Metra 95-8223 - Manuals

Metra 95-8223 – Manual in PDF format online.

Manuals:

Manual Metra 95-8223

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - TABLE OF CONTENTS; NOWLEDGE IS

Dash Disassembly - Toyota Corolla 2009-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - Double DIN/Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . 2 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 4 - DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION; Continue to final assembly

95-8223 KIT ASSEMBLY 2 A B DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION Attach the factory mounting bracketsand the Double DIN trim plates to theDouble DIN or the stacked ISO mountunit(s) using the screws supplied withthe unit(s). (Figure B) 2 Attach the clips removed from the factory radio to the b...

Page 5 - FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE

95-8223 FINAL ASSEMBLY FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape A B C D Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the ends of an...

Metra Manuals