Metra 99-7875T - Manual
Metra 99-7875T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Continue on page 2
- Page 4 – Continue to kit preparation
- Page 5 – Continue to kit assembly
- Page 6 – DIN MOUNT RADIO PROVISION WITH POCKET; Snap the pocket into the radio housing.
- Page 7 – ISO MOUNT RADIO PROVISION WITH POCKET; Continue to final assembly
- Page 8 – DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION
- Page 9 – FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE
- Page 10 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-7875/99-7875T
99-7875/99-7875T
APPLICATIONS
Honda Accord 2008-2010
(For Non-Navigation models with Dual Zone Climate controls)
Honda Accord Crosstour 2010
KIT FEATURES
• Painted To Match Factory Dash
99-7875=Charcoal, 99-7875T=Taupe
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
1-800-221-0932
© COPYRIGHT 2008-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
A
D
C
B
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Cutting Tool
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1729 - Honda harness 2008-up
• 70-1730 - Honda amp interface harness 2008-up
Antenna Adapter:
• 40-HD10 - Honda antenna adapter 2005-up
E
F
TOOLS REQUIRED:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
99-7875/99-7875T DASH DISASSEMBLY HONDA ACCORD 2008-10 / CROSSTOUR 2010 1 1 Unclip and remove the trim panel atthe left side of the factory radio.( Figure B) Disconnect the negative battery ter-minal to prevent an accidental shortcircuit. 3 Unclip and remove the trim panelfrom above the glove box at...
99-7875/99-7875T DASH DISASSEMBLY 2 Remove (2) Phillips screws facing upon the bottom of the factory radio.( Figure H) 9 Unclip and remove the hazardswitch/passenger air bag lightassembly. (Retain the hazardswitch/passenger air bag lightassembly for re-use during kit prepa-ration.) 13 Remove (4) Phi...
99-7875/99-7875T KIT PREPARATION PAS SENGER AIRBA G 3 1 Secure the climate controls into theradio housing using the factory hard-ware from rear. ( Figure C) Snap the hazard switch/passenger airbag light assembly into the radiohousing from front. ( Figure A) 3 Secure the a/c vents into the radiohousi...
