Makita HR2470T - Manuals - manualsarea.com

Page 2 - SPECIFICATIONS; Symbols; Read instruction manual.; Intended use; Sound pressure level (L; Wear ear protection

2 ENGLISH (Original instructions) SPECIFICATIONS Model HR2470/HR2470F HR2470T/HR2470FT Tungsten-carbide tipped bit 24 mm Core bit 54 mm Concrete Diamond core bit (dry type) 65 mm Steel 13 mm Capacities Wood 32 mm No load speed (min -1 ) 0 - 1,100 Blows per minute 0 - 4,500 Overall length 370 mm 394 ...

Page 3 - EC Declaration of Conformity

3 • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time)...

Page 5 - supplier safety data.; SAVE THESE INSTRUCTIONS.; Switch action; position (A side) for clockwise rotation or; Removing the quick change chuck for SDS-plus; line

5 supplier safety data. SAVE THESE INSTRUCTIONS. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious perso...

Page 6 - Attaching the quick change drill chuck; symbol. Grasp the change cover of the quick change; Selecting the action mode; Rotation with hammering; symbol. Use a twist drill bit or wood bit.; Hammering only; Torque limiter; ASSEMBLY; changing knob

6 CAUTION: • Before removing the quick change chuck for SDS-plus, always remove the bit. Grasp the change cover of the quick change chuck for SDS-plus and turn in the direction of the arrow until the change cover line moves from the symbol to the symbol. Pull forcefully in the direction of the arrow...

Page 7 - symbol. Turn the bit; Depth gauge

7 Side grip (auxiliary handle) 1 2 3 4 5 6 007949 CAUTION: • Always use the side grip to ensure operating safety. Install the side grip so that the teeth on the grip fit in between the protrusions on the tool barrel. Then tighten the grip by turning clockwise at the desired position. It may be swung...

Page 8 - Dust cup; OPERATION; Hammer drilling operation; and normal drilling may be resumed.

8 The depth gauge is convenient for drilling holes of uniform depth. Loosen the side grip and insert the depth gauge into the hole in the side grip. Adjust the depth gauge to the desired depth and tighten the side grip. NOTE: • The depth gauge cannot be used at the position where the depth gauge str...

Page 9 - MAINTENANCE

9 Drilling in wood or metal 1 2 004223 1 2 3 007944 1 2 3 4 007945 1 2 3 004224 For Model HR2470/HR2470F Use the optional drill chuck assembly. When installing it, refer to "Installing or removing the bit" described on the previous page. For model HR2470T/HR2470FT Use the quick change drill ...

Page 10 - ACCESSORIES

10 ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assis...