National Instruments USB-6501 OEM - Manual
National Instruments USB-6501 OEM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Block Diagram; Installing Software; Drivers and Updates; Product Line
- Page 3 – I/O Connector and Cable; Signal
- Page 4 – Static DIO; Signal Name
- Page 5 – Digital I/O Circuitry
- Page 7 – Specifications
- Page 8 – Counter
- Page 9 – Power Requirements; Overvoltage Protection
- Page 10 – Hazardous Locations; Environmental; CE Compliance
- Page 11 – Safety Guidelines
- Page 13 – Where to Go for Support
USER GUIDE
USB-6501 OEM
This user guide describes how to use the National Instruments USB-6501
OEM data acquisition (DAQ) device.
The NI USB-6501 OEM is a full-speed USB 2.0 device that provides
24 DIO channels and a 32-bit counter.
Dimensional Drawings
Figure 1 shows a top view of the USB-6501 OEM. Figure 2 shows the front
and rear dimensions.
Figure 1.
USB-6501 OEM Dimensions (Top View)
2.26 in. (57.4 mm)
1.78 in. (45.2 mm)
1.61 in. (40.8 mm)
1.45 in. (36.7 mm)
1.37 in. (34.7 mm)
0.89 in. (22.7 mm)
0.48 in. (12.2 mm)
–0.18 in. (–4.6 mm)
0.00 in. (0.0 mm)
2.13 in. (54.1 mm)
1.13 in. (28.7 mm)
0.13 in. (3.3 mm)
2.65 in. (67.3 mm)
2.41 in. (61.2 mm)
2.04 in. (51.8 mm)
1.66 in. (42.2 mm)
0.125 in. (3.18 mm) Diameter
0.00 in. (0.0 mm)
0.33 in. (8.3 mm)
–0.03 in. (–0.8 mm)
0.18 in. (4.5 mm)
0.45 in. (11.5 mm)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
USB-6501 OEM User Guide 2 ni.com Figure 2. USB-6501 OEM Dimensions (Front and Rear Views) Block Diagram Figure 3 shows key functional components of the USB-6501 OEM device. Figure 3. Device Block Diagram Refer to the Safety Guidelines section of this document for important safety information. Instal...
© National Instruments Corporation 3 USB-6501 OEM User Guide I/O Connector and Cable Use any 34-pin female IDC (ribbon) cable to connect to the IDC connector on the USB-6501 OEM device. Table 1 lists the pin assignments and signal names for the IDC connector. Table 1. Pin Assignments Signal Pin Conn...
USB-6501 OEM User Guide 4 ni.com Signal Descriptions Table 2 describes the signals available on the I/O connectors. Digital I/O The USB-6501 OEM has 24 single-ended digital lines, P0.<0..7>, P1.<0..7>, and P2.<0..7>, which comprise the three DIO ports. P2.7 can also function as a 3...
