Epson V11HA85020 - Installation Manual

Quick Setup

IMPORTANT:

Before using this product, make sure you read these instructions

and the safety instructions in the online User’s Guide.

Contents

Make sure your projector box includes all of these parts:

Projector

remote control

Android TV

®

remote control

Turn on your equipment

1

Turn on your computer or video source.

2

Plug in the projector. The status light blinks, then remains lit for a few
seconds before turning off.

3

Install the batteries into both remote controls.

Projector

remote control

Android TV

remote control

4

Press the

power button on the projector or projector remote control.

The projector beeps, the status light flashes blue, and then stays on.

Note:

To shut down the projector, press the

power button twice on

the projector or projector remote control.

5

Follow the on-screen instructions to connect the streaming media player,
pair the Android TV remote control, and then set up Android TV.

Note:

The default language of the projector menu system is English. To select

another language, press the

menu button on the projector remote control.

Use the directional pad and enter button to select

Extended

>

Language

,

then select your language. Press the

menu button to exit the menu system.

Connect the projector

Streaming media player

Connect the included streaming media player to your projector. To stream
content, make sure you have a Google

®

account, an internet connection, and an

active streaming account and enter your login information as necessary for each
app.

Note:

The first time you set up the projector, a screen prompts you to connect

the streaming media player.

1

Remove the side cover by pressing the
tab and sliding the cover towards the
rear of the projector.

2

Connect the HDMI extension cable to the

HDMI

port and the USB cable to the

USB

port, as shown.

3

Connect the HDMI and USB cables to the
streaming media player and fit it into the
port compartment.

4

Replace the side cover. The tab clicks
into place when the cover is fully
closed.

Video device or computer

Remove the side cover and connect an HDMI cable to the projector’s

HDMI

port. Replace the side cover and route the HDMI cable through the slot in the
back of the cover.

Note:

You will have to remove the streaming media player in order to connect

another device. For more information on connecting the projector to your
computer or other devices (camera, USB flash drive, etc.), see the online User’s
Guide.

Adjust the image

1

Make sure the projector is turned on and displaying an image.

Note:

If you still see a blank screen or have other display problems, see

the troubleshooting tips.

2

To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.

3

To reduce or enlarge the image, press the

menu button on the

projector remote control. Use the directional pad and enter button
to select

Settings

>

Installation

>

Zoom

. Press left or right on the

directional pad to adjust the image size. Press the

menu button to exit

the menu system.

4

To sharpen the image, turn the focus ring.

5

If your image looks like

or

, you may have placed the projector

off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can’t
move the projector, use the

keystone button on the projector remote

control to correct the image shape.

6

Your projector automatically adjusts an image that looks like

or

,

but if necessary you can press the

keystone button on the projector

remote control to correct it.

Note:

For more adjustment methods, see the online User’s Guide.

Using the remote control

Projector remote control

Adjust image
brightness

Adjust projector
volume

Adjust the image
shape

Turn projector

on and off

Change the

color mode

Navigate projector

menus

Access the home

screen

Mute the sound

Zoom into and out

of the image

Enter a selection

Access projector
menus

Freeze the projected
image

Turn off projector
display and mute
sound

Android TV remote control

Use voice commands
with Android TV

Turn streaming

device on and off

Go back to previous

function

Enter a selection

Adjust Android TV

volume

Display the Android
TV home screen

Display the Android
TV application list

Navigate menus

Open streaming apps

For more information on using the remote controls, see the online User’s Guide.

Note:

You must pair the Android TV remote control to the included streaming

device to adjust the Android TV volume and use the Google Assistant

TM

feature.

See the online User’s Guide for more information.

Troubleshooting

•

If you see a blank screen, check the following:

•

Press the

A/V mute button on the projector remote control to

see if the image was turned off.

•

Make sure the Status light on the projector is blue and not flashing.

•

Press the

power button on the projector remote control to wake

the projector from standby or sleep mode, if necessary.

•

If you see a blank screen when a computer is connected, check the
following:

•

On Windows

®

, hold down the Windows key and press

P

at the same

time, then click

Duplicate

.

•

If you are using a Mac laptop with macOS 12, select

System

Preferences

>

Displays

>

Display Settings

. Select the projector,

then choose the mirror option for your display from the drop-down
menu.

On macOS 11 and older, open

System Preferences

and select

Displays

. Click the

Arrangement

tab and select the

Mirror

Displays

checkbox.

•

If the projector does not respond to the projector remote control,
make sure the batteries in the projector remote control are installed
correctly. Replace the batteries if necessary.

•

If the Android TV streaming device does not respond to the remote
control, try the following:

•

Make sure you are using the Android TV remote control and that it
is paired with the streaming device.

•

The projector and Android TV remote control may have lost pairing.
Perform pairing again by holding down the enter and volume down
buttons on the Android TV remote control.

•

Press the

power button on the Android TV remote control to

make sure the streaming device is turned on.

Registration

Register today to get product updates and exclusive offers. You can register
online at

http://epson.com/webreg

.

Where to get help

Manual

For more information about using the projector, you can view or download the
online manual from the Epson website, as described below.

Internet support

Visit

http://epson.com/support/cofh02

(U.S.) or

http://epson.ca/support/cofh02

(Canada) to download software and utilities,

view manuals, get FAQs and troubleshooting advice, or contact Epson.

Telephone support services

To use the Epson

®

PrivateLine

®

Support service, call (800) 637-7661. This service

is available for the duration of your warranty period. You may also speak with
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 7

am

to 4

pm

, Pacific Time, Monday through Friday. Days and

hours of support are subject to change without notice. Toll or long distance
charges may apply.

CO-FH02