Metra 95-5817 - Manual
Metra 95-5817 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 3 – ALL VEHICLES
- Page 4 – DOUBLE DIN/STACKED ISO MOUNT; trim the sub dash to gain suitable depth and height.
- Page 5 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS; need to trim the sub dash to gain suitable depth and height.
- Page 6 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 95-5817
95-5817
KIT FEATURES
• A)
Double Din Trim Brackets • B) Filler Bar
KIT COMPONENTS
Dremel or Suitable Cutting Tool
•
Small Flat Blade Screwdriver
• Panel Removal Tool • Socket Wrench
•
Metra 86-5618 Removal Keys
1-800-221-0932
© COPYRIGHT 2009-10 METRA ELECTRONICS CORPORATION
www.metraonline.com
A
APPLICATIONS
• Double DIN Unit Provision
• Stacked ISO Mounts Units Provision
NOTE:
Sub dash modifications are
necessary to use this dash kit.
You will need to trim the sub dash
to gain suitable depth and height.
NOTE:
Once the kit is snapped in, it cannot be
removed without dash panel removal.
B
TOOLS REQUIRED:
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• See www.metraonline.com for specific interface
applications
Antenna Adapter: Not required.
FORD
Explorer 1995-2001
Explorer Sport Trac 2001-2005
Ranger 1995-2009
Crown Victoria 1995-2009
Econoline 1997-2008
Escape 2001-2007
Windstar 1999-2003
Excursion 2000-2005
Super Duty 1999-2004
LINCOLN
Continental 1995-1997
Mark VIII 1996-1998
Town Car 1995-2002
MAZDA
B-Series Pickup 1995-2009
MERCURY
Grand Marquis 1995-2009
Marauder 2003-2004
Mountaineer 1997-2001
Mariner 2005-2007
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - All Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - Double DIN/Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . 2 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
95-5817 DASH DISASSEMBLY 1 1 Using the Metra 86-5618 removal keys, slide the radio out of the radio cavity.Unplug and remove the radio. ( Figure A) Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Cut and remove obstructions in dash cavity. (Be careful not to cut in...
95-5817 KIT/FINAL ASSEMBLY 2 DOUBLE DIN/STACKED ISO MOUNT UNIT(S) PROVISION Attach the double DIN brackets tothe double DIN or stacked ISO Mountunit(s) using the screws suppliedwith the unit(s). (Figure A) 1 * Note: Refer also to the instructions included with the aftermarket radio. A B NOTE: Sub da...
