Canon UC 40 Hi- Manuals

Table of Contents iv Two-sided Copying (Two-sided Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . 1-56 Making Two-sided Copies from One-sided Originals (1 2-Sided) . . 1-57Making Two-sided Copies from Two-sided Originals (2 2-Sided) . . 1-59Making One-sided Copies from Two-sided Originals ...

Table of Contents v Erasing a Copy Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54 Recalling a Previous Copy Setting (Recall) . . . . . . . . . . . . . . . . . . . . . . 2-57 Inverting Original Images (Nega/Posi) . . . . . . . . . . . . . . . . . . . . . . . . ....

How to Use This Manual vi How to Use This Manual Symbols Used in This Manual The following symbols are used in this manual, for explanations of procedures and restrictions, handling cautions, and instructions that should be observed for safety. Keys Used in This Manual The following symbols and key ...

How to Use This Manual vii Displays Used in This Manual Screenshots of the touch panel display used in this manual are those taken when the Finisher-J1, Cassette Feeding Unit-W1, Feeder (DADF-H1), Printer Kit, and FAX Board are attached to the imageRUNNER 3300. Note that functions that cannot be use...

CHAPTER 1-1 1 Basic Copying This chapter describes the basic copy functions. What the imageRUNNER 3300/2800/2200 Series Machine Can Do . . . . . . . . . . . . . . . . 1-3 Various Kinds of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-3 Basic Cop ying 1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do Most operations of this machine are done from the touch panel display. To use the copy function of this machine, press keys in accordance with the messages display...

1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-4 Basic Cop ying See p. 1-44. When you select “Collate” Press to select or cancel Collate, Group, or Staple modes. See p. 1-56. When you select “1 2-Sided” Press to select or cancel the Two-sided mode. You can copy one-sided/two-sided ori...

1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-5 Basic Cop ying Special Features screen 1/2 The screen on the left, which appears on the touch panel display when you press “Special Features” in the Copy Basic Features screen, is called the Special Features screen. This screen is divid...

1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-6 Basic Cop ying See p. 2-15. Press to select or cancel the Transparency Interleaving mode. This mode enables you to insert a sheet between each transparency when copying transparencies. (You can make the same prints on the interleaf shee...

1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-7 Basic Cop ying See p. 2-39. When you select “1 To 2.” Press to select or cancel the Image Separation mode. This mode enables you to divide an original into 2 or 4 sections and enlarge each section onto a copy sheet of a specified size. ...

1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-8 Basic Cop ying Special Features screen 2/2 See p. 2-58. Press to make copies with the entire black/white image inverted. See p. 2-59. Press to copy an original with the image repeated in the vertical or horizontal direction. See p. 2-62...

Flow of Copy Operations 1-9 Basic Cop ying 1 Flow of Copy Operations This section describes the flow of basic copy operations. NOTE • For the following items, see the Reference Guide: - Main power and control panel power - Routine maintenance 1 Press (Copy). If the message <You must insert a cont...

1 Flow of Copy Operations 1-10 Basic Cop ying If the message <Enter the Department ID and Password using the numeric keys.> appears, enter the Department ID and Password. (See the Reference Guide .) 2 Place your original. NOTE • For instructions on placing the original, see the Reference Guide...

1 Flow of Copy Operations 1-11 Basic Cop ying 4 Set the desired copy mode in the Special Features screen. The Special Features screen is divided into two screens. Press “ ▼ ”or “ ▲ ” to select the desired mode. You can continue setting other available modes. (See ‘Useful Copy Functions,’ in Chapter ...

1 Flow of Copy Operations 1-13 Basic Cop ying ● When the following screen is displayed: Follow the instructions in the screen, and press (Start) once for each original. When scanning is completed, press “Done.” ● When you want to copy a different original while printing: Press “Done,” and place your...

1 Flow of Copy Operations 1-14 Basic Cop ying ● When you want to stop a copy job: Press (Stop). For instructions on canceling a copy job, see the Reference Guide . NOTE • After you have pressed (Stop), several copies may be output from the machine. • You can also stop a copy job in the System Monito...

Entering the Copy Quantity 1-15 Basic Cop ying 1 Entering the Copy Quantity The machine allows up to 999 copies to be made. The maximum number of copies allowable can be changed. For details, contact your service representative. Specifying the Required Number of Copies 1 Press - (numeric keys) to en...

