Metra 95-8223 - Manual

Metra 95-8223

Metra 95-8223 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
  • Page 4 – DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION; Continue to final assembly
  • Page 5 – FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE
  • Page 6 – NOTES
Loading the manual

INSTALLATION INSTRUCTIONS FOR PART 95-8223

APPLICATIONS

Toyota Corolla

2009

-10

KIT FEATURES

• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• Painted To Match Factory Dash

95-8223= BLACK
95-8223S= SILVER

• A) Radio Housing Trim Plate • B) Double Din Trim Plate

Harness & Antenna Connections (sold separately)

• 70-1761 Toyota Harness 87-up

• TYTO-01 Toyota Amp Interface 03-up

KIT COMPONENTS

B

TOOLS REQUIRED:

Small Flat Blade Screwdriver/ Panel Removal Tool

• Phillips Screwdriver

1-800-221-0932

© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION

www.metraonline.com

A

95-8223/
95-8223S

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; NOWLEDGE IS

Dash Disassembly - Toyota Corolla 2009-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - Double DIN/Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . 2 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 4 - DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION; Continue to final assembly

95-8223 KIT ASSEMBLY 2 A B DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION Attach the factory mounting bracketsand the Double DIN trim plates to theDouble DIN or the stacked ISO mountunit(s) using the screws supplied withthe unit(s). (Figure B) 2 Attach the clips removed from the factory radio to the b...

Page 5 - FINAL ASSEMBLY; B) Twist ends together; FINAL WIRING CONNECTIONS; METRA / EIA WIRING CODE

95-8223 FINAL ASSEMBLY FINAL ASSEMBLY (A) Strip wire ends back 1/2" B) Twist ends together C) Solder D) Tape A B C D Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individ-ually tape off the ends of an...

Other Metra Models

All Metra Other