Honeywell RCHT9510WFW2001/W - Manuals

5 33-00478–03 Using the Honeywell Home App Change System Mode Change Fan Setting Set Desired Temperature Set Sensor Priority Change Schedule Type Access Menu OptionsAvailable options shown in screens below Home Screen Menu Options

33-00478–03 6 Main Menu on Thermostat From Home Screen, press the menu icon at bottom of the display (3 horizontal lines). If this is not shown at home screen, touch screen to wake display first. Main Menu options System mode (Available modes vary depending on how the thermostat was configured) • He...

33-00478–03 8 Selecting system mode Touch homescreen to wake the thermostat.Touch the menu icon and then touch “Select Mode.” • Heat : Controls the heating system. • Cool : Controls the cooling system. • Off : Turns the heating and cooling systems off. • Auto : When enabled, the thermostat will auto...

33-00478–03 10 Setting the Fan Note: Fan setting not available for all system types.1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Touch Fan Choose on, auto, or circulate.Touch arrow in upper left to return to previous screen.Auto sett...

11 33-00478–03 Setting the Time/Date When the thermostat is linked to the home Wi-Fi router and registered to an account using the Honeywell Home app, the date and time will update automatically.If not using Wi-Fi you can set the time/date as follows:1. Touch any part of the display to wake the ther...

33-00478–03 12 Connect to Wi-Fi 1. Open the Menu 2. Scroll to and select “Wi-Fi” 3. Tap “Choose Network” 4. Select a network 1 2 Wi-Fi 3 Choose Network 4 Connect to the Honeywell Home App 1. Open the Menu 2. Tap “Connect App” 3. Follow the on-screen instructions 1 2 Connect App 3 1. Select thermosta...

13 33-00478–03 Enabling or disabling Wi-Fi and disconnecting and reconnecting to a Wi-Fi network On thermostat Enable Wi-Fi 1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Scroll down and select “Wi-Fi” 4. Verify “Enable” is selected. C...

33-00478–03 14 Setting a schedule on thermostat Select the menu icon at the bottom of the homescreen display. Then select Schedule. • If you want all days the same, select “grouped days.”• Touch the period you wish to edit (Wake, Away, Home, or sleep). • If you want all days separate, select “Single...

15 33-00478–03 Scheduling through the app Flexible scheduling: You can choose to use location-based temperature control (geofence technology), time-based scheduling, or use a combination of both to make sure your home is always comfortable. • Location-based temperature control : Using geofencing tec...

33-00478–03 16 Scheduling through the app (continued) 1. Select “Options” to turn schedule off, create a new time-based schedule, or switch to Geofencing. 2. Set priority sensor(s) for each program. When location-based temperature control is used, the thermostat active homescreen display will show ”...

17 33-00478–03 Schedule override on Device With thermostat in heat, cool, auto, or em heat mode, press the up or down arrow to change the setpoint. (if thermostat is in auto mode, you need to press “heat to” or “cool to” first).If scheduling is enabled it will say “Hold until” and show a time at the...

33-00478–03 18 Setting Preferences Preference menu options let you select how the thermostat displays information or responds to certain situations.To access the Preferences menu:1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Scroll do...

19 33-00478–03 Cleaning the Thermostat Screen When you select the Clean Screen option, the screen is locked to prevent accidental changes to the thermostat while you clean the screen.1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Scrol...

33-00478–03 20 Configuration settings (new installation) NOTE: not all of the settings shown in the charts are shown in the initial installation menu. After saving those you could view all available settings using the revising settings option below)1. After the thermostat has powered up, touch “GET ...

21 33-00478–03 CSU # Configuration Setup Name Settings Default Notes 1000 Language • English• Francais• Espanol English None Room • Bedroom• Living space• Other No defaulted value In what type of room will this thermostat be installed?These questions are asked for two reasons-1. Other Smart Room Sen...

33-00478–03 22 ISU # Configuration Setup Name Settings Default Notes 2070 Cool Stages / Compressor stages 0, 1, 2 1 0 setting not available if the wire is detected on Y or system type (ISU 2000) is set to Heat Pump)On initial setup this will not be shown. Instead the thermostat determines the system...

