National Instruments FP-3000 - Manuals

National Instruments FP-3000 – Manual in PDF format online.

Manuals:

Manual National Instruments FP-3000

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - Installation; Caution; To avoid damaging the FP-3000 and the terminal; DIN Rail Clip; Mount the FP-3000 onto a 35 mm DIN rail or onto a panel; Mounting the FP-3000 onto a DIN Rail

FP-3000 2 www.natinst.com Installation Caution To avoid damaging the FP-3000 and the terminal bases, make sure that power is not applied to the FP-3000 while you install or remove terminal bases. Follow these steps to install the FP-3000: 1. Use a flat-bladed screwdriver to open the DIN rail clip to...

Page 3 - b. Slide the FP-3000 to the desired position along the; Mounting the FP-3000 onto a Panel Mount Accessory; Add terminal bases with their local bus connectors firmly

© National Instruments Corp. 3 FP-3000 b. Slide the FP-3000 to the desired position along the DIN rail. c. Lock the rail clip. • Installing onto a panel mount accessory, which you can order separately from National Instruments: a. Snap the panel mount accessory onto the module as shown in Figure 3. ...

Page 4 - Network Module and Terminal Base Mounted on a DIN Rail; Network Connection; Dsub Connector Pinout

FP-3000 4 www.natinst.com Figure 4. Network Module and Terminal Base Mounted on a DIN Rail Network Connection Connect the FP-3000 to a Fieldbus network using the 9-position DSub connector on the FP-3000. The pinout of the DSub connector is shown in Figure 5. Figure 5. Dsub Connector Pinout Protectiv...

National Instruments Manuals