Honeywell RTH6580WF1001 - Manuals

6 M33856 PULL HERE TO REMOVE PULL HERE TO REMOVE Finger holds Wallplate (back view) Thermostat 1.5 Separate Wi-Fi thermostat and its wallplate On your new thermostat, grasp the finger holds on the top and bottom of the wallplate with one hand and the thermostat (front) with the other hand. Pull piec...

7 Wallplate 1.6 Mount wallplate for Wi-Fi thermostat Mount your new wallplate using screws and anchors included with the thermostat. If necessary: • Drill 3/16-in holes for drywall • Drill 7/32-in holes for plaster Note : You may be able to use your existing wall anchors. Hold the wallplate up to th...

8 W2 G W Y R RC K Y2 C MCR33878 Y HEAT PUMP CONVENTIONAL AUX/E G O/B Y R RC K L C C G W R 1.7 Connect wires 1.7a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. Important! C wire is required and is the primary power source. Without a C wire, your thermostat will no...

10 Circuit breaker box Heating/cooling system power switch 1.10 Switch heating/cooling system ON Important! 1.10a Verify that the C wire is connected at the thermostat and at the heating/cooling system. 1.10b Make sure the heating/cooling system door is firmly secured. 1.10c Switch power back ON for...

11 1.11 Set date and time 1.11a Press s or t to set clock. 1.11b Press Set Day . 1.11c Press s or t to select the day of week. 1.11d Press Done to save. (Press and hold a st button to quickly change a setting.) MCR33908 HOLD MCR33909 HOLD

12 1.12 Determine your heating/cooling system type Important! Heating/cooling system type must be set so that your thermostat operates properly and does not damage your system. 1.12a If you have a traditional system (natural gas forced air with A/C), your thermostat is set up by default to control t...

13 1.13 Test your thermostat Congratulations! Your thermostat is operational. 1.13a Press the System button to change to heating or cooling and begin operation. Heating/cooling system not turning on? Refer to User Guide or FAQ at wifithermostat.com/support 1.13b For remote access to your thermostat,...

14 If you get stuck... At any point in this process, restart the thermostat by removing the thermostat from the wallplate, wait for 10 seconds, and snap it back into place. Return to 2.1 . Need more help? Find additional information in the User Guide. Getting Help Connect to your Wi-Fi network 2 2.1...

15 2.1b Make sure the thermostat displays Wi-Fi Setup . 2.1c On the wireless device (laptop, tablet, smartphone), view the list of available Wi-Fi networks. 2.1d Connect to the network called NewThermostat_123456 (the number will vary). Note : If you are asked to specify a home, public, or office ne...

16 2.2 Join your home network 2.2a Open your web browser to access the Thermostat Wi-Fi Setup page. The browser should automatically direct you to the correct page; if it does not, go to http://192.168.1.1 2.2b Find the name of your home network on this page and select it. Note : Some routers have e...

17 2.3 Make sure your thermostat is connected While the connection is in process, your thermostat will flash Wait for up to 3 minutes. When the connection is complete, the display will show Wi-Fi Setup Connection Success . The Wi-Fi signal strength will appear in the top-right corner. After about 60...

18 Register online for remote access 3 To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Follow the instructions below. View the Wi-Fi Thermostat Registration video at wifithermostat.com/videos 3.1 Open the Total Connect Comfort web site Go to www.mytotal...

19 3.2 Login or create an account If you have an account, click Login – or – click Create An Account . 3.2a Follow the instructions on the screen. 3.2b Check your email for a response from My Total Connect Comfort. This may take several minutes. Note : If you do not receive a response, check your ju...

22 3.3c Also notice that your thermostat displays its signal strength. Congratulations! You’re done. You can now control your thermostat from anywhere through your tablet, laptop, or smartphone. Total Connect Comfort free app is available for Apple ® iPhone ® , iPad ® and iPod touch ® devices at iTu...

23 MERCURY NOTICE : Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or 1-800-238-8192 for information on how and where to properly and safely dispose of your old thermostat. NOTICE : To ...

Automation and Control Solutions Honeywell International Inc. 1985 Douglas Drive NorthGolden Valley, MN 55422 wifithermostat.com ® U.S. Registered Trademark.© 2012 Honeywell International Inc. 69-2720—01 M.S. 08-12 Printed in U.S.A. Apple, iPhone, iPad, iPod touch and iTunes are trademarks of Apple ...

69-2715EF—07 4 C C MCR33823 If you have an older thermostat with a sealed mercury tube, turn to page ii for proper disposal instructions. Terminal designation Installing your thermostat 2 Remove old thermostat faceplate and leave wires connected.2a Take a picture of the wire connections for later re...