1 Entering the Copy Quantity 1-16 Basic Cop ying Changing the Copy Quantity 1 Press (Clear) to clear the entered number. 2 Press - (numeric keys) to enter the desired copy quantity (1 to 999). The copy quantity appears on the upper right side of the Basic Features screen. IMPORTANT • You cannot chan...

Selecting the Copy Paper Size (Paper Select) 1-17 Basic Cop ying 1 Selecting the Copy Paper Size (Paper Select) You can set the machine to automatically select the paper size, or you can specify the paper size for a copy job. NOTE • When copying an original onto the same size paper at a 100% copy ra...

1 Selecting the Copy Paper Size (Paper Select) 1-18 Basic Cop ying 1 Place your original, and press “Paper Select.” 2 Select “Auto,” and press “Done.” The following screen is displayed. 3 Press (Start). Copying starts.

1 Selecting the Copy Paper Size (Paper Select) 1-19 Basic Cop ying Specifying Paper Size/Type (Manual Paper Selection) You can make copies after selecting the paper size and type (color, recycled, etc.) of paper loaded in the paper drawer. 1 Place your originals, and press “Paper Select.” NOTE • The...

1 Selecting the Copy Paper Size (Paper Select) 1-20 Basic Cop ying ● When you select “Stack Bypass Setting”: Select the paper size, and press “Next.” Select the paper type, and press “OK.” NOTE • When placing paper other than a standard size, press “Free Size.” • When loading envelopes, press “Envel...

Adjusting Exposure and Image Quality 1-22 Basic Cop ying 1 Adjusting Exposure and Image Quality The exposure and image quality can be adjusted when the original is scanned. NOTE • You can also change the exposure while printing. (See ‘Changing the Copy Exposure During Printing,’ on p. 1-26.) Adjusti...

1 Adjusting Exposure and Image Quality 1-23 Basic Cop ying Selecting Image Quality You can adjust image quality to the level best suited to the quality of text or photo originals. The following three modes are available for adjusting image quality: IMPORTANT • Combinations of these three modes (Text...

1 Adjusting Exposure and Image Quality 1-24 Basic Cop ying 1 Place your originals, press “ ,” and select the type of original (Text, Text/Photo, or Photo). When <Photo Mode> in Copy Settings is set to on, you can select “Printed Img.” or “Photo.” (See ‘Setting the Photo Mode of the Copy Functi...

1 Adjusting Exposure and Image Quality 1-25 Basic Cop ying 3 Press (Start). Copying starts. NOTE • To cancel the copy exposure setting, press “A.” • To cancel all settings and return the machine to the Standard mode, press (Reset). Automatic Adjustment of Exposure and Image Quality 1 Place your orig...

1 Adjusting Exposure and Image Quality 1-26 Basic Cop ying Changing the Copy Exposure During Printing The copy exposure can be changed during printing. 1 Press “Light” or “Dark,” in the screen displayed during printing. Move the indicator above “Light” and “Dark” to the left to make the exposure lig...

Changing the Copy Ratio (Copy Ratio) 1-27 Basic Cop ying 1 Changing the Copy Ratio (Copy Ratio) You can set the machine to adjust the copy ratio automatically, or to specify the copy ratio for a job. NOTE • If you want to make copies at the copy ratio of 100%, press “Direct.” Enlarging/Reducing Orig...

1 Changing the Copy Ratio (Copy Ratio) 1-29 Basic Cop ying 4 To reduce, select a reduction ratio. To enlarge, select an enlargement ratio. Following your selection, press “Done.” The display returns to the Basic Features screen, and the selected copy ratio is displayed. 5 Press (Start). Copying star...

1 Changing the Copy Ratio (Copy Ratio) 1-30 Basic Cop ying 1 Place your original, and press “Copy Ratio.” 2 Set a copy ratio by pressing “–” or “+,” and press “Done.” You can also use - (numeric keys) to input the value. Even if you entered the ratio with - (numeric keys), you can change the entered...

1 Changing the Copy Ratio (Copy Ratio) 1-34 Basic Cop ying 1 Place your originals, and press “Copy Ratio.” 2 Press “Entire Image,” and press “Done.” The specified mode is set and the display returns to the Basic Features screen. 3 Press (Start). Copying starts. NOTE • To cancel the setting, press “C...

1 Changing the Copy Ratio (Copy Ratio) 1-36 Basic Cop ying Making Copies with the Same XY Copy Ratio (Zoom) 1 Place your originals, and press “Copy Ratio.” 2 Press “Other Zoom.” 3 Press “Zoom Program.”

