Epson UB-E02- Manuals

Epson UB-E02– User Manual in PDF format online.

Manuals:

User Manual Epson UB-E02

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Part Names; The following view shows the part names of the UB-E02.; Switches; please ask the dealer where you purchased your product.; Connecting the Cables; Make sure both the printer and the host computer are turned off.

2 Part Names The following view shows the part names of the UB-E02. Note: This photograph shows the TM-H6000II printer with the UB-E02 installed. Switches When using this interface board, the DIP switches of the TM printer must be set to “parallel” with the appropriate settings. Set the reset signal...

Page 3 - How to Set Up the UB-E02; Preparation; Printing a Status Sheet; and configure only one printer at a time.; Resetting the UB-E02 to Factory Defaults; Setup; Reference Guide

3 How to Set Up the UB-E02 Preparation Printing a Status Sheet Power on the printer. Then, hold down the push button on the interface card for more than 3 seconds. The printer prints the parameters for the UB-E02. You can check all setting values necessary (IP address, Subnet mask, Gateway address) ...

Page 4 - EMC Standards Applied; WARNING; CE Marking; For Canadian Users

4 ❏ Obtaining the TMNetWinConfig and the UB-E02 Technical Reference Guide For customers from North, Central, or South America, go to the following web site: http://pos.epson.com/ For customers from other countries, go to the following web site: http://www.epson-pos.com/Select the product name from t...

Epson Manuals