Metra 99-7866 - Manual
Metra 99-7866 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 3 – Continue to kit preparation
- Page 4 – DISPLAY UNIT ASSEMBLY; Continue to kit assembly
- Page 5 – DIN MOUNT RADIO PROVISION WITH POCKET; Continue to final assembly
- Page 6 – ISO MOUNT RADIO PROVISION WITH POCKET
- Page 7 – FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE; When a Black wire is not present, ground radio to vehicle chassis.
INSTALLATION INSTRUCTIONS FOR PART 99-7866
99-7866
APPLICATIONS
ACURA MDX 2001-2006
KIT FEATURES
• DIN Mount Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Bracket Supports For Display
KIT COMPONENTS
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
1-800-221-0932
© COPYRIGHT 2003-2008 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
D
C
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - ACURA MDX 2001-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Preparation - Display Unit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Kit Assembly - DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . ....
99-7866 DASH DISASSEMBLY ACURA MDX 2001-2006 A B 1 1 Remove (6) mounting screws andremove the audio/display unit fromthe dash. ( Figure B) Disconnect the negative battery ter-minal to prevent an accidental shortcircuit. 3 Remove (8) screws from the audiounit and (6) screws from the displayunit and r...
99-7866 KIT PREPARATION 2 A B DISPLAY UNIT ASSEMBLY Using the mounting screws from thedisplay unit, attach the brackets supplied with the kit by aligning theguide pins on the display with theholes on the bracket. (Figure A) 1 Align guide pins on bottom of displayunit with holes on top of housing and...