5 69-2715EF—07 Installing your thermostat 6 Mount wallplate for thermostat. Mount your new wallplate using screws and anchors included with the thermostat.If necessary:Drill 3/16-in holes for drywall.Drill 7/32-in holes for plaster. Note: You may be able to use your existing wall anchors. Hold the w...

69-2715EF—07 6 Installing your thermostat Wiring (heat pump system only) 7B Wire thermostat to your heat pump. a Starting with the C Wire, match the sticky tag on the wire to the terminal labels. You must have a C wire. b Loosen screw, insert wire on inside edge of terminal, then tighten screw. c Ve...

7 69-2715EF—07 Installing your thermostat Alternate wiring (heat pump system only) Use this if your wire labels don’t match the terminal labels. Note: You must have a C wire or equivalent. See page 6. Alternate wiring key (heat pump system only) Do not use K terminal. For future use. If old thermost...

9 69-2715EF—07 Installing your thermostat 11 Set clock to current day and time. 11a Press s or t to set clock. 11b Press Set Day . 11c Press s or t to select the day of week. 11d Press Done to save. (Press and hold a st button to quickly change a setting.) MCR33908 HOLD MCR33909 HOLD 12 Determine yo...

69-2715EF—07 10 1 Connect to your thermostat. 1a Make sure the thermostat displays Wi-Fi Setup . 1b On the wireless device (laptop, tablet, smartphone), view the list of available Wi-Fi networks. 1c Connect to the network called NewThermostat _123456 (the number will vary). Note: If you are asked to...

11 69-2715EF—07 Connecting to your Wi-Fi network Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup page: • Tr y performing a network rescan by pressing the Rescan button. This is helpful in areas with a lot of networks. • If you are connecting to a hidden network,...

69-2715EF—07 12 Registering your thermostat online M31570 To view and set your thermostat remotely, you must have a Total Connect Comfort account. Use the following steps.1 Open the Total Connect Comfort web site. Go to mytotalconnectcomfort.com View the Thermostat Registration video at honeywellhom...

13 69-2715EF—07 3c Also notice that your thermostat displays its signal strength. Congratulations! You’re done. You can now control your thermostat from anywhere through your tablet, laptop, or smartphone Total Connect Comfort free app is available for Apple ® iPhone ® , iPad ® and iPod touch ® devi...

69-2715EF—07 14 Press Fan to select On or Auto (toggle to re-select). Auto : Fan runs only when the heating or cooling system is on. Auto is the most commonly used setting. On : Fan is always on. Note: Options may vary depending on your heating/cooling equipment. Setting the fan MCR33895 1 Press Set...

15 69-2715EF—07 Adjusting program schedules 1 Press Set Clock/Day/Schedule , then Set Schedule . 2 Press s or t to set your Monday (Mon) Wake time, then press Next . 3 Press s or t to set the temperature for this period, then press Next . 4 Set time and temperature for the next time period (Leave). ...

69-2715EF—07 16 Unregistering thermostat If you remove the thermostat from your Total Connect Comfort website account (for example, you’re moving and leaving the thermostat behind), the thermostat will display Register at Total Connect until it is re-registered. M33876 Disconnecting Wi-Fi Replacing ...

17 69-2715EF—07 Smart Response Technology This feature allows the thermostat to “learn” how long the heating/cooling system takes to reach programmed temperature settings, so the temperature is reached at the time you set.For example: Set the Wake time to 6:00 am, and the temperature to 70 °F (21 °C...

69-2715EF—07 18 Setting functions and options You can change options for a number of system functions. Available functions depend on the type of system you have. The functions, along with available options, are described on pages 18–19.This thermostat is pre-set for a single-stage heating/cooling sy...

69-2715EF—07 20 Frequently asked questions Q: Q Will my thermostat still work if I lose my Wi-Fi connection? Q: A Yes, the thermostat will operate your heating and/or cooling system with or without Wi-Fi. Q: Q How do I find the password to my router? Q: A Contact the manufacturer of the router or ch...

21 69-2715EF—07 Troubleshooting Lost Signal If the no-Wi-Fi indicator displays in place of the Wi-Fi strength indicator in the upper right hand corner of the home screen: • Check another device to be sure Wi-Fi is working in your home; if not, call your Internet Ser vice Provider. • Move the router....

23 69-2715EF—07 Glossary C wire The “C” or common wire brings 24 VAC power to the thermostat from the heating/cooling system. Some older mechanical or battery operated thermostats may not have this wire connection. It is necessary for establishing a Wi-Fi connection to your home network. Heat Pump h...

