Page 2 - About the Manuals for the Machine; Copying Guide
About the Manuals for the Machine The manuals for this machine are divided as follows. Please read them to suit your needs. The manuals supplied with optional equipment are included in the list above.Depending on the system configuration and product purchased, some manuals may be unavailable (irrelev...
Page 3 - How This Manual Is Organized; Basic Copying
1 2 3 4 How This Manual Is Organized Basic Copying Useful Copy Functions Setting/Storing Specifications of the Copy Function Appendix Chap 1 Chap 2 Chap 3 Chap 4 • Considerable effort has been made to make sure that this manual is free of inaccuracies and omissions.• However, as we are constantly imp...
Page 4 - iii; Table of Contents; Chapter 1
Table of Contents iii Table of Contents How This Manual Is Organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii How to Use This Manual . . . . . . . . . . . ...
Page 5 - Chapter 2
Table of Contents iv Two-sided Copying (Two-sided Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . 1-56 Making Two-sided Copies from One-sided Originals (1 2-Sided) . . 1-57Making Two-sided Copies from Two-sided Originals (2 2-Sided) . . 1-59Making One-sided Copies from Two-sided Originals ...
Page 6 - Chapter 3
Table of Contents v Erasing a Copy Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54 Recalling a Previous Copy Setting (Recall) . . . . . . . . . . . . . . . . . . . . . . 2-57 Inverting Original Images (Nega/Posi) . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 7 - How to Use This Manual; Symbols Used in This Manual; The following symbols and key names are used in this manual.; WARNING
How to Use This Manual vi How to Use This Manual Symbols Used in This Manual The following symbols are used in this manual, for explanations of procedures and restrictions, handling cautions, and instructions that should be observed for safety. Keys Used in This Manual The following symbols and key ...
Page 8 - vii; Displays Used in This Manual; Place the original, and press “Special Features.”; Press this key for operation
How to Use This Manual vii Displays Used in This Manual Screenshots of the touch panel display used in this manual are those taken when the Finisher-J1, Cassette Feeding Unit-W1, Feeder (DADF-H1), Printer Kit, and FAX Board are attached to the imageRUNNER 3300. Note that functions that cannot be use...
Page 9 - CHAPTER
CHAPTER 1-1 1 Basic Copying This chapter describes the basic copy functions. What the imageRUNNER 3300/2800/2200 Series Machine Can Do . . . . . . . . . . . . . . . . 1-3 Various Kinds of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 11 - Various Kinds of Copies; Copy Basic Features screen
What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-3 Basic Cop ying 1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do Most operations of this machine are done from the touch panel display. To use the copy function of this machine, press keys in accordance with the messages display...
Page 12 - When you select “Collate”; See the; SCENE
1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-4 Basic Cop ying See p. 1-44. When you select “Collate” Press to select or cancel Collate, Group, or Staple modes. See p. 1-56. When you select “1 2-Sided” Press to select or cancel the Two-sided mode. You can copy one-sided/two-sided ori...
Page 13 - Special Features screen 1/2; When you select “Front Cover”
1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-5 Basic Cop ying Special Features screen 1/2 The screen on the left, which appears on the touch panel display when you press “Special Features” in the Copy Basic Features screen, is called the Special Features screen. This screen is divid...
Page 14 - When you select “Original Frame Erase”
1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-6 Basic Cop ying See p. 2-15. Press to select or cancel the Transparency Interleaving mode. This mode enables you to insert a sheet between each transparency when copying transparencies. (You can make the same prints on the interleaf shee...
Page 15 - When you select “1 To 2.”; CITY
1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-7 Basic Cop ying See p. 2-39. When you select “1 To 2.” Press to select or cancel the Image Separation mode. This mode enables you to divide an original into 2 or 4 sections and enlarge each section onto a copy sheet of a specified size. ...
Page 16 - Special Features screen 2/2
1 What the imageRUNNER 3300/2800/2200 Series Machine Can Do 1-8 Basic Cop ying Special Features screen 2/2 See p. 2-58. Press to make copies with the entire black/white image inverted. See p. 2-59. Press to copy an original with the image repeated in the vertical or horizontal direction. See p. 2-62...
Page 17 - Basic Cop; Flow of Copy Operations; Press
Flow of Copy Operations 1-9 Basic Cop ying 1 Flow of Copy Operations This section describes the flow of basic copy operations. NOTE • For the following items, see the Reference Guide: - Main power and control panel power - Routine maintenance 1 Press (Copy). If the message <You must insert a cont...
Page 18 - Place your original.; Set the copy mode in the Basic Features screen.
1 Flow of Copy Operations 1-10 Basic Cop ying If the message <Enter the Department ID and Password using the numeric keys.> appears, enter the Department ID and Password. (See the Reference Guide .) 2 Place your original. NOTE • For instructions on placing the original, see the Reference Guide...
Page 19 - Set the desired copy mode in the Special Features screen.; Enter the copy quantity.
