Heath Zenith 3003530 - Manuals

Heath Zenith 3003530 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24

Summary

Page 2 - Installation; Install alkaline type A23 12 volt push button; Troubleshooting; WARNING: To prevent possible SERIOUS INJURY or DEATH:

-2- 598-1073-03 Installation Important considerations: The sensor must be mounted to the door jamb. The magnet should be attached to the door. Sensor is for indoor use only. 2. Install alkaline type A23 12 volt push button battery (included). Remove back of case by pushing in tab on bottom with a sm...

Page 3 - Mount magnet. Repeat step 5 to attach magnet; If using spacer, use the two

-3- 598-1073-03 Use Optional Spacer if Needed 5. Mount sensor. Screw Mounting: Attach sensor back cover to wall using two short screws (provided). Snap sensor onto back cover. Tape Mounting: Apply foam tape to the sensor back cover. Stick sensor back cover to frame of door in desired position. Snap ...

Page 4 - Tune Settings

-- 598-1073-03 123 5678 1 2 3 5 6 7 8 Inside Sensor Remove screw to open access door Back of Chime Tune Setting Tune Setting (Not used on all models) Note: Some models might require the use of tweezers to remove and replace the jumpers. Tune Settings Your wireless chime has different selectable tune...

Heath Zenith Manuals