69-2715EF—07 24 1-year limited warranty For warranty information go to Honeywellhome.com/support

HOLD M37771 RTH6500WF Serie inteligente RTH6580WF1001 RTH6585R1006 Termostato programable Guía del usuario Lea y guarde estas instrucciones. Para obtener ayuda, visite honeywellhome.com/support En la caja, encontrará lo siguiente: • Termostato• Placa de pared (adherida al termostato) • Tornillos y a...

69-2715EF—07 ii Este termostato funciona con sistemas comunes de 24 V, como aplicaciones de aire forzado, hidrónicas, de una bomba de calor, de aceite, de gas y eléctricas. No funciona con sistemas de milivoltios, como una chimenea a gas, ni con sistemas de 120 V/240 V, como la calefacción de zócalo...

69-2715EF—07 1 Acerca de su nuevo termostato Referencia rápida de los controles y la pantalla de inicio........................................... 2Cronogramas de ahorro de energía predeterminados .................................. 2 Instalación Instalación del termostato ..............................

69-2715EF—07 2 Referencia rápida de los controles y la pantalla de inicio Una vez que el termostato esté instalado, podrá visualizar la pantalla de inicio. Partes de esta pantalla cambiarán según cómo la vea. La pantalla se ilumina cuando presiona cualquier botón. Permanece iluminada durante 8 segun...

69-2715EF—07 4 Instalación del termostato C C MCR33823 Si el termostato existente tiene un tubo de mercurio sellado, vaya a la página ii para obtener instrucciones sobre cómo desecharlo adecuadamente. Designación de los terminales 2 Retire el termostato existente. 2a Tome una fotografía de las conex...

5 69-2715EF—07 Instalación del termostato 6 Monte la placa de pared para termostato. Monte la nueva placa de pared con los tornillos y anclajes incluidos con el termostato.Si fuese necesario:Taladre agujeros de 3/16 in (4.8 mm) en paneles de yeso.Taladre agujeros de 7/32 in (5.6 mm) en yeso. Nota: p...

69-2715EF—07 6 Instalación del termostato Cableado (sistema de bomba de calor únicamente) 7B Coloque los cables del termostato a su bomba de calor. a Comience con el cable C y coloque la etiqueta autoadhesiva en el cable con las etiquetas del terminal. Debe tener un cable C. b Afloje el tornillo, in...

7 69-2715EF—07 Instalación del termostato Cableado alternativo (sistema de bomba de calor únicamente) Utilícelo si las etiquetas de los cables no coinciden con las etiquetas de los terminales. Nota: debe tener un cable C o equivalente. Refiérase a la página 6. Clave para cableado alternativo (sistem...

9 69-2715EF—07 Instalación del termostato 11 Configure el reloj al día y hora actual.11a Presione s o t para configurar el reloj. 11b Presione Set Day . 11c Presione s o t para seleccionar el día de la semana. 11d Presione Done (terminado) para guardar. (Presione y sostenga un botón st para cambiar ...

69-2715EF—07 10 1 Conecte el termostato. 1a Verifique que el termostato muestre Wi-Fi Setup (configuración de WiFi). 1b Consulte la lista de todas las redes WiFi disponibles en el dispositivo inalámbrico (computadora tipo tablet, computadora portátil o teléfono inteligente). 1c Conéctese a la red de...

69-2715EF—07 12 Registro del termostato en línea M31570 Para ver y configurar el termostato de manera remota, debe tener una cuenta en Total Connect Comfort. Siga los siguientes pasos.1 Abra el sitio web Total Connect Comfort. Vaya a mytotalconnectcomfort.com Mire el video Thermostat Registration (R...

13 69-2715EF—07 Registro del termostato en línea 3b Cuando el termostato se haya registrado correctamente, la pantalla de registro de Total Connect Comfort le mostrará el mensaje SUCCESS (registro exitoso). En la pantalla del termostato, verá Setup Complete (se ha completado la configuración) durant...

69-2715EF—07 14 Configuración del ventilador Presione Fan (Ventilador) para seleccionar la opción On (Encendido) o Auto (alterne para volver a seleccionar la opción). Auto : el ventilador funciona solo cuando el sistema de calefacción o refrigeración está encendido. La configuración de uso más frecu...

15 69-2715EF—07 Ajuste de los cronogramas del programa 1 Presione Set Clock/Day/Schedule (configurar reloj/ día/cronograma) y luego, Set Schedule (configurar cronograma). 2 Presione s o t para configurar la hora de despertarse el lunes (Mon) y luego presione Next (siguiente). 3 Presione s o t para c...

