Metra 99-7511S - Manual
Metra 99-7511S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 3 – Continue to kit preparation
- Page 4 – DIN RADIO PROVISION; Continue to final assembly
- Page 5 – ISO MOUNT RADIO PROVISION
- Page 6 – DOUBLE DIN/STACKED ISO MOUNT
- Page 7 – FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE; When a Black wire is not present, ground radio to vehicle chassis.
INSTALLATION INSTRUCTIONS FOR PART 99-7511S
99-7511S
APPLICATIONS
Mazda 6 2009
KIT FEATURES
• DIN Radio Provision
• ISO Mount Radio Provision
• Double DIN Radio Provision
• Stacked ISO Mount Radio Provision
• Painted To Match Silver Factory Dash
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket • G) Filler Trim Panel • H) (2) #3 3/8” Phillips Screws
KIT COMPONENTS
A
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
1-800-221-0932
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
D
E
G
C
TOOLS REQUIRED:
F
H
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Mazda 6 2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - ISO Mount Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . ....
99-7511S DASH DISASSEMBLY MAZDA 6 2009 A B C D 1 1 Unclip and remove the trim panelabove the glove box and down theright side of the center console.( Figure B) Disconnect the negative battery terminal to prevent an accidentalshort circuit. 3 Unclip and remove the cupholder/parking brake trim panel.(...
99-7511S KIT ASSEMBLY 2 REAR OF RADIO HOUSING FILLER TRIM PANEL A B C D DIN RADIO PROVISION Slide the DIN cage into the RadioHousing and secure by bending themetal locking tabs outward. (Figure B) 2 Attach the filler trim panel to the backof the radio housing at the bottomedge. (Figure A) 1 Slide th...
