Epson XR510- Manuals

4 2. Setting Up the Printer 2-1. Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. The Printer User's Manual Roll Paper Adaptor(Option) Interface Cable(optional)

5 2-2. Connecting the Cables You can connect up the cables required for printing to the printer. They all connect to the connector panel on the back of the printer, which is shown below : Before connecting any of the cables, make sure that both the printer and the computer are turned off.

11 2-4. Dip Switch Setting The printer is set up at the factory to be appropriate for almost all users. On the other hand, offers some more settings for users with special requirements. It has DIP switches that allow you to change communication setting, such as handshaking and parity check, as well ...

12 2-4-2. Parallel Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF 5 Bi-Parallel mode DISABLED ENABLED OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-4-3. USB COMBO Interface ...

13 2-4-4. USB Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF ------------------------------------------------- old USB --------------...

15 DIP Switch Set 2 Functions Cutter SW FUNCTION ON OFF Remarks 3 Cutter FULL CUT PARTIAL CUT Only Epson mode Emulation FUNCTION SW-4 SW-5 Epson (TM-88) OFF OFF Paper low detect (*1) SW FUNCTION ON OFF 6 Paper Low Detect Do not Detect (*1) The detecting function of [Paper Low] is an option. Please s...

17 ♣CAUTION: When the paper is jammed with cutter, the top cover might be stuck. In this case, repeat power on and off several times. If the top cover is still stuck, please follow the steps to release the papers from jamming. 1. Make sure the printer is turned off. 2. Take out cutter cover as shown...

19 4. Self Test The self-test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, ROM version and DIP switch settings. This test is independent of any other equipment or software. Running the self test 1. Make sure the printer is tu...

20 5. Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you turn on the hex dump function, the printer prints all commands and other data in hexadecimal format along with a guide section to h...

21 6. Specifications Appendix A : Specifications 6-1. General Specifications (1) Printing Method Direct line thermal printing. (2) Print speed 200mm/sec. (Approx 35.4LPS) (3) Dot density 180 DPI (Hor / Ver) 180 / 180 (0.142mm / 0.142mm dot) (4) Printing Width 180 DPI Max 72mm (512 dots) (5) Number of p...

4 2. Setting Up the Printer 2-1. Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. The Printer User's Manual Roll Paper Adaptor(Option) Interface Cable(optional)

5 2-2. Connecting the Cables You can connect up the cables required for printing to the printer. They all connect to the connector panel on the back of the printer, which is shown below : Before connecting any of the cables, make sure that both the printer and the computer are turned off.

11 2-4. Dip Switch Setting The printer is set up at the factory to be appropriate for almost all users. On the other hand, offers some more settings for users with special requirements. It has DIP switches that allow you to change communication setting, such as handshaking and parity check, as well ...

12 2-4-2. Parallel Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF 5 Bi-Parallel mode DISABLED ENABLED OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-4-3. USB COMBO Interface ...

13 2-4-4. USB Interface Specification DIP Switch Set 1 Function SW FUNCTION ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF ------------------------------------------------- old USB --------------...

15 DIP Switch Set 2 Functions Cutter SW FUNCTION ON OFF Remarks 3 Cutter FULL CUT PARTIAL CUT Only Epson mode Emulation FUNCTION SW-4 SW-5 Epson (TM-88) OFF OFF Paper low detect (*1) SW FUNCTION ON OFF 6 Paper Low Detect Do not Detect (*1) The detecting function of [Paper Low] is an option. Please s...

17 ♣CAUTION: When the paper is jammed with cutter, the top cover might be stuck. In this case, repeat power on and off several times. If the top cover is still stuck, please follow the steps to release the papers from jamming. 1. Make sure the printer is turned off. 2. Take out cutter cover as shown...

19 4. Self Test The self-test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, ROM version and DIP switch settings. This test is independent of any other equipment or software. Running the self test 1. Make sure the printer is tu...

20 5. Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you turn on the hex dump function, the printer prints all commands and other data in hexadecimal format along with a guide section to h...

21 6. Specifications Appendix A : Specifications 6-1. General Specifications (1) Printing Method Direct line thermal printing. (2) Print speed 200mm/sec. (Approx 35.4LPS) (3) Dot density 180 DPI (Hor / Ver) 180 / 180 (0.142mm / 0.142mm dot) (4) Printing Width 180 DPI Max 72mm (512 dots) (5) Number of p...