1 Flow of Copy Operations 1-11 Basic Cop ying 4 Set the desired copy mode in the Special Features screen. The Special Features screen is divided into two screens. Press “ ▼ ”or “ ▲ ” to select the desired mode. You can continue setting other available modes. (See ‘Useful Copy Functions,’ in Chapter ...
Page 21 - When the following screen is displayed:; When you want to copy a different original while printing:
1 Flow of Copy Operations 1-13 Basic Cop ying ● When the following screen is displayed: Follow the instructions in the screen, and press (Start) once for each original. When scanning is completed, press “Done.” ● When you want to copy a different original while printing: Press “Done,” and place your...
Page 22 - When you want to stop a copy job:; When you want to interrupt a copy job:
1 Flow of Copy Operations 1-14 Basic Cop ying ● When you want to stop a copy job: Press (Stop). For instructions on canceling a copy job, see the Reference Guide . NOTE • After you have pressed (Stop), several copies may be output from the machine. • You can also stop a copy job in the System Monito...
Page 23 - Entering the Copy Quantity; Specifying the Required Number of Copies
Entering the Copy Quantity 1-15 Basic Cop ying 1 Entering the Copy Quantity The machine allows up to 999 copies to be made. The maximum number of copies allowable can be changed. For details, contact your service representative. Specifying the Required Number of Copies 1 Press - (numeric keys) to en...
Page 24 - Changing the Copy Quantity
1 Entering the Copy Quantity 1-16 Basic Cop ying Changing the Copy Quantity 1 Press (Clear) to clear the entered number. 2 Press - (numeric keys) to enter the desired copy quantity (1 to 999). The copy quantity appears on the upper right side of the Basic Features screen. IMPORTANT • You cannot chan...
Page 25 - Selecting the Copy Paper Size; Automatic Paper Selection (Auto Paper Selection)
Selecting the Copy Paper Size (Paper Select) 1-17 Basic Cop ying 1 Selecting the Copy Paper Size (Paper Select) You can set the machine to automatically select the paper size, or you can specify the paper size for a copy job. NOTE • When copying an original onto the same size paper at a 100% copy ra...
Page 26 - Place your original, and press “Paper Select.”
1 Selecting the Copy Paper Size (Paper Select) 1-18 Basic Cop ying 1 Place your original, and press “Paper Select.” 2 Select “Auto,” and press “Done.” The following screen is displayed. 3 Press (Start). Copying starts.
Page 27 - Place your originals, and press “Paper Select.”; Select the desired paper size.; When Finisher-J1 is attached
1 Selecting the Copy Paper Size (Paper Select) 1-19 Basic Cop ying Specifying Paper Size/Type (Manual Paper Selection) You can make copies after selecting the paper size and type (color, recycled, etc.) of paper loaded in the paper drawer. 1 Place your originals, and press “Paper Select.” NOTE • The...
Page 28 - When you select “Stack Bypass Setting”:
1 Selecting the Copy Paper Size (Paper Select) 1-20 Basic Cop ying ● When you select “Stack Bypass Setting”: Select the paper size, and press “Next.” Select the paper type, and press “OK.” NOTE • When placing paper other than a standard size, press “Free Size.” • When loading envelopes, press “Envel...
Page 30 - Adjusting Exposure and Image Quality; Adjusting Copy Exposure; Place your originals, and press “Light” or “Dark.”
Adjusting Exposure and Image Quality 1-22 Basic Cop ying 1 Adjusting Exposure and Image Quality The exposure and image quality can be adjusted when the original is scanned. NOTE • You can also change the exposure while printing. (See ‘Changing the Copy Exposure During Printing,’ on p. 1-26.) Adjusti...
Page 31 - Selecting Image Quality; Text Mode; Photo mode
1 Adjusting Exposure and Image Quality 1-23 Basic Cop ying Selecting Image Quality You can adjust image quality to the level best suited to the quality of text or photo originals. The following three modes are available for adjusting image quality: IMPORTANT • Combinations of these three modes (Text...
Page 32 - Place your originals, press “
1 Adjusting Exposure and Image Quality 1-24 Basic Cop ying 1 Place your originals, press “ ,” and select the type of original (Text, Text/Photo, or Photo). When <Photo Mode> in Copy Settings is set to on, you can select “Printed Img.” or “Photo.” (See ‘Setting the Photo Mode of the Copy Functi...
Page 33 - Automatic Adjustment of Exposure and Image Quality
1 Adjusting Exposure and Image Quality 1-25 Basic Cop ying 3 Press (Start). Copying starts. NOTE • To cancel the copy exposure setting, press “A.” • To cancel all settings and return the machine to the Standard mode, press (Reset). Automatic Adjustment of Exposure and Image Quality 1 Place your orig...
Page 34 - Changing the Copy Exposure During Printing; Press “Light” or “Dark,” in the screen displayed during printing.
