Epson XR510- User Manual

Page 2 - All specifications are subject to change without notice

3-Year Limited Warranty POS-X Inc. provides this three (3)-Year Warranty for this product. For terms and conditions please go to: WWW.POS-X.COM All speciﬁcations are subject to change without notice

Page 3 - TABLE OF CONTENTS

TABLE OF CONTENTS 1. Parts Identiﬁcations 3 2. Setting up the printer 4 2.1 Unpacking 4 2.2 Connecting the cables 5 2.3 Loading the roll paper 9 2.4 Dip switch setting 11 3. Control panel and other functions 18 3.1 Control panel 18 3.2 Error Indicating 18 4. Self Test 19 5. Hexadecimal Dump 20 6. Sp...

Page 4 - Parts Identifications

Page 5 - Setting Up the Printer; your dealer for assistance.

4 2. Setting Up the Printer 2-1. Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. The Printer User's Manual Roll Paper Adaptor(Option) Interface Cable(optional)

Page 6 - You can connect up the cables required for printing to the printer.

5 2-2. Connecting the Cables You can connect up the cables required for printing to the printer. They all connect to the connector panel on the back of the printer, which is shown below : Before connecting any of the cables, make sure that both the printer and the computer are turned off.

Page 12 - DIP Switch Set 1 Functions; Baudrate selection

11 2-4. Dip Switch Setting The printer is set up at the factory to be appropriate for almost all users. On the other hand, offers some more settings for users with special requirements. It has DIP switches that allow you to change communication setting, such as handshaking and parity check, as well ...

Page 13 - COMBO Serial Option

12 2-4-2. Parallel Interface Speciﬁcation DIP Switch Set 1 Function SW FUNCTION ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF 5 Bi-Parallel mode DISABLED ENABLED OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF 2-4-3. USB COMBO Interface ...

Page 14 - Baud rate selection

13 2-4-4. USB Interface Speciﬁcation DIP Switch Set 1 Function SW FUNCTION ON OFF DEFAULT 2 Hexadecimal HEXDUMP NORMAL OFF Print Density (DIP-SW2) Print Density SW-1 SW-2 Low Power ON ON Normal OFF ON Normal ON OFF Dark OFF OFF ------------------------------------------------- old USB --------------...

Page 16 - DIP Switch Set 2 Functions; Cutter; If Dip Switch is [ON] without any special option purpose.

15 DIP Switch Set 2 Functions Cutter SW FUNCTION ON OFF Remarks 3 Cutter FULL CUT PARTIAL CUT Only Epson mode Emulation FUNCTION SW-4 SW-5 Epson (TM-88) OFF OFF Paper low detect (*1) SW FUNCTION ON OFF 6 Paper Low Detect Do not Detect (*1) The detecting function of [Paper Low] is an option. Please s...

Page 18 - on and off several times.

17 ♣CAUTION: When the paper is jammed with cutter, the top cover might be stuck. In this case, repeat power on and off several times. If the top cover is still stuck, please follow the steps to release the papers from jamming. 1. Make sure the printer is turned off. 2. Take out cutter cover as shown...

Page 20 - This test is independent of any other equipment or software.; Running the self test; Press the FEED button to continue printing.

19 4. Self Test The self-test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, ROM version and DIP switch settings. This test is independent of any other equipment or software. Running the self test 1. Make sure the printer is tu...

Page 21 - be useful in finding software problems.; To use the hex dump feature, follow these steps; hexadecimal codes and the second column gives the ASC; Hexadecimal Dump

20 5. Hexadecimal Dump This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in ﬁnding software problems. When you turn on the hex dump function, the printer prints all commands and other data in hexadecimal format along with a guide section to h...

Page 22 - Appendix A : Specifications; Direct line thermal printing.

21 6. Speciﬁcations Appendix A : Speciﬁcations 6-1. General Speciﬁcations (1) Printing Method Direct line thermal printing. (2) Print speed 200mm/sec. (Approx 35.4LPS) (3) Dot density 180 DPI (Hor / Ver) 180 / 180 (0.142mm / 0.142mm dot) (4) Printing Width 180 DPI Max 72mm (512 dots) (5) Number of p...

Table of Contents:

Other Manuals for Epson XR510

Summary

Other Epson Models