Heath Zenith 6180 - Manuals

Heath Zenith 6180 – Manual in PDF format online.

Manuals:

Manual Heath Zenith 6180

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24

Summary

Page 2 - Chime with sawtooth hanger attached to back:

-2- 595-5506-10 12345 678 4. Mount push button. Use either screws or double sided tape to mount push button. To mount with screws, remove back of case by pushing in tab on bottom with a small screw-driver.Attach back of case to door jamb or wall. Snap front of push button on.When attaching push butt...

Page 3 - Chime with separate cover and base:; Code and Tune Settings; Code Settings; jumper positions 1 through 7 are used for setting the code.

-3- 595-5506-10 Chime with separate cover and base: The chime base can be mounted in two different ways. The base can be mounted using the keyholes or the three mounting holes. The base may be mounted hori-zontally or vertically depending upon the specific model purchased.1. Remove batteries from chi...

Page 5 - Troubleshooting; Chime does not sound:; • Do not mount chime or push button on metal or near metal studs. This; Regulatory Information; If the problem persists, call* for assistance at; No Service Parts Available for this Product

-5- 595-5506-10 Troubleshooting Chime does not sound: • Make sure push button and chime codes are the same (See pages 3 and 4).• Check orientation of push button battery (See page 4).• Check charge of push button and chime batteries, replace if necessary. Batteries seem OK, but the chime does not wo...

Heath Zenith Manuals