1 Adjusting Exposure and Image Quality 1-26 Basic Cop ying Changing the Copy Exposure During Printing The copy exposure can be changed during printing. 1 Press “Light” or “Dark,” in the screen displayed during printing. Move the indicator above “Light” and “Dark” to the left to make the exposure lig...
Page 35 - Changing the Copy Ratio; Reduce
Changing the Copy Ratio (Copy Ratio) 1-27 Basic Cop ying 1 Changing the Copy Ratio (Copy Ratio) You can set the machine to adjust the copy ratio automatically, or to specify the copy ratio for a job. NOTE • If you want to make copies at the copy ratio of 100%, press “Direct.” Enlarging/Reducing Orig...
Page 37 - Original
1 Changing the Copy Ratio (Copy Ratio) 1-29 Basic Cop ying 4 To reduce, select a reduction ratio. To enlarge, select an enlargement ratio. Following your selection, press “Done.” The display returns to the Basic Features screen, and the selected copy ratio is displayed. 5 Press (Start). Copying star...
Page 38 - Place your original, and press “Copy Ratio.”
1 Changing the Copy Ratio (Copy Ratio) 1-30 Basic Cop ying 1 Place your original, and press “Copy Ratio.” 2 Set a copy ratio by pressing “–” or “+,” and press “Done.” You can also use - (numeric keys) to input the value. Even if you entered the ratio with - (numeric keys), you can change the entered...
Page 42 - Place your originals, and press “Copy Ratio.”
1 Changing the Copy Ratio (Copy Ratio) 1-34 Basic Cop ying 1 Place your originals, and press “Copy Ratio.” 2 Press “Entire Image,” and press “Done.” The specified mode is set and the display returns to the Basic Features screen. 3 Press (Start). Copying starts. NOTE • To cancel the setting, press “C...
Page 44 - Making Copies with the Same XY Copy Ratio (Zoom)
1 Changing the Copy Ratio (Copy Ratio) 1-36 Basic Cop ying Making Copies with the Same XY Copy Ratio (Zoom) 1 Place your originals, and press “Copy Ratio.” 2 Press “Other Zoom.” 3 Press “Zoom Program.”
Page 45 - Press “Original Size” and enter the original size
1 Changing the Copy Ratio (Copy Ratio) 1-37 Basic Cop ying 4 Press “Original Size” and enter the original size press “Copy Size” and enter the copy size press “OK.” When entering values in millimeters, you can use - (numeric keys) to enter numbers and (Clear) to clear your entries. The display retur...
Page 46 - Making Copies with Different XY Copy Ratios (XY Zoom)
1 Changing the Copy Ratio (Copy Ratio) 1-38 Basic Cop ying Making Copies with Different XY Copy Ratios (XY Zoom) 1 Place your originals, and press “Copy Ratio.” 2 Press “Other Zoom.” 3 Press “Zoom Program.”
Page 48 - Manually Specifying the Copy Ratio (XY Zoom)
1 Changing the Copy Ratio (Copy Ratio) 1-40 Basic Cop ying 6 Press (Start). Copying starts. NOTE • To return the copy ratio to 100%, press “Direct.” • To cancel the setting, press “Copy Ratio” “Other Zoom” “Zoom Program” “Cancel,” in this order. • To cancel all settings and return the machine to the...
Page 49 - Automatically Specifying the Copy Ratio (Auto XY Zoom)
1 Changing the Copy Ratio (Copy Ratio) 1-41 Basic Cop ying ■ Automatically Specifying the Copy Ratio (Auto XY Zoom) The XY copy ratio is automatically set to suit the size of the selected paper. IMPORTANT • You cannot copy highly transparent originals, such as transparencies, in the Auto XY Zoom mod...
Page 52 - Collating Copies
Collating Copies (Finisher) 1-44 Basic Cop ying 1 Collating Copies (Finisher) The Finisher mode can be selected to collate the copies in various ways by pages or copy sets. NOTE • When envelopes, tracing paper, transparencies, or labels are selected, Finisher functions cannot be set. • When heavywei...
Page 56 - Collating Copies into Sets in Page Order (Collate); Place your originals, and press “Finisher.”; Copies
1 Collating Copies (Finisher) 1-48 Basic Cop ying ■ When <Offset> Is Set Copies are shifted to the front and back, alternatively. Collating Copies into Sets in Page Order (Collate) 1 Place your originals, and press “Finisher.” NOTE • When Auto Collate is set to “On,” the Offset Collate mode is...
Page 57 - When you select “Rotate”:
1 Collating Copies (Finisher) 1-49 Basic Cop ying 2 Press “Collate,” and press “OK.” When you want hole punches made, press “Hole Punch.” ● When you select “Rotate”: When the Automatic Paper Selection mode is set, press “Next” select LTR, LTRR, STMT, or STMTR-size paper press “OK.” Press “OK,” as lo...
