Miele 9983700 - Manuals

This vacuum cleaner complies with statutory safety requirements.Improper use can, however, lead to personal injury and damageto property. To avoid the risk of accidents and damage to the vacuumcleaner, please read these instructions carefully before using itfor the first time. They contain important...

~ Repairs should only be undertaken by a service technician authorised by Miele. Repairs and other work by unqualified personscould be dangerous. Miele cannot be held liable for unauthorisedwork. ~ Caution: The vacuum cleaner handle, hose and ElectroBrush contain electrical connections. The handle, ...

~ Do not vacuum up any inflammable or combustible liquids or gases and do not vacuum in areas where such substances arestored. Accessories ~ It is not advisable to vacuum directly with the handle, i.e. without an accessory attached, as the rim could get damaged and youcould hurt yourself on sharp ed...

Attaching the electro suctionhose ^ Insert the hose connector into thesocket until it clicks into position. Todo this, line up the guides on the twopieces. Removing the electro suctionhose ^ Press the release buttons at the sideof the hose connector, and lift thehose from the socket. Connecting the ...

Using the ElectroBrush It is important to observe the flooringmanufacturer’s cleaning and careinstructions. Depending on the model, your vaccumcleaner is fitted with one of the followingElectroBrushes. – ElectroBrush SEB 217– ElectroBrush SEB 236 The ElectroBrush is particularly suitablefor intensiv...

Using the standard floorhead It is important to observe the flooringmanufacturer’s cleaning and careinstructions. This floorhead can be used for allnormal cleaning of carpets, rugs androbust hard flooring. Miele offer a range of other floorheads,brushes and accessories for othertypes of flooring and...

a Crevice nozzle For cleaning in folds, crevices andcorners. b Dusting brush For cleaning skirting boards, ornate,carved or delicate articles, etc.The head of the dusting brush canbe swivelled to attain the bestcleaning position. c Upholstery nozzle For cleaning upholstery, mattresses,cushions, curt...

Mains cable Unwinding the cable ^ Pull out the connection cable to therequired length (max. cable lengthapprox. 7.5 m). ^ Plug the connection cable into a wallsocket and switch on at the wall. , If vacuuming for longer than 30 minutes, the connection cable mustbe pulled out to its fullest extent.Oth...

Selecting the suction power The suction power can be regulated tosuit the type of flooring. Reducing thesuction power reduces the amount ofeffort required to manoeuvre thefloorhead. The symbols on the comfort handleindicate the type of use for which thesettings are suitable.The setting lights up yel...

Vacuuming ^ When vacuuming, pull the cleanerbehind you on its wheels. You canstand it upright for vacuuming stairsand curtains etc. , When vacuuming especially fine dust, electrostatic charges build upnaturally. Under certain conditionsthese charges will be released. Toavoid the unpleasant effects o...

Switching the ElectroBrush onand off If you want to use the ElectroBrush, youneed to switch this on in addition to thevacuum cleaner. ^ Press the On/Off button j on the comfort handle. The LED on the handle will light up. This means that you can switch theElectroBrush off during vacuuming andthe vac...

ParkSystem for pauses invacuuming (cannot be used with the SEB 236ElectroBrush) A parking system has been designedfor conveniently parking the vacuumcleaner during pauses. ^ Slot the floorhead into the parkingattachment at the back of thevacuum cleaner. If the vacuum cleaner is parked on asloped sur...

ParkSystem for storage , It is important to switch off the vacuum cleaner after each use.Switch off at the wall socket andremove the plug. ^ Stand the vacuum cleaner uprightwhen it is not being used and duringstorage. It is also helpful to retract thetelescopic wand fully. ^ Slot the floorhead downw...

, Always disconnect the vacuum cleaner from the electrical supply formaintenance work and for cleaning.Switch off at the wall socket andremove the plug. The Miele filter system consists of threefilters. – Dustbag – Dust compartment filter (for motor protection) – Exhaust filter These will need to be...

When to change the dustbag Change the dustbag when the colourmarker in the dustbag change indicatorfills the display, or sooner if it is nolonger effective (see possible reasonsfor this below). Miele dustbags are disposable.Dispose of full dustbags.Do not continue to use them oncethey are full as bl...

Replacing the dustbag ^ Press the release button for the dustcompartment lid and raise the lid asfar as it will go. The dustbag has a closing flap whichcloses automatically when the dustcompartment lid is raised to preventany dust escaping. ^ Pull the dustbag out by the grip nextto the self-closing ...

When to change the dustcompartment filter (for motorprotection) Replace this filter every time you start anew packet of dustbags. A dustcompartment filter is supplied withevery packet of Miele dustbags. Correctly changing the dustcompartment filter ^ Open the dust compartment lid. ^ Pull the dustbag...

When to change the threadlifters The thread lifters on the suction inlet tothe floorhead can be replaced.Check them from time to time andreplace them if the pile has worn down. Correctly replacing the threadlifters ^ Use a suitable screwdriver to removethem from the slots. There are twonotches for t...

, Always disconnect the vacuum cleaner from the electricity supplyfor maintenance work and forcleaning. Switch off at the wallsocket and remove the plug. Vacuum cleaner and accessories External surfaces of the vacuumcleaner and of the accessories can becleaned with a dry or a slightly dampcloth, or ...

The vacuum cleaner switches offautomatically, and the overheatingwarning light § comes on. A temperature limiter switch switchesthe vacuum cleaner off automatically ifit gets too hot. The overheating warninglight § will then come on to indicate that it has overheated. This can occur if, for instance...

Certain models are supplied asstandard with one or more of thefollowing accessories. It is important to observe the flooringmanufacturer’s cleaning and careinstructions. The following products and more canbe ordered via the internet (dependingon country) at: They can also be purchased fromMiele. Ele...

Other accessories MicroSet (SMC 20) This set is specially designed forcleaning small objects and difficult toreach areas (such as PC keyboards,stereo equipment, intricately carvedfurniture and ornaments, scale modelsetc). Compact TurboBrush (STB 20) Intended for vacuuming upholstery,mattresses, car ...

All work should be carried out by asuitably qualified and competentperson in strict accordance withnational and local safety regulations. The voltage and rated load are givenon the data plate located underneaththe vacuum cleaner. Please ensure thatthese match the household mainssupply. The fuse rati...