69-2715EF—07 16 Baja del termostato Si usted retira el termostato de su cuenta en el sitio Web Total Connect Comfort (por ejemplo, si se muda y deja el termostato), el termostato mostrará el mensaje Register at Total Connect (Registar en Total Connect) hasta que se vuelva a registrar. M33876 Descone...

17 69-2715EF—07 M33881 Tecnología Smart Response Esta característica permite que el termostato “sepa” cuánto demora el sistema de calefacción/refrigeración en alcanzar las configuraciones de temperatura programadas, de manera que se alcance esa temperatura a la hora que usted configuró.Por ejemplo: ...

69-2715EF—07 18 Opciones y funciones de configuración Puede cambiar las opciones en diversas funciones del sistema. Las funciones disponibles dependen del tipo de sistema que usted tenga. Las funciones junto con las opciones disponibles se describen en las páginas 18–19.Este termostato está preconfi...

69-2715EF—07 20 Preguntas frecuentes Q: P ¿Mi termostato seguirá funcionando si pierdo la conexión a la red WiFi? Q: R Sí, el termostato pondrá en funcionamiento el sistema de calefacción o refrigeración con o sin la conexión a la red WiFi. Q: P ¿Cómo encuentro la contraseña de mi enrutador? Q: R Co...

21 69-2715EF—07 Localización y solución de problemas Señal perdida Si se muestra el indicador no-Wi-Fi en vez del indicador de potencia WiFi en la esquina superior derecha de la pantalla de inicio: • Revise otro dispositivo para verificar que la conexión WiFi está funcionando en su hogar; si no, lla...

23 69-2715EF—07 Glosario Cable C El cable “C”, o común, le transmite 24 V CA al termostato desde el sistema de calefacción/refrigeración. Es posible que algunos termostatos mecánicos o con batería más antiguos no tengan esta conexión de cables. Es necesario para establecer una conexión de la red WiF...

69-2715EF—07 24 POLIZA DE GARANTIA IMPORTADO EN MEXICO POR: INSTROMET MEXICANA S DE R L DE C V Avenida Insurgentes 2453, Piso 6, Tizapan, Alvaro Obregon, Ciudad de Mexico, CP 01090 Telefono: 01 (55) 800 00423Instromet Mexicana S. de R.L. de C.V. garantiza que éste producto está libre de defectos en ...

DOC ID - 1188 • Rev 06.02 6 / 16 3. Tap Add Devices . 4. Select the device category, Climate . 5. Select the device type, Honeywell – VisionPRO, FocusPRO, RedLINK Hub . 6. Read through the displayed information, and then tap Authorize Device .

DOC ID - 1188 • Rev 06.02 7 / 16 7. Enter your credentials into the Honeywell TCC page and tap Sign In . 8. Read through the provided information and tap Accept.

DOC ID - 1188 • Rev 06.02 9 / 16 3. Tap Edit Devices. 4. Tap the 3 dots next to the thermostat, and then tap Remove . 5. Tap Confirm.

DOC ID - 1188 • Rev 06.02 10 / 16 Pairing and removing the thermostat in FusionPro Follow the below steps to add and remove a thermostat in FusionPro. To add the thermostat in FusionPro: 1. Click Accounts in the side menu. 2. Locate the desired account in the list, and then click View . The Account ...

DOC ID - 1188 • Rev 06.02 11 / 16 3. Click the Devices tab, and then click Add Devices . 4. Select the device category ( Climate ).

DOC ID - 1188 • Rev 06.02 12 / 16 5. Click Honeywell – VisionPro, FocusPro, RedLINK Hub . 6. Click Authorize Device. This will take you to the Honeywell sign in page.

DOC ID - 1188 • Rev 06.02 13 / 16 7. Enter the customer’s credentials and click Sign In . 8. Read through the information presented and click I Accept . This will redirect back to FusionPro and show the authorization status.

DOC ID - 1188 • Rev 06.02 14 / 16 9. Once the device is successfully authorized, click Return to Device List. To remove the thermostat with FusionPro: 1. Click Accounts in the side menu.

DOC ID - 1188 • Rev 06.02 15 / 16 2. Locate the desired account in the list, and then click View . The Account sub-menu is now available. 3. Click the Devices tab, and then click Delete next to the desired device.

DOC ID - 1188 • Rev 06.02 16 / 16 4. Click Delete to confirm. Contact information Clare Controls, LLC. 7519 Pennsylvania Ave, Suite 104 Sarasota, FL 34243 General: 941.328.3991 Fax: 941.870.9646 www.clarecontrols.com Integrator/Dealer Support: 941.404.1072 [email protected] Homeowner Support (ClareC...