Page 58 - Collating Copies into Groups of the Same Page (Group); Place your original, and press “Finisher.”
1 Collating Copies (Finisher) 1-50 Basic Cop ying - Available paper size is loaded in both horizontal and vertical directions. - Drawer Eligibility for APS/ADS of the paper drawers loaded with available paper size is set to “On.” Â 3 Press (Start). When the original is placed on the platen glass, fo...
Page 60 - When you select “Rotate”
1 Collating Copies (Finisher) 1-52 Basic Cop ying ● When you select “Rotate” When the Automatic Paper Selection mode is set, press “Next” select LTR, LTRR, STMT, or STMTR-size paper press “OK.” Press “OK,” as long as: - Available paper size is selected manually. - Available paper size is loaded in b...
Page 62 - When you select “Staple,” with the Saddle Finisher-G1 attached
1 Collating Copies (Finisher) 1-54 Basic Cop ying When you want hole punches made, press “Hole Punch.” When the Finisher-J1 is attached, the saddle stitch position cannot be selected. For details of the saddle stitch position, see the Reference Guide. ● When you select “Staple,” with the Saddle Fini...
Page 64 - Making Two-sided Copies from Facing Pages in a Book (Book
Two-sided Copying (Two-sided Mode) 1-56 Basic Cop ying 1 Two-sided Copying (Two-sided Mode) This function enables you to make two-sided copies from one- or two-sided originals or one-sided copies from two-sided originals. IMPORTANT • When the machine is operating in the Two-sided Mode, you cannot us...
Page 65 - Copy
1 Two-sided Copying (Two-sided Mode) 1-57 Basic Cop ying Making Two-sided Copies from One-sided Originals (1 2-Sided) This feature enables you to make two-sided copies from one-sided originals. IMPORTANT • Place the originals horizontally when copying originals that are LTRR or STMTR-size. If these ...
Page 66 - Press “1
1 Two-sided Copying (Two-sided Mode) 1-58 Basic Cop ying 2 Press “1 2-Sided.” To select the type of two-sided copy: press “Option” select the type of two-sided original press “Done.” 3 Press “OK.” The display returns to the Basic Features screen, and <1 2-Sided> is displayed above “Two-sided M...
Page 68 - Press “2
1 Two-sided Copying (Two-sided Mode) 1-60 Basic Cop ying 2 Press “2 2-Sided.” To select the type of two-sided copy: press “Option” select the type of two-sided original press “Done.” 3 Press “OK.” The display returns to the Basic Features screen, and <2 2-Sided> is displayed above “Two-sided M...
Page 74 - When scanning is completed, press “Done.”
1 Two-sided Copying (Two-sided Mode) 1-66 Basic Cop ying 3 Select the type of two-sided original, and press “OK.” If “Left/Right Two-sided” is selected, the left and right pages of a book or a magazine are copied to the front and back of a single sheet. If you select “Front/Back Two-sided,” the fron...
Page 75 - Reserved Copying; Place your original, and set the desired copy mode.
Reserved Copying 1-67 Basic Cop ying 1 Reserved Copying You can select copy settings and scan originals even if the machine is currently printing. Your scanned documents are processed after the current job is completed. NOTE • You can reserve up to five copy jobs for the Copy function, including the...
Page 78 - Once the original is scanned, remove it from the machine.
1 Interrupting the Current Job to Make Priority Copies (Interrupt Mode) 1-70 Basic Cop ying 4 Once the original is scanned, remove it from the machine. When the Interrupt copy job is completed, the interrupted printing operation resumes. IMPORTANT • If you want to continue making Interrupt copies, w...
Page 79 - Checking a Sample Set Before Copying; Place your originals, and select the desired copy settings.
Checking a Sample Set Before Copying (Sample Set) 1-71 Basic Cop ying 1 Checking a Sample Set Before Copying (Sample Set) Before making multiple copies, you can check the copy result using the Sample Set mode. IMPORTANT • “Sample Set” is displayed only when you set to make multiple copies of your or...
Page 82 - Checking the Copy Mode Settings; Press “Setting Confirmation” in the Basic Features screen.
Checking the Copy Mode Settings (Setting Confirmation) 1-74 Basic Cop ying 1 Checking the Copy Mode Settings (Setting Confirmation) When the copy mode settings are selected in screens, for example, the Special Features screen, you can check those settings in a list. 1 Press “Setting Confirmation” in ...
Page 83 - Changing or Canceling a Selected Copy Mode
Changing or Canceling a Selected Copy Mode (Setting Cancel) 1-75 Basic Cop ying 1 Changing or Canceling a Selected Copy Mode (Setting Cancel) From the Setting Confirmation screen, you can also change or cancel selected functions. 1 Press “Setting Confirmation” in the Basic Features screen. The Setti...
Page 84 - To cancel a mode
1 Changing or Canceling a Selected Copy Mode (Setting Cancel) 1-76 Basic Cop ying ● To change a mode (for example, Sharpness) Perform the same steps as when setting the mode. Change the setting as you desire, and press “OK.” The display returns to the Setting Confirmation screen. ● To cancel a mode ...