33-00478–03 24 Advanced Features ADAPTIVE RECOVERY Over time, the T9 thermostat “learns” how long it takes your system to reach your programmed temperature setting.The thermostat turns on the heating/cooling system early and assures that the programmed temperature setting is reached at the programme...

25 33-00478–03 Alerts and notifications 1. The red dot above the Menu icon indicates an active alert or notification. Touch the Menu icon to view active Alerts & Notifications. 2. Touch Notifications to open this menu. 3. Touch the alert message to see more information about the alert. Notificat...

33-00478–03 26 Alerts Alert Message Meaning Action SET DATE AND TIME Date and time are required for features such as schedule Touch “Set Date and Time” button below alert message or register thermostat to Honeywell Home account. WIFI MODULE ERROR There is a failure of the Wi-Fi module in the thermos...

27 33-00478–03 IAQ REMINDERS You can set up IAQ reminders in the thermostat to remind users when filters, pads, UV bulbs, etc. need cleaning or replacement. • Air Filter 1• Humidifier Pad• Dehumidifier• Filter• Ventilator Filter• UV Bulb 1• UV Bulb 2 If you want to disable the alert, go MENU-PREFERE...

33-00478–03 28 Adding a wireless sensor 1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Scroll down and touch “Devices and Sensors”. 4. Touch “Add” 5. Follow the on-screen directions to pair and name your new sensor To Remove a Sensor f...

29 33-00478–03 Smart Room Sensor information When one or more wireless temperature/humidity/motion sensors have been linked to the thermostat by the installer, you can check the status of the sensor using the following steps. Checking the status of a sensor 1. Touch any part of the display to wake t...

31 33-00478–03 Frequently Asked Questions (FAQs) Wi-Fi connection questions Q: Will the thermostat still work if the Wi-Fi connection is lost? A: Yes, you can still manually adjust the temperature at the thermostat. However, some features such as location-based temperature control (geofencing techno...

33-00478–03 32 Other questions Q: How can I uninstall my T9 Smart thermostat? A: If you want to replace your T9 Smart thermostat, or if you’re moving out of your home and leaving the thermostat behind, you’ll first want to clear out the personal settings that are stored on the thermostat. (Even when...

33 33-00478–03 Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary.• Make sure power switch for heating and cooling is on.• Make sure furn...

33-00478–03 34 Specifications Temperature Ranges • Heat: 40 °F to 90 °F (4.5 °C to 32.0 °C)• Cool: 50 °F to 99 °F (10.0 °C to 37.0 °C) Operating Ambient Temperature • 32 °F to 120 °F (0 °C to 48.9 °C) Shipping Temperature • -20 °F to 120 °F (-28.9 °C to 48.9 °C) Operating Relative Humidity • 5% to 9...

35 33-00478–03 2-year limited warranty Resideo warrants this product, excluding battery, to be free from defects in workmanship or materials, under normal use and service, for a period of two (2) years from the date of first purchase by the original purchaser. If at any time during the warranty peri...

5 5 6 7 4 Take a picture of your existing wall plate’s wiring In order to capture all of the letters next to the terminals, be sure to take multiple pictures from different angles.You may need to reference this image later. Remove any jumpers A jumper is used to connect two terminals. It may look li...

7 11 12 13 Do you have a zoning panel? You have a zoning panel if you have multiple thermostats and one furnace or heating system. C-Wire Adapter installation is more complicated on zoned systems. Call 1-855-733-5465 to find a pro-installer. Proceed to the next step. Do you have an unused wire? Look...

9 Installing Your New Thermostat You will need: Level, pencil, drill and a drill bit Thermostat Screws UWP wallplate Wall Anchors

13 Getting the most from the T9 Wi-Fi Thermostat Prioritize Rooms (Requires optional Wireless Room Sensor accessory) Prioritize a specific room or multiple rooms, or let comfort follow your move using built-in motion detection. Control on the Go Adjust your thermostat from anywhere using your tablet...

14 Using your thermostat The screen will wake up by pressing the center area of the displayed temperature. 74 2 18% Indoor Temperature Displays the current indoor temperature. Adjust Temperature Touch the up and down arrows to set your desired temperature. Current Priority Displays the type of prior...

16 Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary.• Make sure power switch for heating & cooling system is on.• Make sure furnace...

