National Instruments NI 9265 - Manuals

NI 9265 Operating Instructions and Specifications 6 ni.com Special Conditions for Hazardous Locations Use in Europe This eq u ipment has been eval u ated as EEx nC IIC T4 eq u ipment u nder DEMKO Certificate No. 03 ATEX 0324020X. Each mod u le is marked II 3G and is s u itable for u se in Zone 2 haz...

© National Instruments Corp. 7 NI 9265 Operating Instructions and Specifications Connecting the NI 9265 The NI 9265 has a 10-terminal, detachable screw-terminal connector that provides connections for 4 analog o u tp u t channels. Figure 2. NI 9265 Terminal Assignments AO0COM0AO1COM1AO2COM2AO3COM3Vs...

NI 9265 Operating Instructions and Specifications 8 ni.com The NI 9265 has fo u r analog o u tp u t channels, AO. Each channel has a common terminal, COM, that is internally connected to the isolated gro u nd reference of the mod u le. The 9265 also has a terminal for an external power s u pply, V s...

© National Instruments Corp. 9 NI 9265 Operating Instructions and Specifications Figure 3. Connecting a Load to the NI 9265 Note Yo u m u st u se 2-wire ferr u les to create a sec u re connection when connecting more than one wire to a single terminal on the NI 9265. AO COM NI 9265 I s olated DAC Ex...

NI 9265 Operating Instructions and Specifications 10 ni.com Yo u m u st connect an external power s u pply to the NI 9265. This power s u pply provides the c u rrent for the devices yo u connect to the mod u le. Connect the positive lead of the power s u pply to the s u pply terminal, V s u p , and ...

© National Instruments Corp. 11 NI 9265 Operating Instructions and Specifications Figure 4. 10-Terminal Detachable Screw-Terminal Connector with Ferrule Sleep Mode This mod u le s u pports a low-power sleep mode. S u pport for sleep mode at the system level depends on the chassis that the mod u le i...

NI 9265 Operating Instructions and Specifications 12 ni.com Visit ni.com/info and enter c s erie s doc for information abo u t C Series doc u mentation. Typically, when a system is in sleep mode, yo u cannot comm u nicate with the mod u les. In sleep mode, the system cons u mes minimal power and may...

© National Instruments Corp. 13 NI 9265 Operating Instructions and Specifications F u ll-scale o u tp u t c u rrent Minim u m .................................... 20.1 mA Typical ........................................ 20.6 mAMaxim u m ................................... 21.0 mA O u tp u t range .....

NI 9265 Operating Instructions and Specifications 14 ni.com Stability Gain drift .................................... 30 ppm/°COffset drift .................................. 45 ppm/°C External power s u pply voltage range (V s u p ) .......................... 9–36 VDC Protection (AO, V s u p ) Over...

© National Instruments Corp. 15 NI 9265 Operating Instructions and Specifications Settling time (to 1 LSB) F u ll-scale step............................. 10 μ s 1 mA step ................................... 5 μ s Glitch energy .................................... Unmeas u rable Monotonicity............

NI 9265 Operating Instructions and Specifications 16 ni.com Thermal dissipation (at 70 °C) Active mode ............................... 1.5 W maxSleep mode ................................. 10 mW max Power cons u mption from external power s u pply Active mode ............................... 1.4 W ma...

© National Instruments Corp. 17 NI 9265 Operating Instructions and Specifications Safety Maximum Voltage 1 Connect only voltages that are within the following limits. Channel-to-COM or V s u p -to-COM ... ±40 V max Isolation Voltages Channel-to-channel ........................... No isolation betwee...

NI 9265 Operating Instructions and Specifications 18 ni.com that provided by a standard wall o u tlet, for example, 115 V for U.S. or 230 V for E u rope. Caution Do not connect the NI 9265 to signals or u se for meas u rements within Meas u rement Categories III or IV. Safety Standards This prod u c...

© National Instruments Corp. 19 NI 9265 Operating Instructions and Specifications Canada (C-UL) ................................. Class I, Division 2, Gro u ps A, B, C, D, T4; Class I, Zone 2, Ex nC IIC T4 E u rope (DEMKO)............................. EEx nC IIC T4 Environmental National Instr u men...

NI 9265 Operating Instructions and Specifications 20 ni.com Storage h u midity (IEC 60068-2-56).............................. 5 to 95% RH, noncondensing Maxim u m altit u de............................. 2,000 m Poll u tion Degree (IEC 60664) .......... 2 Shock and Vibration To meet these specificati...

© National Instruments Corp. 21 NI 9265 Operating Instructions and Specifications Electromagnetic Compatibility This prod u ct is designed to meet the req u irements of the following standards of EMC for electrical eq u ipment for meas u rement, control, and laboratory u se: • EN 61326 EMC req u ire...

NI 9265 Operating Instructions and Specifications 22 ni.com ni.com/certification , search by mod u le n u mber or prod u ct line, and click the appropriate link in the Certification col u mn. Environmental Management National Instr u ments is committed to designing and man u fact u ring prod u cts i...

© National Instruments Corp. 23 NI 9265 Operating Instructions and Specifications Calibration Yo u can obtain the calibration certificate and information abo u t calibration services for the NI 9265 at ni.com/calibration . Calibration interval ........................... 1 year ⬉ᄤֵᙃѻક∵ᶧ᥻ࠊㅵ⧚ࡲ⊩ ˄Ё೑ Ro...

NI 9265 Operating Instructions and Specifications 24 ni.com Where to Go for Support The National Instr u ments Web site is yo u r complete reso u rce for technical s u pport. At ni.com/ s upport yo u have access to everything from tro u bleshooting and application development self-help reso u rces t...