Page 85 - Useful Copy Functions
CHAPTER 2-1 2 Useful Copy Functions This chapter describes more advanced copy functions. Copying Facing Pages in a Book on Two Separate Sheets of Paper (Two-page Separation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Adding Front and Bac...
Page 86 - Useful Copy Functions; Useful Cop
2. Useful Copy Functions 2-2 Useful Cop y Functions 2 Making Sharp Contrast Copies (Sharpness) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-64
Page 87 - Place the original on the platen glass, and press “Special Features”
Copying Facing Pages in a Book on Two Separate Sheets of Paper (Two-page Separation) 2-3 Useful Cop y Functions 2 Copying Facing Pages in a Book on Two Separate Sheets of Paper (Two-page Separation) This mode enables you to copy facing pages in a book or a magazine onto separate sheets of paper. IMP...
Page 89 - Front Cover; Printed front cover selected in the Cover/Sheet Insertion mode
Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-5 Useful Cop y Functions 2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) This function enables you to set the machine to automatically add f...
Page 91 - Chapter Page; Place your originals, and press “Special Features”; Printed chapter page selected in the Cover/Sheet Insertion mode
2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-7 Useful Cop y Functions ■ Chapter Page Adds chapter pages between the pages of copy sets. Since the chapter page is always copied on one side, this function is useful when you want to divide th...
Page 92 - Make the following settings depending on the mode selected.
2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-8 Useful Cop y Functions 3 When copying onto the front cover, back cover, or sheet insertion, press “Printed,” and press “Next.” When setting Two-sided Copying, press “Option,” set the side to b...
Page 93 - When you select “Back Cover”:; When you select “Sheet Insertion” or “Chapter Page”:
2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-9 Useful Cop y Functions ● When you select “Back Cover”: Select the side to be copied onto, and press “Next.” ● When you select “Sheet Insertion” or “Chapter Page”: Set all positions where the s...
Page 94 - Select the paper source for each cover/sheet insertion
2 Adding Front and Back Covers, Sheet Insertions and Chapter Pages to Copy Sets (Cover/Sheet Insertion) 2-10 Useful Cop y Functions 5 Select the paper source for each cover/sheet insertion press “OK” press “Done.” The specified mode is set and the display returns to the Basic Features screen. IMPORT...
Page 95 - Making Copies for Use as a Booklet; Originals
Making Copies for Use as a Booklet (Booklet) 2-11 Useful Cop y Functions 2 Making Copies for Use as a Booklet (Booklet) You can copy one-sided or two-sided originals in such a way that the copies are made into a booklet. IMPORTANT • When the machine is operating in the Booklet mode, you cannot use t...
Page 96 - Select the original size, and press “Next.”
2 Making Copies for Use as a Booklet (Booklet) 2-12 Useful Cop y Functions 2 Select the original size, and press “Next.” If two-sided originals will be copied, also press “2-Sided Original” to select how the two-sided originals are to be saddle stitched, and press “OK.” NOTE • To select an A or B se...
Page 97 - When you select “Add Cover”:
2 Making Copies for Use as a Booklet (Booklet) 2-13 Useful Cop y Functions NOTE • Set the cover paper face down in the stack bypass. ● When you select “Add Cover”: Select “Yes” or “No” to specify whether or not to copy on the cover, and press “Next.” Select the type of paper, and press “Next.” IMPOR...
Page 98 - Select whether to saddle stitch the booklet, and press “OK”
2 Making Copies for Use as a Booklet (Booklet) 2-14 Useful Cop y Functions 4 Select whether to saddle stitch the booklet, and press “OK” press “Done.” The specified mode is set and the display returns to the Basic Features screen. NOTE • When the number of sheets exceeds 11, stapling is not performe...
Page 99 - When Not Printing on the Interleaf Sheets:
Making Copies with Sheets of Paper Interleaved Between Transparencies (Trans- parency Interleaving) 2-15 Useful Cop y Functions 2 Making Copies with Sheets of Paper Interleaved Between Transparencies (Transparency Interleaving) Use this mode when copying onto transparencies fed from the stack bypass...
Page 100 - When Printing on the Interleaf Sheets:; Place your original, and press “Special Features”; Select the size of the transparencies, and press “Next.”
2 Making Copies with Sheets of Paper Interleaved Between Transparencies (Trans-parency Interleaving) 2-16 Useful Cop y Functions ■ When Printing on the Interleaf Sheets: Outputs a printed transparency and a printed interleaf sheet alternately. 1 Place your original, and press “Special Features” pres...
Page 101 - Select the size of the interleaf sheet, and press “Next.”
