National Instruments NI 9403E Manual

Page 2 - rdsoftwareversion; Caution

NI 9403E Operating Instructions and Specifications 2 ni.com This document describes how to use the National Instruments 9403E and includes dimensions, pin assignments, and specifications for the NI 9403E. Visit ni.com/info and enter rdsoftwareversion to determine which software you need for the modu...

Page 3 - The following figure shows the dimensions of the NI 9403E.

© National Instruments Corp. 3 NI 9403E Operating Instructions and Specifications NI 9403E Dimensions The following figure shows the dimensions of the NI 9403E. Figure 1. NI 9403E Dimensions in Millimeters (Inches) 73.4 (2.89) 0.0 (0.00) 26.7 (1.05) 58.4 (2.30) 66.0 (2.60) 0.0 (0.00)

Page 5 - Specifications

© National Instruments Corp. 5 NI 9403E Operating Instructions and Specifications Each channel has a DIO pin to which you can connect a digital input or output device. The 32 DIO channels are internally referenced to COM, so you can use any of the four COM lines as a reference for the external signa...

Page 6 - Connecting Digital Devices to the NI 9403E

NI 9403E Operating Instructions and Specifications 6 ni.com Refer to Figure 3 for an illustration of several types of digital devices connected to the NI 9403E. Figure 3. Connecting Digital Devices to the NI 9403E TTL Signal +5 V +5 V LED DIO0 as Input DIO1 as Input COM DIO2 as Output NI 9403E Dev 3...

Page 7 - Sleep Mode

© National Instruments Corp. 7 NI 9403E Operating Instructions and Specifications Overcurrent/Short-Circuit Protection The overcurrent protection allows only a specified amount of current through the output channels to protect the NI 9403E from short circuits. If the NI 9403E goes into an overcurren...

Page 8 - and enter; cseriesdoc; for information about; Input/Output Characteristics

NI 9403E Operating Instructions and Specifications 8 ni.com ni.com/info and enter cseriesdoc for information about C Series documentation. Typically, when a system is in sleep mode, you cannot communicate with the modules. In sleep mode, the system consumes minimal power and may dissipate less heat ...

Page 9 - Digital logic levels; to; Output; A max

© National Instruments Corp. 9 NI 9403E Operating Instructions and Specifications Digital logic levels Input Voltage ................................. – 0.25 to 5.25 V High, V IH .............................. 2.2 V min Low, V IL ............................... 0.8 V max Hysteresis, V H ...............

Page 11 - S max

© National Instruments Corp. 11 NI 9403E Operating Instructions and Specifications Update/transfer time 1 cRIO-9151 R SeriesExpansion chassis ................ 8 μ S max All other chassis ................... 7 μ S max Direction change time 1 ............... 18 μ S max Overvoltage protectionChannel-to...

Page 12 - Note; Contact NI for Bellcore MTBF specifications; Power Requirements; Power consumption from chassis

NI 9403E Operating Instructions and Specifications 12 ni.com MTBF ............................................... 763,325 hours at 25 °C; Bellcore Issue 2, Method 1, Case 3, Limited Part Stress Method Note Contact NI for Bellcore MTBF specifications at other temperatures or for MIL-HDBK-217F specifi...

Page 13 - Physical Characteristics; If you need to clean the module, wipe it with a dry towel.; Safety; Safety Voltages; Connect only voltages that are within the following limits.; dielectric withstand test

© National Instruments Corp. 13 NI 9403E Operating Instructions and Specifications Physical Characteristics If you need to clean the module, wipe it with a dry towel. Weight ............................................... 47 g (1.7 oz) Safety Safety Voltages Connect only voltages that are within the...

Page 14 - MAINS; Do; Safety Standards; For UL and other safety certifications, refer to the

NI 9403E Operating Instructions and Specifications 14 ni.com Measurement Category I is for measurements performed on circuits not directly connected to the electrical distribution system referred to as MAINS voltage. MAINS is a hazardous live electrical supply system that powers equipment. This cate...

Page 15 - Online Product Certification; certification; , search by module number or product line, and; Environmental; noncondensing

© National Instruments Corp. 15 NI 9403E Operating Instructions and Specifications Online Product Certification Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for this product, visit ni.com/ certific...

Page 16 - Environmental Management; For additional environmental information, refer to the

NI 9403E Operating Instructions and Specifications 16 ni.com Maximum altitude............................. 2,000 m Pollution Degree (IEC 60664) .......... 2 Environmental Management NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that e...

Page 17 - Waste Electrical and Electronic Equipment (WEEE); EU Customers; At the end of the life cycle, all products; RoHS; Ё೑ᅶ᠋; ヺড়Ё೑⬉ᄤֵᙃ; National Instruments; ড়㾘ᗻֵᙃˈ䇋ⱏᔩ; about China RoHS compliance, go to

© National Instruments Corp. 17 NI 9403E Operating Instructions and Specifications Waste Electrical and Electronic Equipment (WEEE) EU Customers At the end of the life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instrume...

Page 18 - Where to Go for Support; you have access to

NI 9403E Operating Instructions and Specifications 18 ni.com Where to Go for Support The National Instruments Web site is your complete resource for technical support. At ni.com/support you have access to everything from troubleshooting and application development self-help resources to email and ph...