1 Changing the Copy Ratio (Copy Ratio) 1-37 Basic Cop ying 4 Press “Original Size” and enter the original size press “Copy Size” and enter the copy size press “OK.” When entering values in millimeters, you can use - (numeric keys) to enter numbers and (Clear) to clear your entries. The display retur...

1 Changing the Copy Ratio (Copy Ratio) 1-38 Basic Cop ying Making Copies with Different XY Copy Ratios (XY Zoom) 1 Place your originals, and press “Copy Ratio.” 2 Press “Other Zoom.” 3 Press “Zoom Program.”

1 Changing the Copy Ratio (Copy Ratio) 1-40 Basic Cop ying 6 Press (Start). Copying starts. NOTE • To return the copy ratio to 100%, press “Direct.” • To cancel the setting, press “Copy Ratio” “Other Zoom” “Zoom Program” “Cancel,” in this order. • To cancel all settings and return the machine to the...

1 Changing the Copy Ratio (Copy Ratio) 1-41 Basic Cop ying ■ Automatically Specifying the Copy Ratio (Auto XY Zoom) The XY copy ratio is automatically set to suit the size of the selected paper. IMPORTANT • You cannot copy highly transparent originals, such as transparencies, in the Auto XY Zoom mod...

Collating Copies (Finisher) 1-44 Basic Cop ying 1 Collating Copies (Finisher) The Finisher mode can be selected to collate the copies in various ways by pages or copy sets. NOTE • When envelopes, tracing paper, transparencies, or labels are selected, Finisher functions cannot be set. • When heavywei...

1 Collating Copies (Finisher) 1-48 Basic Cop ying ■ When <Offset> Is Set Copies are shifted to the front and back, alternatively. Collating Copies into Sets in Page Order (Collate) 1 Place your originals, and press “Finisher.” NOTE • When Auto Collate is set to “On,” the Offset Collate mode is...

1 Collating Copies (Finisher) 1-49 Basic Cop ying 2 Press “Collate,” and press “OK.” When you want hole punches made, press “Hole Punch.” ● When you select “Rotate”: When the Automatic Paper Selection mode is set, press “Next” select LTR, LTRR, STMT, or STMTR-size paper press “OK.” Press “OK,” as lo...

1 Collating Copies (Finisher) 1-50 Basic Cop ying - Available paper size is loaded in both horizontal and vertical directions. - Drawer Eligibility for APS/ADS of the paper drawers loaded with available paper size is set to “On.” Â 3 Press (Start). When the original is placed on the platen glass, fo...

1 Collating Copies (Finisher) 1-52 Basic Cop ying ● When you select “Rotate” When the Automatic Paper Selection mode is set, press “Next” select LTR, LTRR, STMT, or STMTR-size paper press “OK.” Press “OK,” as long as: - Available paper size is selected manually. - Available paper size is loaded in b...

1 Collating Copies (Finisher) 1-54 Basic Cop ying When you want hole punches made, press “Hole Punch.” When the Finisher-J1 is attached, the saddle stitch position cannot be selected. For details of the saddle stitch position, see the Reference Guide. ● When you select “Staple,” with the Saddle Fini...

Two-sided Copying (Two-sided Mode) 1-56 Basic Cop ying 1 Two-sided Copying (Two-sided Mode) This function enables you to make two-sided copies from one- or two-sided originals or one-sided copies from two-sided originals. IMPORTANT • When the machine is operating in the Two-sided Mode, you cannot us...

1 Two-sided Copying (Two-sided Mode) 1-57 Basic Cop ying Making Two-sided Copies from One-sided Originals (1 2-Sided) This feature enables you to make two-sided copies from one-sided originals. IMPORTANT • Place the originals horizontally when copying originals that are LTRR or STMTR-size. If these ...

1 Two-sided Copying (Two-sided Mode) 1-58 Basic Cop ying 2 Press “1 2-Sided.” To select the type of two-sided copy: press “Option” select the type of two-sided original press “Done.” 3 Press “OK.” The display returns to the Basic Features screen, and <1 2-Sided> is displayed above “Two-sided M...

1 Two-sided Copying (Two-sided Mode) 1-60 Basic Cop ying 2 Press “2 2-Sided.” To select the type of two-sided copy: press “Option” select the type of two-sided original press “Done.” 3 Press “OK.” The display returns to the Basic Features screen, and <2 2-Sided> is displayed above “Two-sided M...