2 Making Copies with Sheets of Paper Interleaved Between Transparencies (Trans- parency Interleaving) 2-17 Useful Cop y Functions 3 Select the size of the interleaf sheet, and press “Next.” 4 Select whether or not to copy the image onto the interleaf sheet, and press “OK” press “Done.” The selected ...
Page 102 - Place the transparencies in the stack bypass, and press
2 Making Copies with Sheets of Paper Interleaved Between Transparencies (Trans-parency Interleaving) 2-18 Useful Cop y Functions 5 Place the transparencies in the stack bypass, and press (Start). Scanning starts. When the original is placed on the platen glass, follow the instructions that appear on...
Page 103 - Making Copies with Original Image Shifted
Making Copies with Original Image Shifted (Shift) 2-19 Useful Cop y Functions 2 Making Copies with Original Image Shifted (Shift) Makes copies with the entire image shifted to the center or a corner. IMPORTANT • When the machine is operating in the Shift mode, you cannot use the Image Repeat or Mirr...
Page 107 - Making Copies with Margins
Making Copies with Margins (Margin) 2-23 Useful Cop y Functions 2 Making Copies with Margins (Margin) This mode enables you to make copies with the entire original image shifted by a designated width to the left, right, top, or bottom to create a margin on the copies. Use this mode to make copies re...
Page 109 - When you select “Left Margin” or “Right Margin”:
2 Making Copies with Margins (Margin) 2-25 Useful Cop y Functions ● When you select “Left Margin” or “Right Margin”: Use “–” or “+” to set the margin for the front and back (0" to 13/16" or 0 to 20mm). Then press “OK,” and press “Done.” The specified mode is set and the screen returns to the...
Page 110 - Erasing Shadows and Frame Lines from Copies; Original Frame Erase
Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-26 Useful Cop y Functions 2 Erasing Shadows and Frame Lines from Copies (Frame Erase) This mode erases shadows and lines that appear when copying various types of originals. IMPORTANT • Combination of the Original Frame Erase, Book Frame Er...
Page 113 - press
2 Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-29 Useful Cop y Functions 4 Select the desired original frame erase width using “-” or “+,” and press “OK” press “Done.” When entering values in millimeters, you can use - (numeric keys) and (Clear). Even when you enter the values with - ...
Page 115 - set
2 Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-31 Useful Cop y Functions 4 Press each key: “Top,” “Left,” “Center,” “Right,” and “Bottom” set the desired book frame erase width using “-” or “+” press “OK” “Done.” When entering values in millimeters, you can use - (numeric keys) and (C...
Page 116 - press “Frame Erase.”; Specify the binding erase feature, and press “Next.”
2 Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-32 Useful Cop y Functions 5 Press (Start). Copying starts. NOTE • To cancel the setting, press “Special Features” “Frame Erase” “Cancel,” in this order. • To cancel all settings and return the machine to the Standard mode, press (Reset). ...
Page 117 - Set the desired binding erase width using “–” or “+,” and press “OK”
2 Erasing Shadows and Frame Lines from Copies (Frame Erase) 2-33 Useful Cop y Functions The position of the binding holes refers not to the position in which the original is placed on the platen glass, but to the position of the binding holes viewed when the surface of the original that you want to ...
Page 120 - Select the size of the original, and press “Next.”
2 Reducing Two, Four, or Eight Originals to Fit on a Single Copy Sheet (Image Com-bination) 2-36 Useful Cop y Functions 1 Place your originals, and press “Special Features” press “Image Combination.” NOTE • When Auto Collate is set to “On,” the Collate mode or the Offset Collate mode is automaticall...
Page 121 - Select the desired Image Combination feature, and press “Next.”
2 Reducing Two, Four, or Eight Originals to Fit on a Single Copy Sheet (Image Com- bination) 2-37 Useful Cop y Functions 3 Select the desired Image Combination feature, and press “Next.” If you want to make two-sided copies, press “2-Sided Copy,” select the opening method, and press “OK.” Press “Opt...
Page 122 - Select the paper size, and press “OK”
2 Reducing Two, Four, or Eight Originals to Fit on a Single Copy Sheet (Image Com-bination) 2-38 Useful Cop y Functions 4 Select the paper size, and press “OK” press “Done.” The specified mode is set and the display returns to the Basic Features screen. IMPORTANT • You cannot set Automatic Paper Sel...
Page 125 - Select the layout of the final page of the original, and press “Next.”
2 Dividing an Original into Equal Sections and Enlarging Each Section on a Separate Copy Sheet (Image Separation) 2-41 Useful Cop y Functions If “2-Sided Copy” is selected, select the opening method, and press “OK.” 3 Select the layout of the final page of the original, and press “Next.” You can red...
Page 127 - Place your originals in the feeder, and press “Special Features”
Feeding Different-size Originals Together in the Feeder (Different Size Originals) 2-43 Useful Cop y Functions 2 Feeding Different-size Originals Together in the Feeder (Different Size Originals) This function enables you to copy different-size originals together in one group, by setting them in the...
