Page 2 - Note; Safety Guidelines
NI 9265 Operating Instructions and Specifications 2 ni.com This doc u ment describes how to u se the National Instr u ments 9265 and incl u des specifications and terminal assignments for the NI 9265. Visit ni.com/info and enter rd s oftwarever s ion to determine which software yo u need for the mod...
Page 3 - Hot Surface; Safety Guidelines for Hazardous Voltages; Caution; Caution; not
© National Instruments Corp. 3 NI 9265 Operating Instructions and Specifications Hot Surface This icon denotes that the component may be hot. To u ching this component may res u lt in bodily inj u ry. Safety Guidelines for Hazardous Voltages If hazardo u s voltages are connected to the mod u le, tak...
Page 4 - Safety Guidelines for Hazardous Locations
NI 9265 Operating Instructions and Specifications 4 ni.com Fig u re 1 shows the NI 9932 connector backshell. Figure 1. NI 9932 Connector Backshell Safety Guidelines for Hazardous Locations The NI 9265 is s u itable for u se in Class I, Division 2, Gro u ps A, B, C, D, T4 hazardo u s locations; Class...
Page 6 - Special Conditions for Hazardous Locations Use in Europe
NI 9265 Operating Instructions and Specifications 6 ni.com Special Conditions for Hazardous Locations Use in Europe This eq u ipment has been eval u ated as EEx nC IIC T4 eq u ipment u nder DEMKO Certificate No. 03 ATEX 0324020X. Each mod u le is marked II 3G and is s u itable for u se in Zone 2 haz...
Page 7 - tp
© National Instruments Corp. 7 NI 9265 Operating Instructions and Specifications Connecting the NI 9265 The NI 9265 has a 10-terminal, detachable screw-terminal connector that provides connections for 4 analog o u tp u t channels. Figure 2. NI 9265 Terminal Assignments AO0COM0AO1COM1AO2COM2AO3COM3Vs...
Page 8 - Specifications
NI 9265 Operating Instructions and Specifications 8 ni.com The NI 9265 has fo u r analog o u tp u t channels, AO. Each channel has a common terminal, COM, that is internally connected to the isolated gro u nd reference of the mod u le. The 9265 also has a terminal for an external power s u pply, V s...
Page 9 - Yo
© National Instruments Corp. 9 NI 9265 Operating Instructions and Specifications Figure 3. Connecting a Load to the NI 9265 Note Yo u m u st u se 2-wire ferr u les to create a sec u re connection when connecting more than one wire to a single terminal on the NI 9265. AO COM NI 9265 I s olated DAC Ex...
Page 10 - Wiring for High-Vibration Applications
NI 9265 Operating Instructions and Specifications 10 ni.com Yo u m u st connect an external power s u pply to the NI 9265. This power s u pply provides the c u rrent for the devices yo u connect to the mod u le. Connect the positive lead of the power s u pply to the s u pply terminal, V s u p , and ...
Page 11 - Sleep Mode
© National Instruments Corp. 11 NI 9265 Operating Instructions and Specifications Figure 4. 10-Terminal Detachable Screw-Terminal Connector with Ferrule Sleep Mode This mod u le s u pports a low-power sleep mode. S u pport for sleep mode at the system level depends on the chassis that the mod u le i...
Page 12 - Output Characteristics
NI 9265 Operating Instructions and Specifications 12 ni.com Visit ni.com/info and enter c s erie s doc for information abo u t C Series doc u mentation. Typically, when a system is in sleep mode, yo u cannot comm u nicate with the mod u les. In sleep mode, the system cons u mes minimal power and may...
Page 13 - Measurement Conditions
© National Instruments Corp. 13 NI 9265 Operating Instructions and Specifications F u ll-scale o u tp u t c u rrent Minim u m .................................... 20.1 mA Typical ........................................ 20.6 mAMaxim u m ................................... 21.0 mA O u tp u t range .....
Page 14 - Stability
NI 9265 Operating Instructions and Specifications 14 ni.com Stability Gain drift .................................... 30 ppm/°COffset drift .................................. 45 ppm/°C External power s u pply voltage range (V s u p ) .......................... 9–36 VDC Protection (AO, V s u p ) Over...
Page 15 - Power Requirements
© National Instruments Corp. 15 NI 9265 Operating Instructions and Specifications Settling time (to 1 LSB) F u ll-scale step............................. 10 μ s 1 mA step ................................... 5 μ s Glitch energy .................................... Unmeas u rable Monotonicity............
Page 16 - Physical Characteristics
NI 9265 Operating Instructions and Specifications 16 ni.com Thermal dissipation (at 70 °C) Active mode ............................... 1.5 W maxSleep mode ................................. 10 mW max Power cons u mption from external power s u pply Active mode ............................... 1.4 W ma...
Page 17 - Safety; Maximum Voltage
© National Instruments Corp. 17 NI 9265 Operating Instructions and Specifications Safety Maximum Voltage 1 Connect only voltages that are within the following limits. Channel-to-COM or V s u p -to-COM ... ±40 V max Isolation Voltages Channel-to-channel ........................... No isolation betwee...
Page 18 - Safety Standards; Hazardous Locations
NI 9265 Operating Instructions and Specifications 18 ni.com that provided by a standard wall o u tlet, for example, 115 V for U.S. or 230 V for E u rope. Caution Do not connect the NI 9265 to signals or u se for meas u rements within Meas u rement Categories III or IV. Safety Standards This prod u c...
Page 19 - Environmental
© National Instruments Corp. 19 NI 9265 Operating Instructions and Specifications Canada (C-UL) ................................. Class I, Division 2, Gro u ps A, B, C, D, T4; Class I, Zone 2, Ex nC IIC T4 E u rope (DEMKO)............................. EEx nC IIC T4 Environmental National Instr u men...
Page 20 - Shock and Vibration
NI 9265 Operating Instructions and Specifications 20 ni.com Storage h u midity (IEC 60068-2-56).............................. 5 to 95% RH, noncondensing Maxim u m altit u de............................. 2,000 m Poll u tion Degree (IEC 60664) .......... 2 Shock and Vibration To meet these specificati...
Page 21 - Electromagnetic Compatibility; CE Compliance
© National Instruments Corp. 21 NI 9265 Operating Instructions and Specifications Electromagnetic Compatibility This prod u ct is designed to meet the req u irements of the following standards of EMC for electrical eq u ipment for meas u rement, control, and laboratory u se: • EN 61326 EMC req u ire...
Page 22 - Environmental Management; NI and the; Waste Electrical and Electronic Equipment (WEEE); EU Customers; must
NI 9265 Operating Instructions and Specifications 22 ni.com ni.com/certification , search by mod u le n u mber or prod u ct line, and click the appropriate link in the Certification col u mn. Environmental Management National Instr u ments is committed to designing and man u fact u ring prod u cts i...
Page 23 - Calibration; RoHS; National Instruments; about China RoHS compliance, go to
© National Instruments Corp. 23 NI 9265 Operating Instructions and Specifications Calibration Yo u can obtain the calibration certificate and information abo u t calibration services for the NI 9265 at ni.com/calibration . Calibration interval ........................... 1 year ⬉ᄤֵᙃѻક∵ᶧࠊㅵ⧚ࡲ⊩ ˄Ё Ro...
Page 24 - Where to Go for Support
NI 9265 Operating Instructions and Specifications 24 ni.com Where to Go for Support The National Instr u ments Web site is yo u r complete reso u rce for technical s u pport. At ni.com/ s upport yo u have access to everything from tro u bleshooting and application development self-help reso u rces t...
