National Instruments FP-3000 - Manual
National Instruments FP-3000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation; Caution; To avoid damaging the FP-3000 and the terminal; DIN Rail Clip; Mount the FP-3000 onto a 35 mm DIN rail or onto a panel; Mounting the FP-3000 onto a DIN Rail
- Page 3 – b. Slide the FP-3000 to the desired position along the; Mounting the FP-3000 onto a Panel Mount Accessory; Add terminal bases with their local bus connectors firmly
- Page 4 – Network Module and Terminal Base Mounted on a DIN Rail; Network Connection; Dsub Connector Pinout
- Page 5 – Connect the FP-3000 to the terminal base before; FP-3000 Power Connector Pinout; Specifications; c c
- Page 6 – consumption; CE Mark Compliance; EMC directive; Mechanical Dimensions
FieldPoint
™
is a trademark of National Instruments Corporation. Product and company names
mentioned herein are trademarks or trade names of their respective companies.
322170B-01
©
Copyright 1999 National Instruments Corp. All rights reserved.
June 1999
OPERATING INSTRUCTIONS
FP-3000
FieldPoint Fieldbus Network Module
This document provides a quick guide to install and configure the
FP-3000 network module. For more detailed information on using
the network module, refer to the FP-3000 user manual.
Features
•
FOUNDATION Fieldbus H1 interface to control network
•
Runs on 11 to 30 VDC power
•
Built-in high efficiency power supply powers I/O modules
•
– 40 to +60 °C operation
Kit Contents and Optional Equipment
Your kit contains the following items:
•
FP-3000 network module
•
Accessories: protective connector cover, two DIN rail stops,
Device Description diskette
You can order the following optional equipment from National
Instruments:
•
Panel mount accessory, part number 777609-01
•
Terminal bases and I/O modules, complete list of terminal
bases and I/O modules in the National Instruments online
catalog at
www.natinst.com
•
Cables
•
24 VDC power supply
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
FP-3000 2 www.natinst.com Installation Caution To avoid damaging the FP-3000 and the terminal bases, make sure that power is not applied to the FP-3000 while you install or remove terminal bases. Follow these steps to install the FP-3000: 1. Use a flat-bladed screwdriver to open the DIN rail clip to...
© National Instruments Corp. 3 FP-3000 b. Slide the FP-3000 to the desired position along the DIN rail. c. Lock the rail clip. • Installing onto a panel mount accessory, which you can order separately from National Instruments: a. Snap the panel mount accessory onto the module as shown in Figure 3. ...
FP-3000 4 www.natinst.com Figure 4. Network Module and Terminal Base Mounted on a DIN Rail Network Connection Connect the FP-3000 to a Fieldbus network using the 9-position DSub connector on the FP-3000. The pinout of the DSub connector is shown in Figure 5. Figure 5. Dsub Connector Pinout Protectiv...