Page 128 - Select the type of Different Size Originals mode, and press “OK”
2 Feeding Different-size Originals Together in the Feeder (Different Size Originals) 2-44 Useful Cop y Functions 2 Select the type of Different Size Originals mode, and press “OK” press “Done.” When you are setting originals of the same width, press “Same Width.” When you are setting originals of di...
Page 129 - Copying Separately-set Originals; Place your first original, and press “Special Features.”
Copying Separately-set Originals (Job Build) 2-45 Useful Cop y Functions 2 Copying Separately-set Originals (Job Build) This mode enables you to scan too many originals to set at once, by dividing them into multiple batches. You can use both the feeder and the platen glass for scanning. The original...
Page 130 - When scanning is completed, place the next original, and press
2 Copying Separately-set Originals (Job Build) 2-46 Useful Cop y Functions 2 Press “Job Build,” and press “Done.” The specified mode is set and the display returns to the Basic Features screen. 3 Press (Start). Scanning starts. NOTE • To cancel scanning, press “Cancel” or (Stop). 4 When scanning is ...
Page 131 - After the last original is scanned, press “Done.”
2 Copying Separately-set Originals (Job Build) 2-47 Useful Cop y Functions When scanning two-sided originals, press “2-sided Original.” Select the type of two-sided original, and press “OK.” - Do not forget to set or cancel the Two-sided Original mode according to the type of originals. Repeat this ...
Page 132 - Storing Copy Settings
Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-48 Useful Cop y Functions 2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) You can store any possible combination of the Copy functions, up to nine settings, in a memory key, and then name that key. It is useful...
Page 133 - Press “Mode Memory.”
2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-49 Useful Cop y Functions 2 Press “Mode Memory.” 3 Press “Store/Erase.” 4 Press “Store.”
Page 134 - If you select a memory key not already storing copy settings:
2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-50 Useful Cop y Functions 5 Select the desired memory key from among memory keys “M1” to “M9,” and press “Next.” NOTE • A mode memory key already storing copy settings shows a small, black square ( ■ ) in the lower right corner. ...
Page 135 - If you select a memory key already storing a copy setting:; Storing a Memory Key Name; Press “Special Features,” and press “Mode Memory.”
2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-51 Useful Cop y Functions ● If you select a memory key already storing a copy setting: Select “Yes” to overwrite the stored settings. Select “No” to cancel storing. When storing is completed, the message <Stored in memory.>...
Page 138 - Recalling Copy Settings; Erasing a Copy Job
2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-54 Useful Cop y Functions Recalling Copy Settings 1 Press “Special Features,” and press “Mode Memory.” 2 Select the memory key storing the copy settings you want to use confirm the stored settings press “OK” press “Done.” The dis...
Page 139 - Select a memory key to be erased, and press “Next.”
2 Storing/Recalling Often-used Copy Settings in Memory (Mode Memory) 2-55 Useful Cop y Functions 3 Press “Erase.” 4 Select a memory key to be erased, and press “Next.” The message appears to confirm that you want to erase the copy job. IMPORTANT • Check the copy settings before you erase them. NOTE ...
Page 141 - Recalling a Previous Copy Setting
Recalling a Previous Copy Setting (Recall) 2-57 Useful Cop y Functions 2 Recalling a Previous Copy Setting (Recall) With this function, you can recall up to three previous copy settings and make copies using these settings. IMPORTANT • One copy job is defined by setting the number of copies, exposur...
Page 142 - Inverting Original Images
Inverting Original Images (Nega/Posi) 2-58 Useful Cop y Functions 2 Inverting Original Images (Nega/Posi) This function enables you to make copies of the original image inverting the black and the white areas. 1 Place your originals, and press “Special Features” press “ ▼ .” 2 Press “Nega/Posi,” and...
Page 143 - Making Copies with the Original Image Repeated; Automatic Setting
Making Copies with the Original Image Repeated (Image Repeat) 2-59 Useful Cop y Functions 2 Making Copies with the Original Image Repeated (Image Repeat) You can repeatedly copy the image of an original in either the vertical or horizontal direction. The following two setting methods are available f...
Page 144 - Manual Setting; Automatic setting
2 Making Copies with the Original Image Repeated (Image Repeat) 2-60 Useful Cop y Functions ■ Manual Setting The original image is copied a specified number of times. IMPORTANT • When the machine is operating in the Image Repeat (manual setting) mode, you cannot use the Entire Image, Book 2-Sided, T...
Page 145 - Manual setting
2 Making Copies with the Original Image Repeated (Image Repeat) 2-61 Useful Cop y Functions ● Manual setting Press “–” or “+” to set the number of images. The number of times the image can be repeated is from 1 to 20. IMPORTANT • Depending on how many times you have manually set the image to be repe...
Page 146 - Making Copies with Image Reversed
Making Copies with Image Reversed (Mirror Image) 2-62 Useful Cop y Functions 2 Making Copies with Image Reversed (Mirror Image) This mode copies the image of the original reversed as a reflection in the mirror. IMPORTANT • When the machine is operating in the Mirror Image mode, you cannot use the En...