17 Resideo warrants this product, excluding battery, to be free from defects in workmanship or materials, under normal use and service, for a period of two (2) years from the date of first purchase by the original purchaser. If at any time during the warranty period the product is determined to be d...

T9 Smart thermostat with Smart Room sensor User Guide 33-00478-03 Welcome This user guide is designed to help you get acquainted with your new T9 Smart thermostat. Check out the table of contents on page 2 to browse by topic. Need help? Get in touch. WEB: honeywellhome.comPHONE: 1-800-633-3991SOCIAL...

33-00478–03 2 TABLE OF CONTENTS Thermostat Features .......................................................................... page 3Thermostat overview .......................................................................... page 4Honeywell Home App overview .........................................

3 33-00478–03 Thermostat Features Flexible scheduling: You can choose to use location-based temperature control (geofence technology), program a set schedule or use a combination of both to make sure your home is always comfortable. • Location-based temperature control: Using geofence technology, th...

33-00478–03 4 Getting the most from the T9 Smart Thermostat Prioritize Rooms Prioritize a specific room or multiple rooms, or let comfort follow your move using built-in motion detection. Control on the Go Adjust your thermostat from anywhere using your tablet or smartphone. Save Energy With geofenc...

5 33-00478–03 Using the Honeywell Home App Change System Mode Change Fan Setting Set Desired Temperature Set Sensor Priority Change Schedule Type Access Menu OptionsAvailable options shown in screens below Home Screen Menu Options

33-00478–03 6 Main Menu on Thermostat From Home Screen, press the menu icon at bottom of the display (3 horizontal lines). If this is not shown at home screen, touch screen to wake display first. Main Menu options System mode (Available modes vary depending on how the thermostat was configured) • He...

33-00478–03 8 Selecting system mode Touch homescreen to wake the thermostat.Touch the menu icon and then touch “Select Mode.” • Heat : Controls the heating system. • Cool : Controls the cooling system. • Off : Turns the heating and cooling systems off. • Auto : When enabled, the thermostat will auto...

33-00478–03 10 Setting the Fan Note: Fan setting not available for all system types.1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Touch Fan Choose on, auto, or circulate.Touch arrow in upper left to return to previous screen.Auto sett...

11 33-00478–03 Setting the Time/Date When the thermostat is linked to the home Wi-Fi router and registered to an account using the Honeywell Home app, the date and time will update automatically.If not using Wi-Fi you can set the time/date as follows:1. Touch any part of the display to wake the ther...

33-00478–03 12 Connect to Wi-Fi 1. Open the Menu 2. Scroll to and select “Wi-Fi” 3. Tap “Choose Network” 4. Select a network 1 2 Wi-Fi 3 Choose Network 4 Connect to the Honeywell Home App 1. Open the Menu 2. Tap “Connect App” 3. Follow the on-screen instructions 1 2 Connect App 3 1. Select thermosta...

13 33-00478–03 Enabling or disabling Wi-Fi and disconnecting and reconnecting to a Wi-Fi network On thermostat Enable Wi-Fi 1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Scroll down and select “Wi-Fi” 4. Verify “Enable” is selected. C...

33-00478–03 14 Setting a schedule on thermostat Select the menu icon at the bottom of the homescreen display. Then select Schedule. • If you want all days the same, select “grouped days.”• Touch the period you wish to edit (Wake, Away, Home, or sleep). • If you want all days separate, select “Single...

15 33-00478–03 Scheduling through the app Flexible scheduling: You can choose to use location-based temperature control (geofence technology), time-based scheduling, or use a combination of both to make sure your home is always comfortable. • Location-based temperature control : Using geofencing tec...

33-00478–03 16 Scheduling through the app (continued) 1. Select “Options” to turn schedule off, create a new time-based schedule, or switch to Geofencing. 2. Set priority sensor(s) for each program. When location-based temperature control is used, the thermostat active homescreen display will show ”...

17 33-00478–03 Schedule override on Device With thermostat in heat, cool, auto, or em heat mode, press the up or down arrow to change the setpoint. (if thermostat is in auto mode, you need to press “heat to” or “cool to” first).If scheduling is enabled it will say “Hold until” and show a time at the...

