Metra 99-3306 - Manual
Metra 99-3306 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 4 – DIN MOUNT RADIO PROVISION WITH POCKET
- Page 5 – ISO MOUNT RADIO PROVISION WITH POCKET
- Page 6 – DOUBLE DIN MOUNT RADIO PROVISION
- Page 7 – STACKED ISO UNITS PROVISION
- Page 8 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
INSTALLATION INSTRUCTIONS FOR PART 99-3306
99-3306
APPLICATIONS
Chevrolet Aveo sedan 2007-2010
KIT FEATURES
• DIN Mount Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Mount Radio Provision
• Stacked ISO Units Provision
A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
KIT COMPONENTS
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
1-800-221-0932
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
D
E
C
F
Pontiac G3 2007-2009
WIRING AND ANTENNA CONNECTIONS: (Sold Separately)
Wiring Harness:
• 70-2105 - GM harness 2006-up
• 70-8405 - GM/Suzuki/Daewoo harness 1999-up
Antenna Adapter:
• 40-CR10 - CHRYSLER/GM antenna adapter 2002-up
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Chevrolet Aveo 2007-2010.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - Pontiac G3 2007-2009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . . 2 - ISO Mo...
99-3306 KIT ASSEMBLY 2 A B C DIN MOUNT RADIO PROVISION WITH POCKET Slide the DIN cage into the RadioHousing and secure by bending themetal locking outward. (Figure A) 1 Slide the aftermarket radio into the DINcage until it snaps into place. (Figure B) 2 Snap the pocket into the radio housing. (Figur...
99-3306 KIT ASSEMBLY 3 A B C ISO MOUNT RADIO PROVISION WITH POCKET Mount the ISO Brackets to the radiousing the screws supplied with theradio. (Figure A) 1 Slide the radio into the radio openinguntil it snaps into place. (Figure B) 2 Snap the ISO Trim Plate onto the frontof the Radio Housing. (Figur...