1 Two-sided Copying (Two-sided Mode) 1-66 Basic Cop ying 3 Select the type of two-sided original, and press “OK.” If “Left/Right Two-sided” is selected, the left and right pages of a book or a magazine are copied to the front and back of a single sheet. If you select “Front/Back Two-sided,” the fron...

Reserved Copying 1-67 Basic Cop ying 1 Reserved Copying You can select copy settings and scan originals even if the machine is currently printing. Your scanned documents are processed after the current job is completed. NOTE • You can reserve up to five copy jobs for the Copy function, including the...

1 Interrupting the Current Job to Make Priority Copies (Interrupt Mode) 1-70 Basic Cop ying 4 Once the original is scanned, remove it from the machine. When the Interrupt copy job is completed, the interrupted printing operation resumes. IMPORTANT • If you want to continue making Interrupt copies, w...

Checking a Sample Set Before Copying (Sample Set) 1-71 Basic Cop ying 1 Checking a Sample Set Before Copying (Sample Set) Before making multiple copies, you can check the copy result using the Sample Set mode. IMPORTANT • “Sample Set” is displayed only when you set to make multiple copies of your or...

Checking the Copy Mode Settings (Setting Confirmation) 1-74 Basic Cop ying 1 Checking the Copy Mode Settings (Setting Confirmation) When the copy mode settings are selected in screens, for example, the Special Features screen, you can check those settings in a list. 1 Press “Setting Confirmation” in ...

Changing or Canceling a Selected Copy Mode (Setting Cancel) 1-75 Basic Cop ying 1 Changing or Canceling a Selected Copy Mode (Setting Cancel) From the Setting Confirmation screen, you can also change or cancel selected functions. 1 Press “Setting Confirmation” in the Basic Features screen. The Setti...

1 Changing or Canceling a Selected Copy Mode (Setting Cancel) 1-76 Basic Cop ying ● To change a mode (for example, Sharpness) Perform the same steps as when setting the mode. Change the setting as you desire, and press “OK.” The display returns to the Setting Confirmation screen. ● To cancel a mode ...

CHAPTER 2-1 2 Useful Copy Functions This chapter describes more advanced copy functions. Copying Facing Pages in a Book on Two Separate Sheets of Paper (Two-page Separation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Adding Front and Bac...

2. Useful Copy Functions 2-2 Useful Cop y Functions 2 Making Sharp Contrast Copies (Sharpness) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-64

Copying Facing Pages in a Book on Two Separate Sheets of Paper (Two-page Separation) 2-3 Useful Cop y Functions 2 Copying Facing Pages in a Book on Two Separate Sheets of Paper (Two-page Separation) This mode enables you to copy facing pages in a book or a magazine onto separate sheets of paper. IMP...

Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-5 Useful Cop y Functions 2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) This function enables you to set the machine to automatically add f...

2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-7 Useful Cop y Functions ■ Chapter Page Adds chapter pages between the pages of copy sets. Since the chapter page is always copied on one side, this function is useful when you want to divide th...

2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-8 Useful Cop y Functions 3 When copying onto the front cover, back cover, or sheet insertion, press “Printed,” and press “Next.” When setting Two-sided Copying, press “Option,” set the side to b...

2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-9 Useful Cop y Functions ● When you select “Back Cover”: Select the side to be copied onto, and press “Next.” ● When you select “Sheet Insertion” or “Chapter Page”: Set all positions where the s...

2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-10 Useful Cop y Functions 5 Select the paper source for each cover/sheet insertion press “OK” press “Done.” The specified mode is set and the display returns to the Basic Features screen. IMPORT...

Making Copies for Use as a Booklet (Booklet) 2-11 Useful Cop y Functions 2 Making Copies for Use as a Booklet (Booklet) You can copy one-sided or two-sided originals in such a way that the copies are made into a booklet. IMPORTANT • When the machine is operating in the Booklet mode, you cannot use t...

2 Making Copies for Use as a Booklet (Booklet) 2-12 Useful Cop y Functions 2 Select the original size, and press “Next.” If two-sided originals will be copied, also press “2-Sided Original” to select how the two-sided originals are to be saddle stitched, and press “OK.” NOTE • To select an A or B se...

