Heath Zenith SL-6290 Series - Manuals

Heath Zenith SL-6290 Series – Manual in PDF format online.

Manuals:

Manual Heath Zenith SL-6290 Series

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24

Summary

Page 2 - Set the push button jumpers to match the chime receiver; See “Code and Tune Setting” section.

-2- 595-5507-11 2. Set the push button jumpers to match the chime receiver code. See “Code and Tune Setting” section. 1. Install alkaline type A23 12 volt push button battery. Remove back of case by pushing in tab on bottom with a small screwdriver. Make sure battery is oriented properly (see page 5...

Page 3 - Code and Tune Settings; Code Settings; . The push button and chime both have eight different jumper

-- 595-5507-11 Code and Tune Settings Code Settings Note: Most installations will not require you to change any jumpers on your chime and push button.WARNING: Disconnect chime unit from power source before opening code access door. Close door and replace screw before reconnecting to power. The push ...

Page 5 - Push Button Battery Replacement

-5- 595-5507-11 Push Button Battery Replacement Install an alkaline type A23 12 Volt battery. See diagram inside push but- ton for correct battery orientation. Remove screw to open access door Tune Setting (Not used on all models) Back of Chime 1 2 4 5 6 7 8 1 2 4 5 6 7 8 Inside Push Button * Code S...

Heath Zenith Manuals