Metra 99-8205 - Manual
Metra 99-8205 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 3 – DASH DISASSEMBLY
- Page 4 – KIT ASSEMBLY; Two; DIN HEAD UNIT PROVISION
- Page 6 – ISO DIN HEAD UNIT PROVISION
- Page 8 – DOUBLE DIN HEAD UNIT PROVISION
- Page 9 – STACKED ISO DIN HEAD UNIT PROVISION
- Page 10 – FINAL ASSEMBLY; Twist ends together; METRA / EIA WIRING CODE
- Page 11 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-8205
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-08 METRA ELECTRONICS CORPORATION
KIT FEATURES
• DIN head unit provision
• ISO DIN head unit provision
• DDIN head unit provision
- Excluding 2005-2008 Matrix
• Stacked ISO DIN head unit provision
- Excluding 2005-2008 Matrix
A) DDIN Faceplate (excluding 2005-2008 matrix) • B) ISO DIN Faceplate (excluding 2005-2008 matrix)
• C) ISO DIN Faceplate 2005-2008 Matrix D) Pocket • E) Mounting Brackets • F) ISO Trim Plate • G) ISO Brackets
KIT COMPONENTS
TOOLS REQUIRED:
99-8205
A
APPLICATIONS
Toyota Matrix 2003-2008
Pontiac Vibe 2003-2008
Cutting Tool • Phillips Screwdriver • Socket Wrench
B
C
D
E
F
G
H
I
J
K
• H) ISO Spacers • I) Rear Support • J) (4) #6x1/4” Phillip Screws • K) (4) #8x3/8” Phillip Screws
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TABLE OF CONTENTS 99-8205 Dash Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,2 Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4, 5, 6, 7,8 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9...
99-8205 1 Disconnect the negative battery terminal to prevent an accidentalshort circuit. 1 Unclip the bottom edge of the radiotrim panel then lift up and out toremove. (Figure A) 2 TOYOTA MATRIX 2003-2008 PONTIAC VIBE 2003-2008 Remove (4) 10 MM bolts securingthe factory radio. (Figure B) 3 DASH DIS...
99-8205 KIT ASSEMBLY 2 Attach the pocket to the back of theISO/DIN Faceplate (by holding thefaceplate upside down and insertingthe right edge of the pocket intoplace then pushing the rest of thepocket onto the lip) and mount with(2) #8X3/8” Phillips screws. (Figure A) 2 3 A Secure the mounting brack...