2 Making Copies for Use as a Booklet (Booklet) 2-13 Useful Cop y Functions NOTE • Set the cover paper face down in the stack bypass. ● When you select “Add Cover”: Select “Yes” or “No” to specify whether or not to copy on the cover, and press “Next.” Select the type of paper, and press “Next.” IMPOR...

2 Making Copies for Use as a Booklet (Booklet) 2-14 Useful Cop y Functions 4 Select whether to saddle stitch the booklet, and press “OK” press “Done.” The specified mode is set and the display returns to the Basic Features screen. NOTE • When the number of sheets exceeds 11, stapling is not performe...

Making Copies with Sheets of Paper Interleaved Between Transparencies (Trans- parency Interleaving) 2-15 Useful Cop y Functions 2 Making Copies with Sheets of Paper Interleaved Between Transparencies (Transparency Interleaving) Use this mode when copying onto transparencies fed from the stack bypass...

2 Making Copies with Sheets of Paper Interleaved Between Transparencies (Trans-parency Interleaving) 2-16 Useful Cop y Functions ■ When Printing on the Interleaf Sheets: Outputs a printed transparency and a printed interleaf sheet alternately. 1 Place your original, and press “Special Features” pres...

2 Making Copies with Sheets of Paper Interleaved Between Transparencies (Trans- parency Interleaving) 2-17 Useful Cop y Functions 3 Select the size of the interleaf sheet, and press “Next.” 4 Select whether or not to copy the image onto the interleaf sheet, and press “OK” press “Done.” The selected ...

2 Making Copies with Sheets of Paper Interleaved Between Transparencies (Trans-parency Interleaving) 2-18 Useful Cop y Functions 5 Place the transparencies in the stack bypass, and press (Start). Scanning starts. When the original is placed on the platen glass, follow the instructions that appear on...

Making Copies with Original Image Shifted (Shift) 2-19 Useful Cop y Functions 2 Making Copies with Original Image Shifted (Shift) Makes copies with the entire image shifted to the center or a corner. IMPORTANT • When the machine is operating in the Shift mode, you cannot use the Image Repeat or Mirr...

Making Copies with Margins (Margin) 2-23 Useful Cop y Functions 2 Making Copies with Margins (Margin) This mode enables you to make copies with the entire original image shifted by a designated width to the left, right, top, or bottom to create a margin on the copies. Use this mode to make copies re...

2 Making Copies with Margins (Margin) 2-25 Useful Cop y Functions ● When you select “Left Margin” or “Right Margin”: Use “–” or “+” to set the margin for the front and back (0" to 13/16" or 0 to 20mm). Then press “OK,” and press “Done.” The specified mode is set and the screen returns to the...

Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-26 Useful Cop y Functions 2 Erasing Shadows and Frame Lines from Copies (Frame Erase) This mode erases shadows and lines that appear when copying various types of originals. IMPORTANT • Combination of the Original Frame Erase, Book Frame Er...

2 Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-29 Useful Cop y Functions 4 Select the desired original frame erase width using “-” or “+,” and press “OK” press “Done.” When entering values in millimeters, you can use - (numeric keys) and (Clear). Even when you enter the values with - ...

2 Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-31 Useful Cop y Functions 4 Press each key: “Top,” “Left,” “Center,” “Right,” and “Bottom” set the desired book frame erase width using “-” or “+” press “OK” “Done.” When entering values in millimeters, you can use - (numeric keys) and (C...

2 Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-32 Useful Cop y Functions 5 Press (Start). Copying starts. NOTE • To cancel the setting, press “Special Features” “Frame Erase” “Cancel,” in this order. • To cancel all settings and return the machine to the Standard mode, press (Reset). ...

2 Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-33 Useful Cop y Functions The position of the binding holes refers not to the position in which the original is placed on the platen glass, but to the position of the binding holes viewed when the surface of the original that you want to ...

2 Reducing Two, Four, or Eight Originals to Fit on a Single Copy Sheet (Image Com-bination) 2-36 Useful Cop y Functions 1 Place your originals, and press “Special Features” press “Image Combination.” NOTE • When Auto Collate is set to “On,” the Collate mode or the Offset Collate mode is automaticall...

2 Reducing Two, Four, or Eight Originals to Fit on a Single Copy Sheet (Image Com- bination) 2-37 Useful Cop y Functions 3 Select the desired Image Combination feature, and press “Next.” If you want to make two-sided copies, press “2-Sided Copy,” select the opening method, and press “OK.” Press “Opt...

