyzer-type applications. Unlike a
typical logic analyzer, however, this cable also allows for simultaneous
pattern generation and acquisition so that it can be used in
stimulus/response applications as well.
This guide explains how to set up and use the NI SHC68-H1X38 cable with
single-ended NI digital waveform generator/analyzer modules.
Contents
What You Need to Get Started ............................................................... 2
Related Documentation ........................................................................... 2
Parts Locator ........................................................................................... 3
Connecting Signals ................................................................................. 4
Using Your Accessory ............................................................................ 6
Specifications .......................................................................................... 7
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Digital Flying Lead Cable User Guide 2 ni.com What You Need to Get Started To set up and use the NI SHC68-H1X38 cable, you need the following items: ❑ Compatible NI digital waveform generator/analyzer, installed in a PXI chassis, compactPCI chassis, or PCI slot ❑ The documentation included with the ...
© National Instruments Corporation 3 Digital Flying Lead Cable User Guide Parts Locator Refer to Figure 1 to locate connectors and components on the NI SHC68-H1X38 cable. The lead pairs are shown in more detail in Figure 2. Figure 1. NI SHC68-H1X38 Cable Parts Locator Diagram 1 Lead Pairs 2 Removabl...
Digital Flying Lead Cable User Guide 4 ni.com Figure 2. Detailed Parts Locator Diagram for the Lead Pairs Connecting Signals Each DIO, PFI, and clock channel of the NI digital waveform generator/analyzer connects to a corresponding pair of leads on the NI SHC68-H1X38 cable. The NI SHC68-H1X38 cable ...