33-00478–03 18 Setting Preferences Preference menu options let you select how the thermostat displays information or responds to certain situations.To access the Preferences menu:1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Scroll do...

19 33-00478–03 Cleaning the Thermostat Screen When you select the Clean Screen option, the screen is locked to prevent accidental changes to the thermostat while you clean the screen.1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Scrol...

33-00478–03 20 Configuration settings (new installation) NOTE: not all of the settings shown in the charts are shown in the initial installation menu. After saving those you could view all available settings using the revising settings option below)1. After the thermostat has powered up, touch “GET ...

21 33-00478–03 CSU # Configuration Setup Name Settings Default Notes 1000 Language • English• Francais• Espanol English None Room • Bedroom• Living space• Other No defaulted value In what type of room will this thermostat be installed?These questions are asked for two reasons-1. Other Smart Room Sen...

33-00478–03 22 ISU # Configuration Setup Name Settings Default Notes 2070 Cool Stages / Compressor stages 0, 1, 2 1 0 setting not available if the wire is detected on Y or system type (ISU 2000) is set to Heat Pump)On initial setup this will not be shown. Instead the thermostat determines the system...

33-00478–03 24 Advanced Features ADAPTIVE RECOVERY Over time, the T9 thermostat “learns” how long it takes your system to reach your programmed temperature setting.The thermostat turns on the heating/cooling system early and assures that the programmed temperature setting is reached at the programme...

25 33-00478–03 Alerts and notifications 1. The red dot above the Menu icon indicates an active alert or notification. Touch the Menu icon to view active Alerts & Notifications. 2. Touch Notifications to open this menu. 3. Touch the alert message to see more information about the alert. Notificat...

33-00478–03 26 Alerts Alert Message Meaning Action SET DATE AND TIME Date and time are required for features such as schedule Touch “Set Date and Time” button below alert message or register thermostat to Honeywell Home account. WIFI MODULE ERROR There is a failure of the Wi-Fi module in the thermos...

27 33-00478–03 IAQ REMINDERS You can set up IAQ reminders in the thermostat to remind users when filters, pads, UV bulbs, etc. need cleaning or replacement. • Air Filter 1• Humidifier Pad• Dehumidifier• Filter• Ventilator Filter• UV Bulb 1• UV Bulb 2 If you want to disable the alert, go MENU-PREFERE...

33-00478–03 28 Adding a wireless sensor 1. Touch any part of the display to wake the thermostat. 2. Touch the MENU icon at the bottom of the screen. 3. Scroll down and touch “Devices and Sensors”. 4. Touch “Add” 5. Follow the on-screen directions to pair and name your new sensor To Remove a Sensor f...

29 33-00478–03 Smart Room Sensor information When one or more wireless temperature/humidity/motion sensors have been linked to the thermostat by the installer, you can check the status of the sensor using the following steps. Checking the status of a sensor 1. Touch any part of the display to wake t...

33-00478–03 30 Battery Replacement (indoor sensor) The T9 thermostat does not use any batteries. It is powered by 24 volts from the HVAC transformer using the C (common) wire. The wireless indoor sensors use AAA Alkaline batteries. Batteries: Replace batteries in your indoor sensor when a warning ap...

31 33-00478–03 Frequently Asked Questions (FAQs) Wi-Fi connection questions Q: Will the thermostat still work if the Wi-Fi connection is lost? A: Yes, you can still manually adjust the temperature at the thermostat. However, some features such as location-based temperature control (geofencing techno...

33-00478–03 32 Other questions Q: How can I uninstall my T9 Smart thermostat? A: If you want to replace your T9 Smart thermostat, or if you’re moving out of your home and leaving the thermostat behind, you’ll first want to clear out the personal settings that are stored on the thermostat. (Even when...

33-00478–03 34 Specifications Temperature Ranges • Heat: 40 °F to 90 °F (4.5 °C to 32.0 °C)• Cool: 50 °F to 99 °F (10.0 °C to 37.0 °C) Operating Ambient Temperature • 32 °F to 120 °F (0 °C to 48.9 °C) Shipping Temperature • -20 °F to 120 °F (-28.9 °C to 48.9 °C) Operating Relative Humidity • 5% to 9...