2 Reducing Two, Four, or Eight Originals to Fit on a Single Copy Sheet (Image Com-bination) 2-38 Useful Cop y Functions 4 Select the paper size, and press “OK” press “Done.” The specified mode is set and the display returns to the Basic Features screen. IMPORTANT • You cannot set Automatic Paper Sel...

2 Dividing an Original into Equal Sections and Enlarging Each Section on a Separate Copy Sheet (Image Separation) 2-41 Useful Cop y Functions If “2-Sided Copy” is selected, select the opening method, and press “OK.” 3 Select the layout of the final page of the original, and press “Next.” You can red...

Feeding Different-size Originals Together in the Feeder (Different Size Originals) 2-43 Useful Cop y Functions 2 Feeding Different-size Originals Together in the Feeder (Different Size Originals) This function enables you to copy different-size originals together in one group, by setting them in the...

2 Feeding Different-size Originals Together in the Feeder (Different Size Originals) 2-44 Useful Cop y Functions 2 Select the type of Different Size Originals mode, and press “OK” press “Done.” When you are setting originals of the same width, press “Same Width.” When you are setting originals of di...

Copying Separately-set Originals (Job Build) 2-45 Useful Cop y Functions 2 Copying Separately-set Originals (Job Build) This mode enables you to scan too many originals to set at once, by dividing them into multiple batches. You can use both the feeder and the platen glass for scanning. The original...

2 Copying Separately-set Originals (Job Build) 2-46 Useful Cop y Functions 2 Press “Job Build,” and press “Done.” The specified mode is set and the display returns to the Basic Features screen. 3 Press (Start). Scanning starts. NOTE • To cancel scanning, press “Cancel” or (Stop). 4 When scanning is ...

2 Copying Separately-set Originals (Job Build) 2-47 Useful Cop y Functions When scanning two-sided originals, press “2-sided Original.” Select the type of two-sided original, and press “OK.” - Do not forget to set or cancel the Two-sided Original mode according to the type of originals. Repeat this ...

Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-48 Useful Cop y Functions 2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) You can store any possible combination of the Copy functions, up to nine settings, in a memory key, and then name that key. It is useful...

2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-49 Useful Cop y Functions 2 Press “Mode Memory.” 3 Press “Store/Erase.” 4 Press “Store.”

2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-50 Useful Cop y Functions 5 Select the desired memory key from among memory keys “M1” to “M9,” and press “Next.” NOTE • A mode memory key already storing copy settings shows a small, black square ( ■ ) in the lower right corner. ...

2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-51 Useful Cop y Functions ● If you select a memory key already storing a copy setting: Select “Yes” to overwrite the stored settings. Select “No” to cancel storing. When storing is completed, the message <Stored in memory.>...

2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-54 Useful Cop y Functions Recalling Copy Settings 1 Press “Special Features,” and press “Mode Memory.” 2 Select the memory key storing the copy settings you want to use confirm the stored settings press “OK” press “Done.” The dis...

2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-55 Useful Cop y Functions 3 Press “Erase.” 4 Select a memory key to be erased, and press “Next.” The message appears to confirm that you want to erase the copy job. IMPORTANT • Check the copy settings before you erase them. NOTE ...

Recalling a Previous Copy Setting (Recall) 2-57 Useful Cop y Functions 2 Recalling a Previous Copy Setting (Recall) With this function, you can recall up to three previous copy settings and make copies using these settings. IMPORTANT • One copy job is defined by setting the number of copies, exposur...

Inverting Original Images (Nega/Posi) 2-58 Useful Cop y Functions 2 Inverting Original Images (Nega/Posi) This function enables you to make copies of the original image inverting the black and the white areas. 1 Place your originals, and press “Special Features” press “ ▼ .” 2 Press “Nega/Posi,” and...

Making Copies with the Original Image Repeated (Image Repeat) 2-59 Useful Cop y Functions 2 Making Copies with the Original Image Repeated (Image Repeat) You can repeatedly copy the image of an original in either the vertical or horizontal direction. The following two setting methods are available f...

2 Making Copies with the Original Image Repeated (Image Repeat) 2-60 Useful Cop y Functions ■ Manual Setting The original image is copied a specified number of times. IMPORTANT • When the machine is operating in the Image Repeat (manual setting) mode, you cannot use the Entire Image, Book 2-Sided, T...

