Heath Zenith CB-2011 - Manuals

598-1111-01 2 INSTALLATION For easy installation, select an existing light with a wallswitch for replacement. W IRE THE L IGHT C ONTROL . ❒ Turn power off at the fuse or circuit breaker. ❒ Remove the existing light fixture. ❒ Install the mounting strap as shown using twoscrews that fit your junction...

598-1111-01 3 Motion Motion TEST AND ADJUSTMENT ❒ Turn on the circuit breaker and light switch. NOTE: Sensor has a 1 1 / 2 minute warm up period before it will detect motion. When first turned on or when switching modes wait 1 1 / 2 minutes. Bottom of Sensor Avoid aiming the sensor at: • Objects tha...

598-1111-01 4 POSSIBLE CAUSE 1. A flood lamp is positioned too close to the sensor or pointed at nearby ob-jects that cause heat to trigger thesensor. (Reposition the lamp away from the sensor or nearby objects.) 2. Light Control is pointed toward a heat source like an air vent, dryer vent, orbright...