Page 148 - Making Sharp Contrast Copies
Making Sharp Contrast Copies (Sharpness) 2-64 Useful Cop y Functions 2 Making Sharp Contrast Copies (Sharpness) This mode allows you to make copies of original images with the contrast reproduced more sharply or more softly. To make copies with text or lines reproduced more sharply, use “High.” To m...
Page 152 - Copy Settings List; Additional Function
Copy Settings List 3-2 Setting/Stor ing Specifications of the Cop y Function 3 Copy Settings List The following items can be stored or set in the Copy Settings screen. Settings marked * are default settings.*1: Displayed only when the Feeder (DADF-H1) is attached.*2: Not displayed when the Finisher-...
Page 153 - ing Specifications of the Cop; Setting Standard Keys; Call up the desired screen as follows:
Setting Standard Keys 3-3 Setting/Stor ing Specifications of the Cop y Function 3 Setting Standard Keys You can store up to two Standard keys from the Copy Ratio, Finisher, and Two-sided Mode keys on the Basic Features screen, the keys on the Special Features screen, or the memory keys containing co...
Page 154 - Standard key 1 Standard key 2
3 Setting Standard Keys 3-4 Setting/Stor ing Specifications of the Cop y Function 3 Select the desired modes to be stored with the Standard key, and press “OK.” NOTE • To cancel storing, press “Cancel.” 4 Press “Done.” Repeat this procedure. The display returns to the Basic Features screen. Example:...
Page 155 - Setting Automatic Collate On/Off
Setting Automatic Collate On/Off 3-5 Setting/Stor ing Specifications of the Cop y Function 3 Setting Automatic Collate On/Off This mode allows automatic selection of the Collate (Offset Collate) mode when the original is placed in the feeder. This is helpful when making multiple copies, because you ...
Page 156 - Setting Image Orientation Priority to On/Off
Setting Image Orientation Priority to On/Off 3-6 Setting/Stor ing Specifications of the Cop y Function 3 Setting Image Orientation Priority to On/Off The image orientation may be printed conversely depending on the copy mode set. With this function, you can set whether or not to copy the image in th...
Page 157 - Setting the Job Duration Display
Setting the Job Duration Display 3-7 Setting/Stor ing Specifications of the Cop y Function 3 Setting the Job Duration Display When Job Duration Display is set to “On,” the time remaining until completion of the copy job (Job Duration Time) is indicated in minutes on the touch panel display. NOTE • T...
Page 158 - Setting Auto Orientation to On/Off
Setting Auto Orientation to On/Off 3-8 Setting/Stor ing Specifications of the Cop y Function 3 Setting Auto Orientation to On/Off Using parameters such as original size and zoom ratio, this function automatically rotates the image to the most suitable position for the specified paper size. NOTE • Th...
Page 159 - Setting the Photo Mode of the Copy Function
Setting the Photo Mode of the Copy Function 3-9 Setting/Stor ing Specifications of the Cop y Function 3 Setting the Photo Mode of the Copy Function You can set whether or not to use the Photo mode in the Copy function. When the Photo Mode is “On,” you can select “Printed Image” and “Photo” when maki...
Page 160 - Changing the Current Standard Settings; Storing New Standard Settings for Copying
Changing the Current Standard Settings 3-10 Setting/Stor ing Specifications of the Cop y Function 3 Changing the Current Standard Settings Standard Settings refers to a combination of Copy modes that the machine automatically sets after the power is turned on or when (Reset) is pressed. The Standard...
Page 161 - Initializing the Standard Settings
3 Changing the Current Standard Settings 3-11 Setting/Stor ing Specifications of the Cop y Function 3 Press “Yes.” To cancel storing the currently displayed settings as the Standard Settings, press “No.” This screen is displayed for about two seconds as the settings currently displayed are stored as...
Page 163 - Restoring Settings to Default Copy Settings
Restoring Settings to Default Copy Settings 3-13 Setting/Stor ing Specifications of the Cop y Function 3 Restoring Settings to Default Copy Settings Items that have been changed in the Copy Settings can be returned to their default settings. 1 Call up the desired screen as follows: 2 Press “Yes.” To...
Page 165 - Appendix
CHAPTER 4-1 4 Appendix Chart of Available Combination of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Page 166 - Chart of Available Combination of Functions
Chart of Available Combination of Functions 4-2 Appendix 4 Chart of Available Combination of Functions The chart shows the settings combinations when you want to reconfigure the functions. EnlargementZoom Designation XY ZoomAuto Zoom modeZoom ProgramEntire ImageAutomatic Exposure ControlPrinted Imag...
Page 170 - Index
Index 4-6 Appendix 4 Index 1 to 2 ......................................................................................................................................... 2-391 to 4 ........................................................................................................................