2 Making Copies with the Original Image Repeated (Image Repeat) 2-61 Useful Cop y Functions ● Manual setting Press “–” or “+” to set the number of images. The number of times the image can be repeated is from 1 to 20. IMPORTANT • Depending on how many times you have manually set the image to be repe...

Making Copies with Image Reversed (Mirror Image) 2-62 Useful Cop y Functions 2 Making Copies with Image Reversed (Mirror Image) This mode copies the image of the original reversed as a reflection in the mirror. IMPORTANT • When the machine is operating in the Mirror Image mode, you cannot use the En...

Making Sharp Contrast Copies (Sharpness) 2-64 Useful Cop y Functions 2 Making Sharp Contrast Copies (Sharpness) This mode allows you to make copies of original images with the contrast reproduced more sharply or more softly. To make copies with text or lines reproduced more sharply, use “High.” To m...

Copy Settings List 3-2 Setting/Stor ing Specifications of the Cop y Function 3 Copy Settings List The following items can be stored or set in the Copy Settings screen. Settings marked * are default settings.*1: Displayed only when the Feeder (DADF-H1) is attached.*2: Not displayed when the Finisher-...

Setting Standard Keys 3-3 Setting/Stor ing Specifications of the Cop y Function 3 Setting Standard Keys You can store up to two Standard keys from the Copy Ratio, Finisher, and Two-sided Mode keys on the Basic Features screen, the keys on the Special Features screen, or the memory keys containing co...

3 Setting Standard Keys 3-4 Setting/Stor ing Specifications of the Cop y Function 3 Select the desired modes to be stored with the Standard key, and press “OK.” NOTE • To cancel storing, press “Cancel.” 4 Press “Done.” Repeat this procedure. The display returns to the Basic Features screen. Example:...

Setting Automatic Collate On/Off 3-5 Setting/Stor ing Specifications of the Cop y Function 3 Setting Automatic Collate On/Off This mode allows automatic selection of the Collate (Offset Collate) mode when the original is placed in the feeder. This is helpful when making multiple copies, because you ...

Setting Image Orientation Priority to On/Off 3-6 Setting/Stor ing Specifications of the Cop y Function 3 Setting Image Orientation Priority to On/Off The image orientation may be printed conversely depending on the copy mode set. With this function, you can set whether or not to copy the image in th...

Setting the Job Duration Display 3-7 Setting/Stor ing Specifications of the Cop y Function 3 Setting the Job Duration Display When Job Duration Display is set to “On,” the time remaining until completion of the copy job (Job Duration Time) is indicated in minutes on the touch panel display. NOTE • T...

Setting Auto Orientation to On/Off 3-8 Setting/Stor ing Specifications of the Cop y Function 3 Setting Auto Orientation to On/Off Using parameters such as original size and zoom ratio, this function automatically rotates the image to the most suitable position for the specified paper size. NOTE • Th...

Setting the Photo Mode of the Copy Function 3-9 Setting/Stor ing Specifications of the Cop y Function 3 Setting the Photo Mode of the Copy Function You can set whether or not to use the Photo mode in the Copy function. When the Photo Mode is “On,” you can select “Printed Image” and “Photo” when maki...

Changing the Current Standard Settings 3-10 Setting/Stor ing Specifications of the Cop y Function 3 Changing the Current Standard Settings Standard Settings refers to a combination of Copy modes that the machine automatically sets after the power is turned on or when (Reset) is pressed. The Standard...

3 Changing the Current Standard Settings 3-11 Setting/Stor ing Specifications of the Cop y Function 3 Press “Yes.” To cancel storing the currently displayed settings as the Standard Settings, press “No.” This screen is displayed for about two seconds as the settings currently displayed are stored as...

Restoring Settings to Default Copy Settings 3-13 Setting/Stor ing Specifications of the Cop y Function 3 Restoring Settings to Default Copy Settings Items that have been changed in the Copy Settings can be returned to their default settings. 1 Call up the desired screen as follows: 2 Press “Yes.” To...

CHAPTER 4-1 4 Appendix Chart of Available Combination of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Chart of Available Combination of Functions 4-2 Appendix 4 Chart of Available Combination of Functions The chart shows the settings combinations when you want to reconfigure the functions. EnlargementZoom Designation XY ZoomAuto Zoom modeZoom ProgramEntire ImageAutomatic Exposure ControlPrinted Imag...

Index 4-6 Appendix 4 Index 1 to 2 ......................................................................................................................................... 2-391 to 4 ........................................................................................................................